Abstract
Assessing the durability of concrete is of prime importance to provide an adequate service life and reduce the repairing cost of structures. Freeze-thaw is one such test that indicates the ability of concrete to last a long time without a significant loss in its performance. In this study, the freeze-thaw resistance of polymer concrete containing different polymer contents was explored and compared to various conventional cement concretes. Concretes’ fresh and hardened properties were assessed for their workability, air content, and compressive strength. The mass loss, length change, dynamic modulus of elasticity, and residual compressive strength were determined for all types of concretes subjected to freeze-thaw cycles according to ASTM C666-procedure A. Results showed that polymer concrete (PC) specimens prepared with higher dosages of polymer contents possessed better freeze-thaw durability compared to other specimens. This high durability performance of PCs is mainly due to their impermeable microstructures, absence of water in their structure, and the high bond strength between aggregates and a polymer binder. It is also indicated that the performance of high-strength concrete containing air-entraining admixture is comparable with PC having optimum polymer content in terms of residual compressive strength, dynamic modulus of elasticity, mass loss, and length change.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Toghroli A, Mehrabi P, Shariati M, Trung N T, Jahandari S, Rasekh H. Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers. Construction and Building Materials, 2020, 252: 118997
Shahrokhinasab E, Hosseinzadeh N, Monirabbasi A, Torkaman S. Performance of image-based crack detection systems in concrete structures. Journal of Soft Computing in Civil Engineering, 2020, 4(1): 127–139
Heidarnezhad F, Toufigh V, Ghaemian M. Analyzing and predicting permeability coefficient of roller-compacted concrete (RCC). Journal of Testing and Evaluation, 2021, 49(3): 1454–1473
Heidarnezhad F, Jafari K, Ozbakkaloglu T. Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete. Construction and Building Materials, 2020, 260: 119853
Abdel-Fattah H, El-Hawary M M. Flexural behavior of polymer concrete. Construction and Building Materials, 1999, 13(5): 253–262
Jung S Y, Nejatishahidein N, Kim M, Borujeni E E, Fernandez L C, Roush D J, Borhan A, Zydney A L. Quantitative interpretation of protein breakthrough curves in small-scale depth filter modules for bioprocessing. Journal of Membrane Science, 2021, 627: 119217
Jarrah M, Najafabadi E P, Khaneghahi M H, Oskouei A V. The effect of elevated temperatures on the tensile performance of GFRP and CFRP sheets. Construction and Building Materials, 2018, 190: 38–52
Jarrah M, Khezrzadeh H, Mofid M, Jafari K. Experimental and numerical evaluation of piston metallic damper (PMD). Journal of Constructional Steel Research, 2019, 154: 99–109
Gorninski J P, Dal Molin D C, Kazmierczak C S. Strength degradation of polymer concrete in acidic environments. Cement and Concrete Composites, 2007, 29(8): 637–645
Bedi R, Chandra R, Singh S P. Reviewing some properties of polymer concrete. Indian Concrete Journal, 2014, 88(8): 47–68
Jung K C, Roh I T, Chang S H. Evaluation of mechanical properties of polymer concretes for the rapid repair of runways. Composites. Part B, Engineering, 2014, 58: 352–360
Ghiasian M, Rossini M, Amendolara J, Haus B, Nolan S, Nanni A, Bel Had Ali N, Rhode-Barbarigos L. Test-driven design of an efficient and sustainable seawall structure. Coastal Structures, 2019, 2019: 1222–1227
Farhangi V, Karakouzian M. Effect of fiber reinforced polymer tubes filled with recycled materials and concrete on structural capacity of pile foundations. Applied Sciences, 2020, 10(5): 1554
Bahrololoumi A, Morovati V, Poshtan E A, Dargazany R. A multi-physics constitutive model to predict hydrolytic aging in quasi-static behaviour of thin cross-linked polymers. International Journal of Plasticity, 2020, 130: 102676
Chen D H, Lin H H, Sun R. Field performance evaluations of partial-depth repairs. Construction and Building Materials, 2011, 25(3): 1369–1378
Ghaderi A, Morovati V, Bahrololoumi A, Dargazany R. A Physics-Informed Neural Network Constitutive Model for Cross-Linked Polymers. In: ASME International Mechanical Engineering Congress and Exposition. Virtual: ASME, 2020
Fowler D W. Future trends in polymer concrete. Special Publication, 1989, 116: 129–144
Mehrabi S P, Shariati M, Kabirifar K, Jarrah M, Rasekh H, Trung N T, Shariati A, Jahandari S. Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate. Construction and Building Materials, 2021, 287: 122652
Bedi R, Chandra R, Singh S P. Mechanical properties of polymer concrete. Journal of Composites, 2013, 2013: 948745
Jafari K, Tabatabaeian M, Joshaghani A, Ozbakkaloglu T. Optimizing the mixture design of polymer concrete: An experimental investigation. Construction and Building Materials, 2018, 167: 185–196
Gupta A K, Mani P, Krishnamoorthy S. Interfacial adhesion in polyester resin concrete. International Journal of Adhesion and Adhesives, 1983, 3(3): 149–154
Reis J M L, Ferreira A J M. The effects of atmospheric exposure on the fracture properties of polymer concrete. Building and Environment, 2006, 41(3): 262–267
El-Hawary M M, Abdul-Jaleel A. Durability assessment of epoxy modified concrete. Construction and Building Materials, 2010, 24(8): 1523–1528
Ribeiro M C S, Tavares C M L, Ferreira A J M. Chemical resistance of epoxy and polyester polymer concrete to acids and salts. Journal of Polymer Engineering, 2002, 22(1): 27–44
Heidarnezhad F, Jafari K, Toufigh V, Ghaemian M. Mechanical Properties of Different Types of Concrete under Triaxial Compression Loading. In: Urbanization Challenges in Emerging Economies: Resilience and Sustainability of Infrastructure. New Delhi: ASCE, 2018
Kim M, Nejatishahidein N, Borujeni E E, Roush D J, Zydney A L, Borhan A. Flow and residence time distribution in small-scale dual-layer depth filter capsules. Journal of Membrane Science, 2021, 617: 118625
Farhangi V, Karakouzian M, Geertsema M. Effect of micropiles on clean sand liquefaction risk based on CPT and SPT. Applied Sciences, 2020, 10(9): 3111
Rebeiz K S. Precast use of polymer concrete using unsaturated polyester resin based on recycled PET waste. Construction and Building Materials, 1996, 10(3): 215–220
Bulut H A, Şahin R. A study on mechanical properties of polymer concrete containing electronic plastic waste. Composite Structures, 2017, 178: 50–62
Rossignolo J A, Agnesini M V C. Durability of polymer-modified lightweight aggregate concrete. Cement and Concrete Composites, 2004, 26(4): 375–380
Van Gemert D, Czarnecki L, Maultzsch M, Schorn H, Beeldens A, Łukowski P, Knapen E. Cement concrete and concrete-polymer composites: Two merging worlds: A report from 11th ICPIC Congress in Berlin, 2004. Cement and Concrete Composites, 2005, 27(9–10): 926–933
Beeldens A, Van Gemert D, Schorn H, Ohama Y, Czarnecki L. From microstructure to macrostructure: An integrated model of structure formation in polymer-modified concrete. Materials and Structures, 2005, 38(6): 601–607
Agavriloaie L, Oprea S, Barbuta M, Luca F. Characterisation of polymer concrete with epoxy polyurethane acryl matrix. Construction and Building Materials, 2012, 37: 190–196
Vipulanandan C, Mantrala S K. Behavior of fiber reinforced polymer concrete. In: Materials for the New Millennium. Washington, D.C.: ASCE, 1996, 1160–1169
Shokrieh M M, Heidari-Rarani M, Shakouri M, Kashizadeh E. Effects of thermal cycles on mechanical properties of an optimized polymer concrete. Construction and Building Materials, 2011, 25(8): 3540–3549
Ferdous W, Manalo A, Wong H S, Abousnina R, AlAjarmeh O S, Zhuge Y, Schubel P. Optimal design for epoxy polymer concrete based on mechanical properties and durability aspects. Construction and Building Materials, 2020, 232: 117229
Jahandari S, Saberian M, Tao Z, Mojtahedi S F, Li J, Ghasemi M, Rezvani S S, Li W. Effects of saturation degrees, freezing-thawing, and curing on geotechnical properties of lime and lime-cement concretes. Cold Regions Science and Technology, 2019, 160: 242–251
Wu J, Jing X, Wang Z. Uni-axial compressive stress-strain relation of recycled coarse aggregate concrete after freezing and thawing cycles. Construction and Building Materials, 2017, 134: 210–219
Tang S W, Yao Y, Andrade C, Li Z J. Recent durability studies on concrete structure. Cement and Concrete Research, 2015, 78: 143–154
Wu H, Liu Z, Sun B, Yin J. Experimental investigation on freeze-thaw durability of Portland cement pervious concrete (PCPC). Construction and Building Materials, 2016, 117: 63–71
Feo L, Ascione F, Penna R, Lau D, Lamberti M. An experimental investigation on freezing and thawing durability of high performance fiber reinforced concrete (HPFRC). Composite Structures, 2020, 234: 111673
Richardson A E, Coventry K A, Ward G. Freeze/thaw protection of concrete with optimum rubber crumb content. Journal of Cleaner Production, 2012, 23(1): 96–103
Richardson A, Coventry K, Edmondson V, Dias E. Crumb rubber used in concrete to provide freeze-thaw protection (optimal particle size). Journal of Cleaner Production, 2016, 112: 599–606
Khan M I, Siddique R. Utilization of silica fume in concrete: Review of durability properties. Resources, Conservation and Recycling, 2011, 57: 30–35
Mehta P K, Monteiro P J M. Concrete: Microstructure, Properties, and Materials. New York: McGraw-Hill Education, 2014
Martínez-Lage I, Martínez-Abella F, Vázquez-Herrero C, Pérez-Ordóñez J L. Properties of plain concrete made with mixed recycled coarse aggregate. Construction and Building Materials, 2012, 37: 171–176
Bogas J A, De Brito J, Ramos D. Freeze-thaw resistance of concrete produced with fine recycled concrete aggregates. Journal of Cleaner Production, 2016, 115: 294–306
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jafari, K., Heidarnezhad, F., Moammer, O. et al. Experimental investigation on freeze-thaw durability of polymer concrete. Front. Struct. Civ. Eng. 15, 1038–1046 (2021). https://doi.org/10.1007/s11709-021-0748-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-021-0748-2