Abstract
The Makran accretionary wedge has the smallest subduction angle among any accretionary prism in the world. The factors controlling the spacing and morphological development of its deep thrust faults, as well as the formation mechanism of shallow normal faults, remain unclear. Meanwhile, the factors affecting the continuity of plane faults must be comprehensively discussed. Clarifying the development characteristics and deformation mechanisms of the Makran accretionary wedge is crucial to effectively guide the exploration of gas hydrate deposits in the area. This study aims to interpret seismic data to identify typical structures in the Makran accretionary wedge, including deep imbricate thrust faults, shallow and small normal faults, wedge-shaped piggyback basins, mud diapirs with fuzzy and disorderly characteristics of reflection, décollements with a northward tilt of 1°–2°, and large seamounts. Physical simulation-based experiments are performed to comprehensively analyze the results of the plane, section, and slices of the wedge. Results reveal that the distances between and shapes of thrust faults in the deep parts of the Makran accretionary wedge are controlled by the bottom décollement. The uplift of the thrust fault-related folds and the upwelling of the mud diapirs primarily contribute to the formation of small normal faults in the shallow part of the area. The mud diapirs originate from plastic material at the bottom, while those that have developed in the area near the trench are larger. Seamounts and mud diapirs break the continuity of fault plane distribution.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Arthurton, R. S., Farah, A., and Ahmed, W., 1982. The late Cretaceous-Cenozoic history of western Baluchistan Pakistan–The northern margin of the Makran subduction complex. Geological Society London Special Publications, 10(1): 373–385, DOI: https://doi.org/10.1144/GSL.SP.1982.010.01.25.
Burg, J. P., 2018. Geology of the onshore Makran accretionary wedge: Synthesis and tectonic interpretation. Earth-Science Reviews, 185: 1210–1231, DOI: https://doi.org/10.1016/j.earscirev.2018.09.011.
Byrne, D. E., Sykes, L. R., and Davis, D. M., 1992. Great thrust earthquakes and a seismic slip along the plate boundary of Makran subduction zone. Journal of Geophysical Research, 97(B1): 449–478, DOI: https://doi.org/10.1029/91JB02165.
Cotton, J. T., and Koyi, H. A., 2000. Modeling of thrust fronts above ductile and frictional detachments: Application to structures in the salt range and Potwar Plateau, Pakistan. Geological Society of America Bulletin, 112(3): 351–363, DOI: https://doi.org/10.1130/0016-7606(2000)1122.3.CO;2.
Cromie, C., Scarselli, N., Craig, J., Khan, M. R., and Hussain, A., 2022. Tectonostratigraphic evolution and hydrocarbon prospectivity south of Gwadar Bay, Makran accretionary wedge, offshore SW Pakistan. Journal of Petroleum Geology, 45(2): 179–200, DOI: https://doi.org/10.1111/jpg.12812.
DeMets, C., Gordon, R. G., Argus, D. F., and Stein, S., 1990. Current plate motions. Geophysical Journal International, 101: 425–478, DOI: https://doi.org/10.1111/j.1365-246X.1990.tb06579.x.
Ding, F., Spiess, V., Fekete, N., Murton, B., Brüning, M., and Bohrmann, G., 2010. Interaction between accretionary thrust faulting and slope sedimentation at the frontal Makran accretionary prism and its implications for hydrocarbon fluid seepage. Journal of Geophysical Research, 115: B08106, DOI: https://doi.org/10.1029/2008JB006246.
Fruehn, J., White, R. S., and Minshull, T. A., 1997. Internal deformation and compaction of the Makran accretionary wedge. Terra Nova, 9(3): 101–104, DOI: https://doi.org/10.1046/j.1365-3121.1997.d01-13.x.
Gaedicke, C., Prexl, A., Schluter, H. U., Meyer, H., Roeser, H., and Clift, P., 2002. Seismic stratigraphy and correlation of major regional unconformities in the northern Arabian Sea. Geological Society, London, Special Publications, 195(1): 5–36, DOI: https://doi.org/10.1144/GSL.SP.2002.195.01.03.
Gong, J. M., Liao, J., Sun, J., Yang, C. S., Wang, J. Q., He, Y. J., et al., 2016. Factors controlling gas hydrate accumulation in Makran accretionary wedge of Pakistan. Marine Geology Frontiers, 32(12): 10–15, DOI: https://doi.org/10.16028/j.1009-2722.2016.12002.
Gong, J. M., Liao, J., Yin, W. H., Zhang, L., He, Y. J., Sun, Z. L., et al., 2018a. Gas hydrate accumulation models of Makran accretionary wedge, northern Indian Ocean. Marine Geology and Quaternary Geology, 38(2): 148–155, DOI: https://doi.org/10.16562/j.cnki.0256-1492.2018.02.015 (in Chinese with English abstract).
Gong, J. M., Liao, J., Zhang, L., He, Y. J., Zhai, B., Meng, M., et al., 2018b. Discussion on the distribution and main controlling factors of mud volcanoes in Makran accretionary wedge, northern Indian Ocean. Geoscience, 32(5): 1025–1030, DOI: https://doi.org/10.19657/j.geoscience.1000-8527.2018.05.15.
Grando, G., and Mcclay, K., 2007. Morphotectonics domains and structural styles in the Makran accretionary prism, offshore Iran. Sedimentary Geology, 196(1–4): 157–179, DOI: https://doi.org/10.1016/j.sedgeo.2006.05.030.
Grevemeyer, I., Rosenberger, A., and Villinger, H., 2000. Natural gas hydrates on the continental slope off Pakistan: Constraints from seismic techniques. Geophysical Journal International, 140(2): 295–310, DOI: https://doi.org/10.1046/J.1365-246X.2000.00009.X.
Harms, J. C., Cappel, H. N., and Francis, D. C., 1984. The Makran coast of Pakistan: Its stratigraphy and hydrocarbon potential. In: Marine Geology and Oceanography of Arabian Sea and Coastal Pakistan. Haq, B. U., and Milliman, J. D., eds., Van Nostrand Reinhold Company Inc., New York, 3–26.
Jia, H. Y., Tan, M. Y., Han, B., and Tang, M. J., 2013. Physical simulation of brush structure in Linbei area, Huimin sag, Bohai Bay Basin. Petroleum Geology and Experiment, 35(1): 92–97, DOI: https://doi.org/10.11781/sysydz20130116.
Kopp, C., Fruehn, J., Flueh, E. R., Reichert, C., Kukowski, N., Bialas, J., et al., 2000. Structure of the Makran subduction zone from wide-angle and reflection seismic data. Tectonophysics, 329(1–4): 171–191, DOI: https://doi.org/10.1016/S0040-1951(00)00195-5.
Koyi, H., Jenyon, M. K., and Petersen, K., 1993. The effect of basement faulting on diapirism. Journal of Petroleum Geology, 16(3): 285–312, DOI: https://doi.org/10.1306/BF9AB725-0EB6-11D7-8643000102C1865D.
Kukowski, N., Schillhorn, T., Huhn, K., Rad, U. V., Husen, S., and Flueh, E. R., 2001. Morphotectonics and mechanics of the central Makran accretionary wedge off Pakistan. Marine Geology, 173(1–4): 1–19, DOI: https://doi.org/10.1016/S0025-3227(00)00167-5.
Li, F. C., Sun, Z., and Zhang, J. Y., 2016. Deformation of sea-mount during subduction: Insights from sandbox experiment and numerical simulation. Journal of Tropical Oceanography, 35(14): 31–37, DOI: https://doi.org/10.11978/2015002.
Li, F. C., Sun, Z., Zhang, Y. F., Xu, Z. Y., and Xie, H., 2012. Influence of oblique seamount subduction on the deformation of upper plate. Progress in Geophysics, 27(4): 1406–1415, DOI: https://doi.org/10.6038/j.issn.1004-2903.2012.04.015 (in Chinese with English abstract).
Liao, J., Gong, J. M., He, Y. J., Yu, B. J., and Meng, M., 2019. Sequence and development process of Makran accretionary wedge. Marine Geological Front, 35(4): 69–72, DOI: https://doi.org/10.16028/j.1009-2722.2019.04008.
Liao, J., Liu, X. X., Zhao, Q. F., Gong, J. M., Yin, W. H., Li, S., et al., 2022. Characteristics of high saturation hydrate reservoirs in the low-angle subduction area of the Makran accretionary prism. Frontiers in Earth Science, 10: 1–10, DOI: https://doi.org/10.3389/feart.2022.861162.
McCall, G. J. H., 2002. A summary of the geology of the Iranian Makran. Geological Society, 195(1): 147–204, DOI: https://doi.org/10.1144/gsl.sp.2002.195.01.10.
Meng, M., Gong, J. M., and Liao, J., 2020. Difference in gas sources for offshore and onshore mud volcanoes in Makran accretionary wedge. Marine Geology Frontiers, 36(5): 43–48, DOI: https://doi.org/10.16028/j.1009-2722.2019.157.
Meng, M., Gong, J. M., Liao, J., Pan, J., and He, Y. J., 2019. The study of reservoir model promotes the new discovery of natural gas hydrate investigation. Marine Geology Frontiers, 35(11): 74–76, DOI: https://doi.org/10.16028/j.1009-2722.2019.11011.
Minshull, T., and White, R., 1989. Sediment compaction and fluid migration in the Makran accretionary prism. Journal of Geophysical Research, 94(B6): 7387–7402, DOI: https://doi.org/10.1029/jb094ib06p07387.
Pajang, S., Cubas, N., Letouzey, J., Pourhiet, L. L., Seyedali, S., Fournier, M., et al., 2021. Seismic hazard of the western Makran subduction zone: Insight from mechanical modelling and inferred frictional properties. Earth and Planetary Science Letters, 562: 116789, DOI: https://doi.org/10.1016/j.epsl.2021.116789.
Platt, J. P., Leggett, J. K., Young, J., Raza, H., and Alam, S., 1985. Large-scale sediment underplating in the Makran accretionary prism, Southwest Pakistan. Geology, 13: 507–511, DOI: https://doi.org/10.1130/0091-7613(1985)132.0.CO;2.
Qian, X., Zhang, L., Wu, S. G., Sun, Z. Y., Lei, Z. Y., and Luo, S. B., 2022. Seismic characteristics and hydrocarbon accumulation associated with mud diapir structures in a superimposed basin in the southern South China Sea margin. Journal of Ocean University of China, 21(4): 861–875, DOI: https://doi.org/10.1007/s11802-022-5098-8.
Rad, U. V., Berner, U., Delisle, G., Doose-Rolinski, H., Fechner, N., Linke, P., et al., 2000. Gas and fluid venting at the Makran accretionary wedge off Pakistan. Geo-Marine Letters, 20(1): 10–19, DOI: https://doi.org/10.1007/s003670000033.
Schlüter, H. U., Prexl, A., Gaedicke, C., Roeser, H., and Daniels, C. V., 2002. The Makran accretionary wedge: Sediment thicknesses and ages and the origin of mud volcanoes. Marine Geology, 185(3): 219–232, DOI: https://doi.org/10.1016/S0025-3227(02)00192-5.
Smith, G. L., Mcneill, L. C., Henstock, T. J., Arraiz, D., and Spiess, V., 2014. Fluid generation and distribution in the highest sediment input accretionary margin, the Makran. Earth and Planetary Science Letters, 403: 131–143, DOI: https://doi.org/10.1016/j.epsl.2014.06.030.
Smith, G., McNeill, L., Henstock, T. J., and Bull, J., 2012. The structure and fault activity of the Makran accretionary prism. Journal of Geophysical Research: Solid Earth, 117(B7): B07 407, DOI: https://doi.org/10.1029/2012JB009312.
Weijermars, R., Jackson, M. P. A., and Vendeville, B., 1993. Rheological and tectonic modeling of salt provinces. Tectonophysics, 217(1/2): 143–174, DOI: https://doi.org/10.1016/0040-1951(93)90208-2.
White, R. S., and Klitgord, K., 1976. Sediment deformation and plate tectonics in the Gulf of Oman. Earth and Planetary Science Letters, 32(2): 199–209, DOI: https://doi.org/10.1016/0012-821X(76)90059-5.
Yu, F. S., Li, D. H., Zhao, Y. J., and Dong, C. H., 2012. Physical simulation of double decollements: Insight into the fold-and-thrust belt in the southern font of Junggar Basin. Journal of Earth Sciences and Environment, 34(2): 15–23 (in Chinese with English abstract).
Yu, F. S., Wang, X. D., Qiu, X. W., Wang, D. D., Li, C., Lü, X. Y., et al., 2019. Characteristics of fault structure and the genesis of herringbone structure in Lufeng sag, Pearl River Mouth Basin. Acta Petrolei Sinica, 40(S1): 166–177, DOI: https://doi.org/10.7623/syxb2019S10140 (in Chinese with English abstract).
Yu, F. S., Zhang, R. F., Yu, J. F., Wang, Y. D., Chen, S. G., Liu, J., et al., 2021. Meso-Cenozoic negative inversion model for the Linhe depression of Hetao Basin, China. Geological Magazine, 159: 535–560, DOI: https://doi.org/10.1017/S0016756821001138.
Acknowledgements
This study was funded by the National Natural Science Foundation of China (No. 42076069). The constructive and detailed comments of two anonymous reviewers improved both the content and presentation of this article.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shao, L., Yu, F., Gong, J. et al. Genetic Analysis of Structural Styles in the Makran Accretionary Wedge–Insight from Physical Simulations. J. Ocean Univ. China 23, 157–172 (2024). https://doi.org/10.1007/s11802-024-5576-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11802-024-5576-2