Abstract
Light emitting diode (LED) light source degradation detection and lifetime evaluation usually use the data of light flux change as a basis, but the process of light flux measurement is complicated and tedious, requiring the use of an integrating sphere, and cannot be performed online. This is unfriendly to the detection of machine vision light sources used in production lines. To address this problem, this paper proposes and designs a method for online detection and lifetime evaluation of light sources by using a mini spectrometer to detect the intensity of light sources online, and evaluates the light degradation and lifetime of light sources based on the changes in light intensity during use. This determines whether the light source needs to be adjusted or replaced, avoiding misjudgment or missed judgment in production detection due to light source degradation. The experiment was conducted on LED under high-temperature accelerated aging. The light intensity data after aging was fitted by an acceleration and life evaluation model, and the fitting result showed that the error of life evaluation by this method was 8.37%. As a comparison, this paper also detects the changes in light flux of light sources during the experiment, and the average error between the decay of light intensity and the decay of light flux was only 0.102%. It has been validated that the error in evaluating the lifetime of light sources using this method is 10.71%, and the accuracy of the evaluation is about 90%. The results show that the method is accurate, reliable, and can be used as a basis for online detection and evaluation of LED light source degradation.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
ZHU B W. Lighting design in machine vision[J]. Electronic science and technology, 2013, 26(03): 80–82. (in Chinese)
PIMPUTKAR S, SPECK J S, DENBAARS S P, et al. Prospects for LED lighting[J]. Nature photonics, 2009, 3(4): 180–182.
SUN B, FAN X J, VAN D W, et al. Lumen decay prediction in LED lamps[C]//2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). New York: IEEE, 2016: 1–5.
NARENDRAN N, GU Y, FREYSSINIER J P, et al. Solid-state lighting: failure analysis of white LEDs[J]. Journal of crystal growth, 2004, 3/4: 268.
CHEN Z Z, ZHAO J, QIN Z X. Study on the stability of the high brightness white LED[J]. Physica status solidi (b), 2004, 241: 2664–2667.
LI H J, NEI L, HUANG F. Lifetime modeling of LED luminaires by dual-stress accelerated life test[C]//3rd International Conference on Material, Mechanical and Manufacturing Engineering (IC3ME 2015), June 27–28, 2015, Guangzhou, China.
ZHANG H. Reliability and lifetime prediction of LED drivers[C]//2017 14th China International Forum on Solid State Lighting: International Forum on Wide Bandgap Semiconductors China, November 1–3, 2017, Beijing, China. CHINASSL, 2017.
YANG L H, WANG W J, CHEN P C, et al. Study and application of online detection system for LED lamps[J]. China illuminating engineering journal, 2017, 28(02): 110–113.
ZHANG H. A viable nontesting method to predict the lifetime of LED drivers[J]. IEEE journal of emerging and selected topics in power electronics, 2018, 6(3): 1246–1251.
LIU H W, YU D D, NIU P J, et al. Lifetime prediction of a multi-chip high-power LED light source based on artificial neural networks - ScienceDirect[J]. Results in physics, 2019, 12: 361–367.
PADMASALI A N, KINI S G. A lifetime performance analysis of LED luminaires under real-operation profiles[J]. IEEE transactions on electron devices, 2019, PP(99): 1–8.
HAO J, KE H L, JING L, et al. Prediction of lifetime by lumen degradation and color shift for LED lamps, in a non-accelerated reliability test over 20,000h[J]. Applied optics, 2019, 58(7): 1855–1861.
THOTAGAMUWA D R, NARENDRAN N, LIU Y W, et al. A theoretical model for predicting LED product lifetime based on solder joint failure[C]//Light-Emitting Devices, Materials, and Applications, February 4, 2019, San Francisco, USA. Washington: SPIE, 2019.
QIAN M H, LIN Y D, SUN Y J. Life prediction model for LEDs based on the photo-electro-thermal-life theory[J]. Acta optica sinica, 2012, 32(08): 185–190.
QU X H, WANG H, ZHAN X Q, et al. A lifetime prediction method for LEDs considering real mission profiles[J]. IEEE transactions on power electronics, 2016, 32(11): 8718–8727.
TREVIANELLO L, MENEGHINI M, MURA G, et al. Accelerated life test of high brightness light emitting diodes[J]. IEEE transactions on device and materials reliability, 2008, 8(2): 304–311.
HUANG J L, GOLUBOVIC D S, KOH S, et al. Degradation mechanisms of mid-power white-light LEDs under high-temperature-humidity conditions[J]. IEEE transactions on device and materials reliability, 2015, 15(2): 220–228.
ZHANG G L, CAI J Y, LIANG Y Y, et al. Research on reliability assessment method of electronic equipment based on multi-stress ADT[J]. Acta aeronautica ET astronautica sinica, 2013, 34(12): 2815–2822.
LIU X J, WEN Y, ZHU S L. Definition and test method of service life of white LED[J]. Lamps & lighting, 2001, (04): 16–22.
KECECIOGLU D, JACKS J A. The Arrhenius, Eyring, inverse power law and combination models in accelerated life testing[J]. Reliability engineering, 1984, 8(1): 1–9.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
The authors declare no conflict of interest.
Rights and permissions
About this article
Cite this article
Yu, K., Chen, H., Zhu, Z. et al. A method for online detection and lifespan evaluation of light sources. Optoelectron. Lett. 19, 693–697 (2023). https://doi.org/10.1007/s11801-023-3022-0
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11801-023-3022-0