Abstract
The separation of NGL (natural gas liquids) in gas processing is energy-intensive, requiring systematic process design and optimization to reduce energy consumption and to identify cost-effective solutions for the recovery valuable hydrocarbons. As NGL fractionation processes require a sequence of distillation columns to separate multi-component mixtures the determination of optimal energy-efficient distillation sequences and operating conditions is not a simple task. A design methodology is proposed in this study in which the process simulator Aspen HYSYS® is linked with an optimization algorithm available in MATLAB®. The proposed methodology involves a procedure where in the first step possible distillation sequences are screened using a short-cut distillation column model. In the second step a few selected and promising candidate distillation sequences are further simulated and optimized, again using the same short-cut model. Finally, rigorous simulations are used to validate and confirm the feasibility of the optimal designs. A case study is presented to demonstrate the applicability of the proposed design framework for the design and optimization of NGL fractionation processes in practice.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
N. V. D. Long and M. Lee, Asia-Pac. J. Chem. Eng., 6, 338 (2011).
E. Rév, M. Emtir, Z. Szitkai, P. Mizsey and Z. Fonyó, Comput. Chem. Eng., 25, 119 (2001).
M. A. Schultz, D. G. Stewart, J. M. Harris, S. P. Rosenblum, M. S. Shakur and D. E. O’Brien, Chem. Eng. Prog., 98, 64 (2002).
R. Smith, Chemical Process Design and Integration, Wiley, Chichester (2005).
I. C. Kemp, Pinch Analysis and Process Integration, 2nd Ed., Butterworth- Heinemann, Oxford (2007).
M. Errico and B. G. Rong, Comput. Chem. Eng., 36, 160 (2012).
N. V. D. Long and M. Lee, Energy, 57, 663 (2013).
N. V. D. Long and M. Lee, Ind. Eng. Chem. Res., 52, 12635 (2013).
N. V. D. Long and M. Lee, J. Chem. Eng. Jpn., 45, 285 (2012).
N. V. D. Long and M. Lee, Korean J. Chem. Eng., 30, 286 (2013).
N. V. D. Long and M. Lee, Energy, 81, 103 (2015).
F. B. Petlyuk, V. M. Platonov and D. M. Slavinskii, Int. Chem. Eng., 5, 309 (1965).
C. Triantafyllou and R. Smith, Chem. Eng. Res. Des., 70, 118 (1992).
P. Shah and A. Kokossis, AIChE J., 48, 527 (2002).
J. A. Caballero and I. E. Grossmann, Comput. Chem. Eng., 61, 118 (2014).
W.-Z. An and X.-G. Yuan, Comput. Chem. Eng., 33, 199 (2009).
S. Jain, R. Smith and J. Kim, J. Taiwan Inst. Chem. Eng., 43, 525 (2012).
W. D. Seider, J. D. Seader and D. R. Lewin, Process Design Principles, 2nd Ed., Wiley, New York (2004).
H. Z. Kister, Distillation Design, McGraw-Hill, New York (1992).
L. Linsley, Oil and Gas, 95, 58 (1997).
B. Fleming and A. W. Sloley, Proceedings of the ChemShow and Exposition, New York (1995).
Y. J. Cao and Q. H. Wu, Int. J. Electr. Eng. Educ., 36, 139 (1999).
D. B. Manley, Latin Am. Appl. Res. J., 28, 211 (1998).
R. Smith and P. Varbanov, Chemical Engineering Progress, 101, 29 (2005).
Engineering data book, 13th Ed., Gas Processors Suppliers Association, Tulsa (2012).
M. Peters, K. Timmerhaus and R. West, Plant Design and Economics for Chemical Engineers, 5th Ed., McGraw-Hill, New York (2003).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yoo, H., Binns, M., Jang, MG. et al. A design procedure for heat-integrated distillation column sequencing of natural gas liquid fractionation processes. Korean J. Chem. Eng. 33, 405–415 (2016). https://doi.org/10.1007/s11814-015-0139-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0139-2