Abstract
Silica-supported molybdenum phosphide, MoP/SiO2 catalysts with different Mo weight loadings were prepared by temperature programmed reduction of the oxidic catalyst precursors, which were prepared via sol-gel technique using ethyl silicate-40 as silica source. Samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), BET surface area measurements, and their catalytic activity in hydrodesulfurization (HDS) was tested with dibenzothiophene (DBT) as model compound. XRD analysis revealed the amorphous nature of the catalyst up to 10 wt% Mo loading and the formation of crystalline MoP phase on amorphous silica support with higher Mo loading. BET surface area showed high surface area for catalysts prepared by sol-gel technique with lower Mo content, and the surface area decreased with increasing in Mo loading. The HDS results showed that prepared MoP/SiO2 exhibited high HDS activity and stability toward the catalytic test. Among the series of catalysts prepared, MoP/SiO2 containing 20 wt% Mo was found to be the most active catalyst. And the effects of reaction temperature and hydrogen pressure on conversion and product selectivity were investigated.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. T. Oyama, J. Catal., 216, 343 (2003).
E. Furimsky, Appl. Catal. A, 240, 1 (2003).
J.H. Koh, A. Cho, S. Lee and S.H. Moon, Korean J. Chem. Eng., 26, 999 (2009).
H. Yamada and S. Goto, Korean J. Chem. Eng., 21, 773 (2004).
P. Liu and J. A. Rodriguez, Catal. Lett., 91, 247 (2003).
R. Cheng, Y. Shu, L. Li, M. Zheng, X. Wang, A. Wang and T. Zhang, Appl. Catal. A, 316, 160 (2007).
P. Clark, W. Li and S. T. Oyama, J. Catal., 200, 140 (2001).
S. J. Sawhill, K. A. Layman and D. R. Van Wyk, J. Catal., 231, 300 (2005).
S. L. Brock and K. Senevirathne, J. Solid State Chem., 181, 1552 (2008).
P.A. Clark, X. Wang and S. T. Oyama, J. Catal., 207, 256 (2002).
C. Stinner, R. Prins and Th. Weber, J. Catal., 191, 438 (2000).
D.C. Phillips, S. J. Sawhill, R. Self and M. E. Bussell, J. Catal., 207, 266 (2002).
P. A. Clark and S. T. Oyama, J. Catal., 218, 78 (2003).
S. T. Oyama, P. Clark, V. L. S. Teixeira da Silva, E. J. Lede and F.G. Requejo, J. Phys. Chem. B, 105, 4961 (2001).
Y. Shu and S. T. Oyama, Carbon, 43, 1517 (2005).
R. S. Wise and E. J. Markel, J. Catal., 145, 344 (1994).
A.V. Biradar, S. B. Umbarkar and M.K. Dongare, Appl. Catal. A, 285, 190 (2005).
R. Shafi and G. J. Hutchings, Catal. Today, 59, 423 (2000).
Y. Liu, C. Liu and G. Que, Energy Fuels, 16, 531 (2002).
B. Dhandapani, T. St. Clair and S. T. Oyama, Appl. Catal. A, 168, 219 (1998).
A. Montesinos-Castellanos, T. A. Zepeda, B. Pawelec, E. Lima, J. L. G. Fierro, A. Olivas and J.A. de los Reyes H, Appl. Catal. A, 334, 330 (2008).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gong, S., Liu, L., He, H. et al. Dibenzothiophene hydrodesulfurization over MoP/SiO2 catalyst prepared with sol-gel method. Korean J. Chem. Eng. 27, 1419–1422 (2010). https://doi.org/10.1007/s11814-010-0234-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-010-0234-3