Abstract
We have fabricated an organic photocoupler with organic light-emitting diodes (OLEDs) with 520 nm emissive wavelength as the input light source and a photodiode (PD) based on poly(3-hexylthiophene) (P3HT):1-(3-methoxycarbonyl)propyl-1-phenyl-(6,6)-C61 (PCBM) as the detector. The influences of buffer layer (PEDOT:PSS) on output current (I out), current transfer ratio (CTR) and time response characteristics of the photocoupler device were studied. Through our experiments, It is found that the output current linearly increases with the input current, the max output current and CTR of the devices with PEDOT:PSS buffer layer are 2 times and 7 times than that of the devices without buffer layer respectively, which show that the existence of buffer layer can enhance the output photocurrent efficiently. Moreover, the existence of PEDOT:PSS eliminates the time delay of the devices.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. J. Heeger, Angew. Semiconducting and Metallic Polymers: Chem. Int. Ed, 40 (2001), 2591.
F. Padinger, R. S. Rittberger, and N. S. Sariciftci, Adv. Funct. Mater., 13 (2003), 85.
Holger Spanggaard, and Frederik C. Krebs, Sol. Energy Mater. Sol. Cells, 83 (2004), 125.
S.E. Shaheen, D.S. Ginley, G.E. Jabbour (Eds.), Special Issue: Organic-based Photovoltaics, MRS Bull, 2005.
C. W. Tang and S.A Vanslyke, Appl. Phys. Lett. 51 (1987), 9135.
G. F. Dong, Y. Hu, and C. G. Jiang, Appl. Phys. Lett., 88 (2006), 051.
GAO Zhi-xiang, HAO Yu-ying, and MA Chen, Journal of Optoelectronics · Laser, 19 (2008), 152.(in Chinese)
Y. Wang, Y. L. Hua, and X. M. Wu, Organic Electronics, 9 (2008), 692.
Jin Young Kim, Kwanghee Lee, and Nelson E. Coates, Science. 317 (2007), 222.
U. Tietze, C. Schenk, and E. Schmid. Electronic Circuits: Design and Application, Springer, Berlin, 1991, 99.
S. Gage, D. Evans, M. Hodapp, Electronic Circuits: Design and Application, McGraw-Hill, New York, 1977.
Y. Yao, Hsiang-Yu Chen, and J. S. Huang, Appl. Phys. Lett. 90 (2007), 053509.
Y. Wang, Y. L. Hua, and X.M. Wu, Appl. Phys. Lett., 92 (2008), 123.
Y. Wang, Y. L. Hua, and X. M. Wu, Organic Electronics., 9 (2008), 273.
Y. Wang, Y. L. Hua, and X. M. Wu, Appl. Phys. Lett., 93 (2008), 113.
P. Parkinson, J. Lloyd-Hughes, and M. B. Johnston, Phys. Rev. B, 78 (2008), 115321.
Paul D. Cunningham and L. Michael Hayden, J. Phys. Chem. C, 112 (2008), 7928.
G. Yu, J. Gao, J. C. Hummelen, and F. Wudl, Science, 270 (1995), 1789.
Matthew T. Lloyd, Yee-Fun Lim, and George G. Malliaras, Appl. Phys. Lett., 92 (2008), 143308.
Tobat P.I. Saragi, Robert Pudzich, and Thomas Fuhrmann-Lieker, Optical Materials, 29 (2007), 879.
Florent Monestier, Jean-Jacques Simon, Philippe Torchio, Solar Energy Materials & Solar Cells., 91 (2007), 405.
Saghar Khodabakhsh, Brett M. Sanderson, and Jenny Nelson, Adv. Funct. Mater., 16 (2006), 95.
K. Vandewal, L. Goris, I. Haeldermans, Thin Solid Films, 516 (2008), 7135.
Author information
Authors and Affiliations
Corresponding author
Additional information
This work has been supported by the National Natural Science Foundation of China (60676051, 60876046), Tianjin Natural Science Foundation (06TXTJJC14603, 07JCYBJC12700) and the Tianjin Key Discipline of Material Physics and Chemistry.
Rights and permissions
About this article
Cite this article
Wang, Zq., Wu, Xm., Jing, N. et al. Influence of PEDOT:PSS buffer layer on the performance of organic photocoupler. Optoelectron. Lett. 5, 173–176 (2009). https://doi.org/10.1007/s11801-009-9031-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11801-009-9031-9