Abstract
The hydrodynamic characteristics of bubbles in bubbling fluidized beds with internals were investigated. The signal range of the optical fiber probe was calibrated from 0.5 V (the bubble phase) to 4.5 V (the emulsion phase). Data sampling involved an optical probe at a rate of 903Hz for 725 s. To obtain improved bubble data, the data were analyzed by three processes: threshold determination, bubble analysis, and erroneous bubble elimination. The data on the bubble rise velocity and bubble frequency were measured and compared to the bed height (0.2–0.7 m), superficial gas velocity (4–7 U mf ), radial position r/R (0.22–0.95), number of distributor nozzles (2, 3, and 7), and the use of the internals with different hydraulic diameters of 0.19, 0.17, and 0.15 m. The experimental data were compared with several reported empirical correlations. Both the bubble rise velocity and bubble frequency increased with decreasing number of distributor nozzles. Furthermore, in the presence of internals, the bubble rise velocity decreased, whereas the bubble frequency increased with decreasing hydraulic diameter of the cross-sectional area divided by internals. Moreover, bubble breaking occurred at a specific position of r/R=0.7, not at the edge of the internals.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. H. Han, News & Information for Chemical Engineers, 31, 313 (2013).
L.R. Glicksman, W. K. Lord, M. Sakagami, Chem. Eng. Sci., 42, 479 (1987).
Y. Jin, F. Wei and Y. Wang, Effect of Internal Tubes and Baffles, Handbook of Fluidization and Fluid-Particle Systems, Ed. by Yang, W. C., Marcel Dekker, Inc., New York (2003).
P. Jiang, H.T. Bi, R.H. Jean and L.S. Fan, AIChE J., 37, 1392 (1991).
C. G. Zheng, Y.K. Tung, Y. S. Xia, B. Hun and M. Kwauk, Voidage redistribution by ring internals in fast fluidizationm, Fluidization ′91, 168 (1991).
C.G. Zheng, Y.K. Tung, H.Z. Li and M. Kwauk, Characteristics of fast fluidized beds with internals, Fluidization VII, 275 (1992).
J. X. Zhu, M. Salah and Y. M. Zhou, J. Chem. Eng. Jpn., 30, 928 (1997).
Karri SBR, PSRI Research Report No. 60 (1990).
Karri SBR, Grid Design Chapter, PSRI Design Manual (1991).
J. H. Lim, Y. Lee, J. H. Shin, K. Bae, J. H. Han and D. H. Lee, Powder Technol., 266, 312 (2014).
T. Knowlton, R. Karri and R. Cocco, PSRI Fluidization Seminar and Workshop, Particulate Solid Research Inc. (2011).
C.Y. Wen, N.R. Deole and L. H. Chen, Powder Technol., 31, 175 (1982).
J. M. Schweitzer, J. Bayle and T. Gauthier, Chem. Eng. Sci., 56, 1103 (2001).
J. Zhang, Bubble columns and three-phase fluidized beds: Flow regimes and bubble characteristics, Ph. D. Thesis, The University of British Columbia (1996).
C. Sobrino, J. A. Almendros-Ibanez, D. Santana, C. Vazquez and M. de Vega, Chem. Eng. Sci., 64, 2307 (2009).
S. Karimipour and T. Pugsley, Powder Technol., 205, 1 (2011).
J. F. Davidson and D. Harrison, Fluidized particles, Cambridge University Press, London (1963).
R.C. Darton, R.D. La Naueza, J. F. Davidson and D. Harrison, Trans. Inst. Chem. Eng., 55, 274 (1977).
S. Mori and C. Y. Wen, AIChE J., 21, 109 (1975).
P. Cai, M. Schiavetti, G.D. Michele and G. C. Grazzini, Powder Technol., 80, 99 (1994).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lim, JH., Shin, JH., Bae, K. et al. Hydrodynamic characteristics of bubbles in bubbling fluidized bed with internals. Korean J. Chem. Eng. 32, 1938–1944 (2015). https://doi.org/10.1007/s11814-015-0131-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-015-0131-x