Abstract
In this paper, the silver nanoparticle ink and ink-jet printing technology are used to manufacture the surface acoustic wave (SAW) filters. The characteristics of three common substrate piezoelectric materials of ST-quartz, Y36°-LiTaO3 and Y128°-LiNbO3 are evaluated. The experimental results show that Y128°-LiNbO3 matches the ink much better than others. The printed SAW filter with Y128°-LiNbO3 as piezoelectric substrate is realized, and its center frequency and bandwidth are 18.4 MHz and 500 kHz, respectively.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
S. K. Park, Y. H. Kim, J. I. Han, D. G. Moon and W. K. Kim, IEEE Transactions on Electron Devices 49, 2008 (2002).
H. Sirringhaus, T. Kawase, R. H. Friend, T. Shimoda, M. Inbasekaran, W. Wu and E. P. Woo, Science 290, 2123 (2000).
J. J. Schneider, R. C. Hoffmann, J. Engstler, O. Soffke, W. Jaegermann, A. Issanin and A. Klyszcz, Advanced Materials 20, 3383 (2008).
Y. Y. Noh, X. Y. Cheng, H. Sirringhaus, J. I. Sohn, M. E. Welland and D. J. Kang, Applied Physics Letters 91, 043109 (2007).
J. Vaillancourt, H. Y. Zhang, P. Vasinajindakaw, H. T. Xia, X. J. Lu, X. L. Han, D. C. Janzen, W. S. Shih, C. S. Jones, M. Stroder, M. Y. Chen, H. Subbaraman, R. T. Chen, U. Berger and M. Renn, Applied Physics Letters 93, 243301 (2008).
M. Harting, J. Zhang, D. R. Gamota and D. T. Britton, Applied Physics Letters 94, 193509 (2009).
P. A. Ersman, D. Nilsson, J. Kawahara, G. Gustafsson and M. Berggren, Organic Electronics 14, 1276 (2013).
K. J. Baeg, D. Khim, J. Kim, D. Y. Kim, S. W. Sung, B. D. Yang and Y. Y. Noh, IEEE Electron Device Letters 34, 126 (2013).
J. Kawahara, P. A. Ersman, D. Nilsson, K. Katoh, Y. Nakata, M. Sandberg, M. Nilsson, G. Gustafsson and M. Berggren, Journal of Polymer Science Part B: Polymer Physics 51, 265 (2013).
P. A. Ersman, J. Kawahara and M. Berggren, Organic Electronics 14, 3371 (2013).
H. A. Andersson, A. Manuilskiy, S. Haller, M. Hummelgard, J. Siden, C. Hummelgard, H. Olin and H. E. Nilsson, Nanotechnology 25, 4002 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
This work has been supported by the Project of the Science & Technology Pillar Program of Tianjin (No.12ZCZDJC35500), and the Natural Science Foundation of Tianjin (No.13JCQNJC01300).
Rights and permissions
About this article
Cite this article
Liu, Xc., Li, K., Xuan, Xw. et al. SAW filter manufacture and piezoelectric materials evaluation based on printed electronics technology. Optoelectron. Lett. 10, 340–342 (2014). https://doi.org/10.1007/s11801-014-4117-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11801-014-4117-4