Abstract
Tha aim of the present study was to develop a series of numerical models for an accurate prediction of the power consumption in ultrafiltration of simulated latex effluent. The developed power consumption model incorporated fouling attachment, as well as chemical and physical factors in membrane fouling, in order to ensure accurate prediction and scale-up. This model was applied to heterogeneous membranes with non-uniform pore sizes at a given operating conditions and mem- brane surface charges. Polysulfone flat membrane, with a membrane molecular weight cutoff (MWCO) of 60,000 dalton, at different surface charges was used under a constant flow rate and cross-flow mode. In addition, the developed models were examined using various membranes at a variety of surface charges so as to test the overall reliability and accuracy of these models. The power consumption predicted by the models corresponded to the calculated values from the experimental data for various hydrophilic and hydrophobic membranes with an error margin of 6.0% up to 19.1%.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. Kennedy, J. Kamanyi, S. Rodriguez, N. Lee, J. Schippers and G. Amy, Adv. Membr. Technol. Appl., 131 (2008).
M. H. Javacek and F. Bouchet, J. Membr. Sci., 82, 285 (1993).
R. Thiruvenkatachari, W.G. Shim, J.W. Lee and H. moon, Korean J. Chem. Eng., 22(2), 250 (2205).
S. Kosvintsev, I. W. Cumming, R. G. Holdich, D. Lloyd and V. M. Starov, Colloids Surf., A, 230, 167 (2004).
J. lozier and A Jacangelo, Where we are head ?- the future of membrane treatement, in Proceedings of Water Quality Technology Conference, November 10-14, 2002, Seattle, WA.
A. Al-Amoudi and R. W. Lovitt, J. Membr. Sci., 303, 4 (2007).
A. Hu and D. Stuckey, J. Environ. Eng., 132(2), 190 (2006).
H. B. Winzeler and G. Belfort, J. Membr. Sci., 80, 35 (1993).
S. A. Avlonitis, K. Kouroumbas and N. Vlachakis, Desalination, 157, 151 (2003).
A. H. Bahnasawy and M. E. Shenana, Aust. J. Agric. Eng., 15, 54 (2010).
D. Suman, S. Projjwal, B. Chiranjib and D. Siddhartha, J. Environ. Pollut., 49(3-4), 197 (2012).
J. Jurado and B. J. Bellhouse, Filtr. Sep., 273 (1994).
F. Knops and H Futselaar, J. Membr. Sci., 73, 153 (1992).
A. Abdelrasoul, H. Doan and A. Lohi, Can. J. Chem. Eng., 92(7), 1293 (2014).
A. Abdelrasoul, H. Doan, A. Lohi and C.-H. Cheng, Ind. Eng. Chem. Res., 53, 9897 (2014).
A. Abdelrasoul, H. Doan, A. Lohi and C.-H. Cheng, Sep. Purif. Technol., 135, 199 (2014).
A. Abdelrasoul, H. Doan and A. Lohi, J. Membr. Sep. Technol., 2, 134 (2013).
A. Abdelrasoul, H. Doan and A. Lohi, Fouling in Membrane Filtration and Remediation Methods, Mass Transfer - Advances in Sustainable Energy and Environment Oriented Numerical Modeling, Dr. Hironori Nakajima (Ed. ), Intech Open Access Publisher, 195 (2013).
A. Abdelrasoul, H. Doan and A. Lohi, J. Membr. Sci., 433, 88 (2013).
A. Abdelrasoul, H. Doan, A. Lohi and C.-H. Cheng, Can. J. Chem. Eng. (2014), DOI:10. 1002/cjce.22056.
D. C. Montgomery, Design and Analysis of Experiment, 5th Ed., Wiley, Inc., New York, USA (1997).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abdelrasoul, A., Doan, H., Lohi, A. et al. Prediction of power consumption and performance in ultrafiltration of simulated latex effluent using non-uniform pore sized membranes. Korean J. Chem. Eng. 33, 1014–1027 (2016). https://doi.org/10.1007/s11814-015-0206-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0206-8