Abstract
This study presents an efficient design method for DWC which can fractionate palm methyl esters (PME, biodiesel) into three more valuable product groups: a mixture of methyl laurate and methyl myristate as light-cut, pure methyl palmitate (≥99.5%) as middle cut, and the mixture of the remaining methyl esters (biodiesel), which has good low-temperature operability to such an extent as to come close to cold filter plugging point (CFPP) 0 °C, as heavy cut. The first step of the design was to determine numbers of stages for four sub-sections of DWC, liquid split ratio, and initial reflux ratio by the shortcut design, based on the component net flow model and the method of Fenske, Underwood, and Gilliland (FUG method). Secondly, optimal reflux ratio, vapor split ratio, locations of stages for feed and side product were found out by sensitivity analysis in rigorous simulation. The results from the simulation model developed by the method show that the reboiler duty of a single DWC is about 24% less than that of two simple columns in direct sequence and about 25% less than in indirect sequence. These energy saving ratios are almost close to 30%, which is popularly known as a typical value for energy saving of DWC.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
P. Lv, Y. Cheng, L. Yang, Z. Yuan, H. Li and W. Luo, Fuel Process. Technol., 110, 61 (2013).
B. R. Moser, In Vitro Cell. Dev. Biol. Plant, 45, 229 (2009).
G.C. Gervajio, Bailey’s industrial oil and fat products, 6th Ed., Wiley, New Jersey, 1 (2005).
S. C. Smolinske, Handbook of food, drug, and cosmetic excipients, CRC Press, Boca Raton, FL, 75 (1992).
http://www.chemithon.com/Resources/pdfs/Surfactant.pdf (last accessed, August 2013).
R. O. Dunn and B. R. Moser, The biodiesel handbook, second Ed., AOCS Press, Urbana, IL, 147 (2010).
J. Y. Park, D. K. Kim, J. P. Lee, S. C. Park, Y. J. Kim and J. S. Lee, Bioresour. Technol., 99, 1196 (2008).
B. R. Moser, Energy Fuels, 22, 4301 (2008).
T. C. Ming, N. Ramli, O. T. Lye, M. Said and Z. Kasim, Eur. J. Lipid Sci. Technol., 107, 505 (2005).
Y. M. Choo, S. F. Cheng, C. L. Yung, L. N. N. Harrison, A. N. Ma and B. Yusof, US Patent, 8,246,699 (2012).
S. Heck, V. Winterhoff, B. Gutsche, G. Fieg, U. Mueller and J. Rigal, US Patent, 7,064,223 (2006).
Y. M. Choo, L. N. N. Harrison, C. L. Yung, M. H. Ng, C.W. Puah, A. M. Rusnani et al., http://palmoilis.mpob.gov.my/publications/TOT/TT-428.pdf (last accessed, August 2013).
N. Asprion and G. Kaibel, Chem. Eng. Process, 49, 139 (2010).
N. V. D. Long, S. H. Lee and M. Y. Lee, Chem. Eng. Process, 49, 825 (2010).
N. V. D. Long and M. Y. Lee, Korean J. Chem. Eng., 29, 567 (2012).
N. V. D. Long and M. Y. Lee, J. Chem. Eng. Japan, 45, 285 (2012).
L. Q. Minh, N. V. D. Long and M. Y. Lee, Korean J. Chem. Eng., 29, 1500 (2012).
S. G. Lee, N. V. D. Long and M. Y. Lee, Ind. Eng. Chem. Res., 51, 10021 (2012).
Y. H. Kim, M. Nakaiwa and K. S. Hwang, Korean J. Chem. Eng., 19, 383 (2002).
Y. H. Kim, K. S. Hwang and M. Nakaiwa, Korean J. Chem. Eng., 21, 098 (2004).
I. Dejanović, Lj. Matijašević and Ž. Olujić, Chem. Eng. Process., 49, 559 (2010).
K. T. Chu, L. Cadoret, C. C. Yu and J. D. Ward, Ind. Eng. Chem. Res., 50, 9221 (2011).
R. O. Dunn, Soybean — Applications and technology, InTech, 211 (2011).
M. E. G. Gómez, R. H. Hildige, J. J. Leahy and B. Rice, Fuel, 81, 33 (2012).
M. J. Ramos, C. M. Fernández, A. Casas, L. Rodríguez and Á. Pérez, Bioresour. Technol., 100, 261 (2009).
K. A. Amminudin, R. Smith, Y. C. Thong and G. P. Towler, Chem. Eng. Res. Des., 79, 701 (2001).
A. I. Kakhu and J. R. Flower, Chem. Eng. Res. Des., 66, 241 (1988).
G. Dünnebier and C. C. Pantelides, Ind. Eng. Chem. Res., 38, 162 (1999).
J. A. Caballero and I. E. Grossman, Ind. Eng. Chem. Res., 40, 2260 (2001).
P. Wang, H. Chen, Y. Wang, L. Zhang, K. Huang and S. J. Wang, Chem. Eng. Commun., 199, 608 (2012).
I. J. Halvorsen and S. Skogestad, Ind. Eng. Chem. Res., 42, 605 (2003).
Z. Fidkowski and L. Krolikowski, AIChE J., 32, 537 (1986).
Z. Fidkowski and L. Krolikowski, AIChE J., 33, 643 (1987).
C. Triantafyllou and R. Smith, Chem. Eng. Res. Des., 70, 118 (1992).
Y. H. Kim, Chem. Eng. J., 85, 289 (2002).
N. V. D. Long and M. Y. Lee, Comput. Chem. Eng., 37, 119 (2012).
V. K. Sangal, V. Kumar and I. M. Mishra, Comput. Chem. Eng., 40, 33 (2012).
N. V. D. Long and M. Y. Lee, Korean J. Chem. Eng., 30, 286 (2013).
I. J. Halvorsen, PhD thesis, Department of Chemical Engineering, Norwegian University of Science and Technology, Trondheim, 352 (2001).
A. J. Underwood, Chem. Eng. Prog., 44, 603 (1948).
J. Stichlmair, Chem. Ing. Technol., 60, 747 (1988).
I. J. Halvorsen and S. Skogestad, Ind. Eng. Chem. Res., 43, 3994 (2004).
H. E. Edulgee, Hydrocarbon Process, 54, 120 (1975).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, H.J., Choi, S.H., Kim, T.Y. et al. Design of a dividing wall column for fractionation of biodiesel. Korean J. Chem. Eng. 32, 1229–1242 (2015). https://doi.org/10.1007/s11814-014-0347-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-014-0347-1