Abstract
The effect of fin attachment on the thermal stress reduction of exhaust manifold of an off road diesel engine (Komatsu HD325-6) was investigated. For doing this, coupled thermo-fluid-solid analysis of exhaust manifold of the off road diesel engine was carried out. The thermal analysis, including thermal flow, thermal stress, and the thermal deformation of the manifold was investigated. The flow inside the manifold was simulated and then its properties including velocity, pressure, and temperature were obtained. The flow properties were transferred to the solid model and then the thermal stresses and the thermal deformations of the manifold under different operating conditions were calculated. Finally, based on the predicted thermal stresses and thermal deformations of the manifold body shell, two fin types as well as body shell thickness increase were applied in the critical induced thermal stress area of the manifold to reduce the thermal stress and thermal deformation. The results of the above modifications show that the combined modifications, i.e. the thickness increase and the fin attachment, decrease the thermal stresses by up to 28% and the contribution of the fin attachment in this reduction is much higher compared to the shell thickness increase.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
KANDYLAS I P, STAMATELOS A M. Engine exhaust system design based on heat transfer computation [J]. Energy Conversion & Management, 1999, 40: 1057–1072.
LONDHE A. Thermo-structural strength analysis for failure prediction and concern resolution of an exhaust manifold [R]. Automotive Sector Nasik, India, 2003: 3580–3588.
YASAR D, BURKHARD S, JIMENEZ L P. CFD-FE-analysis for the exhaust manifold of a diesel engine [J]. International Journal of Mechanical Sciences, 2004, 47: 303–317.
ZHANG X. Coupled thermo-fluid-solid analysis of engine exhaust manifold considering welding residual stresses [J]. Transactions of JWRI, Special Issue on WSE, 2011: 75–77.
MAOQINA Z. Development for stainless steel exhaust manifold and CAE analysis [J]. Advance Material Research, 2012, 164(4): 123–128.
RATHNARA J D. Thermomechanical fatigue analysis of stainless steel exhaust manifolds [J]. IRACST–Engineering Science and Technology, An International Journal (ESTIJ), 2012, 2(2): 265–267
SATISH S. Comparison of predictions obtained on an exhaust manifold analysis [C]// International Congress on Computational Mechanics and Simulation (ICCMS). IIT Hyderabad, 2012.
LIU Z E. Numerical simulation for exhaust manifold based on the serial coupling of STAR-CCM+ and ABAQUS [J]. Research Journal of Applied Sciences, Engineering and Technology, 2013, 6(20): 3903–3912.
JAIN S, AGRAWAL A. Coupled thermal–structural finite element analysis for exhaust manifold of an off-road vehicle diesel engine [J]. International Journal of Soft Computing and Engineering (IJSCE), 2013, 3: 226–223.
ZOU B. The impact of temperature effect on exhaust manifold thermal modal analysis [J]. Research Journal of Applied Sciences, Engineering and Technology, 2013, 6(15): 2824–2829.
LUJÁN J M, CLIMENT H, OLMEDA P. Heat transfer modeling in exhaust systems of high-performance two-stroke engines [J]. Applied Thermal Engineering, 2014, 69(1, 2): 96–104.
DONG F, HUANG D, JUMA A, SCHREIBER C M, WANG X L, ZHOU C Q. Numerical simulation of thermal stress for a liquid-cooled exhaust [C]// Proceedings of IMECE2008, 2008 ASME International Mechanical Engineering Congress and Exposition. Boston, Massachusetts, USA, 2008.
UMESH K S. CFD analysis and experimental verification of effect of manifold geometry on volumetric efficiency and for multi-cylinder engine [J]. International Journal of Engineering & Science Research, 2013, 3: 342–353.
BRANDES E A, BROOK G B. Smithells metal reference book [M]. Oxford, Butterworth Heinemann, 1992.
WOLFF K, HUSER M. Computer aided development of exhaust system durability [M]. GPC, 1998.
POPE S B. Turbulent flows [M]. Cambridge, UK, Cambridge University Press, 2000.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Partoaa, A.A., Abdolzadeh, M. & Rezaeizadeh, M. Effect of fin attachment on thermal stress reduction of exhaust manifold of an off road diesel engine. J. Cent. South Univ. 24, 546–559 (2017). https://doi.org/10.1007/s11771-017-3457-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11771-017-3457-1