Abstract
A pinch-based approach has been used to calculate optimum values of CO2 capture and storage (CCS) retrofit and compensatory renewable power for the Korean electricity sector. Three cases are proposed. In the first case, KEPCO 2020 power generation forecast data were used to calculate CO2 emissions and a 30% emission reduction target applied. For the second case, nuclear-free KEPCO 2020 forecast was used to calculate emissions along with 30% emissions reduction. In the third case, the emissions reduction target increased from 30% to 54.50% for case-2 scenario, in order to achieve 2005 emissions level. Results show that CCS retrofit and compensatory renewable power for case 3 is 2.6 times higher than case 1 and 1.8 times higher than case 2. According to sensitivity analysis results, CCS retrofit and compensatory renewable power for case 3 is more sensitive to CO2 removal ratio and parasitic energy loss ratio, respectively, as compared to case 1 and case 2.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
R. Quadrelli and S. Peterson, Energy Policy, 35(11), 5538 (2007).
D. Weisser, Energy, 32(9), 1543 (2007).
M. Jefferson, Energy Policy, 36(11), 4116 (2008).
B. J. P. Buhre, L. K. Elliot, C. D. Sheng, R. P. Gupta and T. F. Wall, Progress in Energy and Combustion Science, 31(4), 283 (2005).
Wall TF, Proceedings of the Combustion Institute, 31(1), 31 (2007).
H. Yang, Z. Xu, M. Fan, R. Gupta, R. B. Slimane and A. E. Bland, J. Environ. Sci., 20(1), 14 (2008).
K. Riahi, E. S. Rubin and L. Schattenholzer, Energy, 29(9–10), 1309 (2004).
K. Andersson and F. Johnsson, Energy Convers. Manage., 47(18–19), 3487 (2006).
U. Lee, Y. Lim, S. Lee, J. Jung and C. Han, Ind. Eng. Chem. Res., 51(1), 389 (2012).
B. F. Moller, M. Assadi and I. Potts, Energy, 31(10–11), 1520 (2006).
J. Jung, Y. Lim, Y. S. Jeong, U. Lee, S. Yang and C. Han, Korean Chem. Eng. Res., 49(6), 764 (2011).
http://www.reuters.com/article/2011/06/15/energy-summit-koreaidUSL3E7HF0VV20110615.
B. Linnhoff, D.W. Townsend, D. Boland, G. F. Hewitt, B. E.A. Thomas and A. R. Guy, A user guide on process integration for the efficient use of energy, Institution of Chemical Engineers, Rugby (1982).
M.M. El-Halwagi and V. Manousiothakis, AIChE J., 36(8), 1209 (1990).
M. M. El-Halwagi, Pollution prevention through process integration: Systematic design tools, Academic Press, San Diego (1997).
M. M. El-Halwagi, Process integration, Elsevier Inc., Amsterdam (2006).
Y. P. Wang and R. Smith, Chem. Eng. Sci., 49(7), 981 (1994).
N. Hallale, Adv. Environ. Res., 6(3), 377 (2002).
M.M. El-Halwagi, F. Gabriel and D. Harrel, Ind. Eng. Chem. Res., 42(19), 4319 (2003).
Z. A. Manan, Y. L. Tan and D.C.Y. Foo, AIChE J., 50(12), 3169 (2004).
R. Prakash and U.V. Shenoy, Chem. Eng. Sci., 60(1), 255 (2005).
D. K. S. Ng, D. C. Y. Foo and R. R. Tan, Ind. Eng. Chem. Res., 46(26), 9107 (2007).
D. K. S. Ng, D. C. Y. Foo and R. R. Tan, Ind. Eng. Chem. Res., 46(26), 9114 (2007).
G. P. Towler, R. Mann, A. J.-L. Serriere and C.M. D. Gabaude, Ind. Eng. Chem. Res., 35(7), 2378 (1996).
J. J. Alves and G. P. Towler, Ind. Eng. Chem. Res., 41(23), 5759 (2002).
V. Agrawal and U. V. Shenoy, AIChE J., 52(3), 1071 (2006).
D. C.Y. Foo and Z. A. Manan, Ind. Eng. Chem. Res., 45(17), 5986 (2006).
V. Kazantzi and M. M. El-Halwagi, Chem. Eng. Progress, 101(8), 28 (2005).
D. C. Y. Foo, V. Kazantzi, M.M. El-Halwagi and Z. A. Manan, Chem. Eng. Sci., 61(8), 2626 (2006).
R. Smith and O. Delaby, Chem. Eng. Res. Design, 69(6), 492 (1992).
V. R. Dhole and B. Linnhoff, Computer Chem. Eng., 17(S1), S101 (1993).
B. Linnhoff and V. R. Dhole, Chem. Eng. Technol., 16(4), 252 (1993).
J. Klemeš, V. R. Dhole, K. Raissi, S. J. Perry and L. Puigjaner, Appl. Thermal Eng., 17(8–10), 993 (1997).
A. Goršek, P. Glaviè and M. Bogataj, Chemical Engineering and Processing: Process Intensification, 45(5), 372 (2006).
S. Perry, J. Klemeš and I. Bulatov, Energy, 33(10), 1489 (2008).
R. R. Tan and D. C. Y. Foo, Energy, 32(8), 1422 (2007).
S. C. Lee, D. K. S. Ng, D. C.Y. Foo and R. R. Tan, Appl. Energy, 86(1), 60 (2009).
D. C.Y. Foo, R. R. Tan and D. K. S. Ng, Energy, 33(10), 1480 (2008).
D. Crilly and T. Zhelev, Energy, 33(10), 1498 (2008).
M. J. Atkins, A. S. Morrison and M. R. W. Walmsley, Paper presented in Society of Chemical Engineers New Zealand Annual Conference (SCENZ08), New Zealand (2008).
Raymond R. Tan, Denny Kok Sum Ng and Dominic Chwan Yee Foo, Journal of Cleaner Production, 17(10), 940 (2009).
http://www.greengrowth.go.kr/english/en_subpolicy/en_greenhouse/en_greenhouse.cms.
Table 2.16, The 5th Basic Plan for Long-term Electricity Supply and Demand (2010–2024) http://cyber.kepco.co.kr/kepco_new/eng/ir/resource/powerStatistics.jsp?gubun=J.
http://en.wikipedia.org/wiki/Fukushima_Daiichi_Nuclear_Power_Plant#Nuclear_disaster_of_2011.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ilyas, M., Lim, Y. & Han, C. Pinch based approach to estimate CO2 capture and storage retrofit and compensatory renewable power for South Korean electricity sector. Korean J. Chem. Eng. 29, 1163–1170 (2012). https://doi.org/10.1007/s11814-011-0302-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-011-0302-3