Abstract
A three-dimensional CFD model of SCR converter with detailed chemistry is developed. The model is used to study the effects of radial variation in inlet ammonia profile on SCR emission performance at different temperatures. The model shows that radial variation in inlet ammonia concentration affects the SCR performance in the operating range of 200–400 °C. In automotive SCR systems, ammonia is non-uniformly distributed due to evaporation/reaction of injected urea, and using a 1D model or a 3D model with flat ammonia profile at inlet for these conditions can result in erroneous emission prediction. The 3D SCR model is also used to study the effect of converter design parameters like inlet cone angle and monolith cell density on the SCR performance for a non-uniform ammonia concentration profile at the inlet. The performance of SCR is evaluated using DeNO x efficiency and ammonia slip.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
C. Lambert, R. Hammerle, R. McGill, M. Khair and C. Sharp, Technical advantages of urea SCR for light-duty and heavy-duty diesel vehicle applications, SAE 2004-01-1292 (2004).
L. Olsson, H. Sjövall and R. J. Blint, Appl. Catal. B: Environ., 81, 203 (2008).
J. C. Wurzenberger and R. Wanker, Multi-scale SCR modeling, 1D kinetic analysis and 3D system simulation, SAE 2005-01-0948 (2005).
X. Zhang and M. Romzek, Computational fluid dynamics (CFD) applications in vehicle exhaust system, SAE 2008-01-0612 (2008).
S.-J. Jeong, S.-J. Lee, W.-S. Kim and C. B. Lee, Simulation on the optimum shape and location of urea injector for urea-SCR system of heavy-duty diesel engine to prevent NH 3 slip, SAE 2005-01-3886.
M. Koebel, M. Elsener and M. Kleemann, Catal. Today, 59, 335 (2000).
S. D. Yim, S. J. Kim, J. H. Baik, I.-S. Nam, Y. S. Mok, J.-H. Lee, B. K. Cho and S. H. Oh, Decomposition of Urea into NH 3 for the SCR Process, American Chemical Society, 43, 4856 (2004).
T. L. McKinley, A.G. Alleyne and C.-F. Lee, Mixture non-uniformity in SCR systems: Modeling and uniformity index requirements for steady-state and transient operation, SAE 2010-01-0883 (2010).
Å. Johansson, U. Wallin, M. Karlsson, A. Isaksson and P. Bush, Investigation on uniformity indices used for diesel exhaust aftertreatment systems, SAE 2008-01-0613 (2008).
G. Zheng, G. Palmer, G. Salanta and A. Kotrba, Mixer development for urea SCR applications, SAE 2009-01-2879 (2009).
X. Zhang and M. Romzek, 3-D numerical study of flow mixing in front of SCR for different injection systems, SAE 2007-01-1578 (2007).
I. Cho, S. Lee, H. Kang and D. S. Baik, A study on the NO x reduction of urea-selective catalytic reduction (SCR) system in a heavyduty diesel engine, SAE 2007-01-3447 (2007).
S.-J. Jeong, S.-J. Lee, W.-S. Kim and C. B. Lee, Simulation on the optimum shape and location of urea injector for urea-SCR system of heavy-duty diesel engine to prevent NH 3 slip, SAE 2005-01-3886 (2005).
van R. Helden, R. Verbeek, F. Willems and R. vander Welle, Optimization of urea SCR deNO x systems for HD diesel engines, SAE 2004-01-0154 (2004).
P. Way, K. Viswanathan, P. Preethi, A. Gilb, N. Zambon and J. Blaisdell, SCR performance optimization through advancements in after-treatment packaging, SAE 2009-01-0633 (2009).
Y. Yi, Development of a 3D numerical model for predicting spray, urea decomposition and mixing in SCR systems, SAE 2007-01-3985 (2007).
M. Chen and S. Williams, Modelling and optimization of SCRexhaust aftertreatment systems, SAE 2005-01-0969 (2005).
X. Zhang, T. Gomulka and M. Romzek, Numerical optimization of flow uniformity inside an F-oval substrate, SAE 2007-01-1088 (2007).
M. Karlsson, U. Wallin, S. Fredholm, J. Jansson, G.-O. Wahlström, C. M. Schär, C. H. Onder and L. Guzzella, A Combined 3D/lumped modeling approach to ammonia SCR after-treatment systems: Application to mixer designs, SAE 2006-01-0469 (2006).
S. F. Benjamin and C. A. Roberts, The porous medium approach applied to CFD modelling of SCR in an automotive exhaust with injection of urea droplets, in IMechE Conference Internal Combustion Engines: Performance, Fuel Economy and Emissions, London (2007).
N. Tamaldin, C. A. Roberts and S. F. Benjamin, Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach, SAE 2010-01-1177 (2010).
H. J. Chae, S. T. Choo, H. Choi, I.-S. Nam, H. S. Yang and S. L. Song, Ind. Eng. Chem. Res., 39, 1159 (2000).
A. Frobert, Y. Creff, S. Raux, C. Charial, A. Audouin and L. Gagnepain, SCR for passenger car: Ammonia-storage issue on a Fe-ZSM5 catalyst, SAE 2009-01-1929 (2009).
STAR-CD, STAR-CD Users Guide and Methodology, version 4.12, Computational Dynamics Ltd. (2010).
V. Yakhot, S. A. Orszag, S. Thangam, T. B. Gatski and C.G. Speziale, Phys. Fluids A: Fluid Dynamics, 4, 1510 (1992).
W. M. Kays and W. Morrow, Compact heat exchangers, McGraw-Hill Book Company (1964).
S.-J. Jeong and W.-S. Kim, Chem. Eng. Process., 42, 879 (2003).
J. Breuer, R. Brück, R. Diewald and P. Hirth, Temperature examinations on a metal catalyst system, SAE 971028 (1997).
K. Narayanaswamy and Y. He, Modeling of copper-zeolite and ironzeolite selective catalytic reduction (SCR) catalysts at steady state and transient conditions, SAE 2008-01-0615 (2008).
K.W. Hughes, D. Gian and J. Calleja, Relative benefits of various cell density ceramic substrates in different regions of the FTP cycle, SAE 2006-01-1065 (2006).
S. C. Lauderdale, S. T. Nickerson, J. D. Pesansky and C.M. Sorensen, Impact of ceramic substrate web thickness on emission light-off, pressure drop, and strength, SAE 2008-01-0808 (2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Paramadayalan, T., Pant, A. Selective catalytic reduction converter design: The effect of ammonia nonuniformity at inlet. Korean J. Chem. Eng. 30, 2170–2177 (2013). https://doi.org/10.1007/s11814-013-0155-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-013-0155-z