Abstract
Excess molar enthalpy (HE) data at 298.15 K are reported for the binary systems di-isopropyl ether (1)+ethanol (2), di-isopropyl ether (1)+isooctane (2), ethanol (1)+isooctane (2), di-butyl ether (1)+ethanol (2), di-butyl ether (1)+isooctane (2), propyl vinyl ether (1)+ethanol (2) and propyl vinyl ether (1)+isooctane (2). These data were obtained by using an isothermal flow calorimeter. The experimental binary HE data were well correlated with the Redlich-Kister model, and infinitely dilute partial excess molar enthalpies for each binary were calculated with the fitted Redlich-Kister parameters. Additionally, the isoclines of HE for ternary systems di-isopropyl ether (1)+ethanol (2)+isooctane (3), di-butyl ether (1)+ethanol (2)+isooctane (3) and propyl vinyl ether (1)+ethanol (2)+isooctane (3) at 298.15 K were calculated by using the Radojkovič equation. HE for all the measured systems in this work shows that mixing is endothermic.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
G. C. Pedrosa, J. A. Salas and M. Katz, Thermochim. Acta, 160, 242 (1990).
S. J. Park and T. J. Lee, Korean J. Chem. Eng., 12, 110 (1995).
S. J. Park, K. J. Han and J. Gmehling, Fluid Phase Equilib., 200, 399 (2002).
J. H. Oh and S. J. Park, J. Chem. Eng. Data, 43, 1000 (1998).
K. Fischer, S. J. Park and J. Gmehling, J. Phys.-Chem. Data, 2, 135 (1996).
K. J. Han, S. J. Park and J. Gmehling, J. Chem. Eng. Data, 52, 230 (2007).
K. J. Han, I. C. Hwang, S. J. Park and I. H. Park, J. Chem. Eng. Data, 52, 1018 (2007).
I. C. Hwang, K. J. Han and S. J. Park, J. Chem. Eng. Data, 52, 1118 (2007).
Dortmund Data Bank Software Package (DDBSP), version 2006 professional. (http://www.ddbst.de)
Isothermal Microcalorimeter Use’s Manual Revision 3.0, Calorimetry Sciences Corp (1997).
Y. W. Kim and M. G. Kim, Korean Chem. Eng. Res., 42, 426 (2004).
D. Y. Peng, G. C. Benson and B. C.-Y. Lu, J. Chem. Thermodynamics, 34, 413 (2002).
L. Wang, G. C. Benson and B. C.-Y. Lu, J. Chem. Thermodyn., 24, 1305 (1992).
O. Redlich and A. T. Kister, Ind. Eng. Chem., 40, 345 (1948).
N. Radojkovi, A. Tasi, B. Grozdani and M. Mali, J. Chem. Thermodyn., 9, 349 (1977).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, MG., Park, SJ. & Hwang, IC. Excess molar enthalpies for the binary and ternary mixtures of ether compounds (di-isopropyl ether, di-butyl ether, propyl vinyl ether) with ethanol and isooctane at 298.15 K. Korean J. Chem. Eng. 25, 1160–1164 (2008). https://doi.org/10.1007/s11814-008-0191-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11814-008-0191-2