Abstract
The sensitivity of the low- and high-speed spinning processes incorporated with flow-induced crystallization has been investigated using frequency response method, based on process conditions employed in Lee et al. [1] and Shin et al. [2,3]. Crystallinity occurring in the spinline makes the spinning system less sensitive to any disturbances when it has not reached its maximum onto the spinline in comparison with the spinning case without crystallization. Whereas, the maximum crystallinity increases the system sensitivity to disturbances, interestingly exhibiting high amplitude value of the spinline area at the take-up in low frequency regime. It also turns out that neck-like deformation in the spinline under the high-speed spinning conditions plays a key role in determining the sensitivity of the spinning system.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
J. S. Lee, D.M. Shin, H.W. Jung and J.C. Hyun, J. Non-Newtonian Fluid Mech., 130, 110 (2005).
D. M. Shin, J. S. Lee, H.W. Jung and J. C. Hyun, Kor. Aust. Rheol. J., 17, 63 (2005).
D. M. Shin, J. S. Lee, H.W. Jung and J. C. Hyun, Rheol. Acta, 45,575 (2006).
D. Gelder, Ind. Eng. Chem. Fundam., 10, 534 (1971).
R. J. Fisher and M.M. Denn, AIChE J., 22, 236 (1976).
M.M. Denn, Modeling for Process Control in Advances in Control and Dynamic Systems, XV, C. T. Leondes, Ed., Academic Press (1979).
S. Kase and M. Araki, J. Appl. Polym. Sci., 27, 4439 (1982).
B. M. Devereux and M. M. Denn, Ind. Eng. Chem. Fundam., 33,2384 (1994).
W.W. Schultz, A. Zebib, S.H. Davis and Y. Lee, J. Fluid Mech., 149, 455 (1984).
A.K. Doufas and A. J. McHugh, J. Non-Newtonian Fluid Mech., 92, 81 (2000).
A.K. Doufas, A. J. McHugh and C. Miller, J. Non-Newtonian Fluid Mech., 92, 27 (2000).
Y. L. Joo, J. Sun, M.D. Smith, R. C. Armstrong, R.A. Brown and R. A. Ross, J. Non-Newtonian Fluid Mech., 102, 37 (2002).
H.W. Jung, H.-S. Song and J.C. Hyun, J. Non-Newtonian Fluid Mech., 87(2–3), 165 (1999).
H.W. Jung and J.C. Hyun, Korean J. Chem. Eng., 16(3), 325 (1999).
H.W. Jung, H.-S. Song and J. C. Hyun, AIChE J., 46, 2106 (2000).
J. S. Lee, H.W. Jung, S.H. Kim and J. C. Hyun, J. Non-Newtonian Fluid Mech., 99, 159 (2001).
H.W. Jung, J. S. Lee and J. C. Hyun, Kor. Aust. Rheol. J., 14, 57 (2002).
H.W. Jung, J. S. Lee, L. E. Scriven and J. C. Hyun, Korean J. Chem. Eng., 21, 20 (2004).
J. S. Lee, D. M. Shin, H.W. Jung, J. C. Hyun and Y.U. Jeong, J. Soc. Rheol. Japan, 33, 2125 (2005).
J.H. Yun, D.M. Shin, J. S. Lee, H.W. Jung and J. C. Hyun, J. Soc. Rheol. Japan, 36, 133 (2008).
W.H. Kohler and A. J. McHugh, Chem. Eng. Sci., 62, 2690 (2007).
W.H. Kohler and A. J. McHugh, Polym. Eng. Sci., 48, 88 (2008).
A. Ziabicki, Fundamentals of fiber formation, John Wiley and Sons (1976).
A. Ziabicki and H. Kawai, High-speed fiber spinning: Science and engineering aspect, John Wiley and Sons (1985).
N. Phan-Thien and R. I. Tanner, J. Non-Newtonian Fluid Mech., 2,353 (1977).
I. A. Muslet and M.R. Kamal, J. Rheol., 48, 525 (2004).
R. Kolb, S. Seifert, N. Stribeck and H.G. Zachmann, Polymer, 41, 1497 (2000).
H. Haberkorn, K. Hahn, H. Breuer, H.D. Dorrer and P. Matthies, J. Appl. Polym. Sci., 47, 1555 (1993).
W. Takarada, K. Kazama, H. Ito and T. Kikutani, Intern. Polym. Proc., 19, 380 (2004).
J.C. Friedly, Dynamic behavior of processes, Prentice-Hall, New Jersey (1972).
W. Minoshima, J. L. White and J. E. Spruiell, Polym. Eng. Sci., 20, 1166 (1980).
R. Zheng and P. K. Kennedy, J. Rheol., 48, 823 (2004).
Author information
Authors and Affiliations
Corresponding author
Additional information
This paper is dedicated to Professor Jae Chun Hyun for celebrating his retirement from Department of Chemical and Biological Engineering of Korea University.
Rights and permissions
About this article
Cite this article
Yun, J.H., Shin, D.M., Lee, J.S. et al. Sensitivity of spinning process with flow-induced crystallization kinetics using frequency response method. Korean J. Chem. Eng. 27, 37–44 (2010). https://doi.org/10.1007/s11814-010-0102-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-010-0102-1