Operation of thermoelectric generator (TEG) modules based on bismuth telluride alloys at temperatures higher than 250°C is mostly limited by the melting point of the assembly solder. Although the thermoelectric parameters of bismuth telluride materials degrade for temperatures >130°C, the power output of the module can be enhanced with an increase in the temperature difference. For this, a temperature-stable joining technique, especially for the hot side of the modules, is required. Fabrication and process parameters of TEG modules consisting of bismuth telluride legs, alumina ceramics and copper interconnects using a joining technique based on pressure-assisted silver powder sintering are described. Measurements of the thermal force, electrical resistance, and output power are presented that were performed for hot side module temperatures up to 350°C and temperature differences higher than 300°C. Temperature cycling and results measured during extended high-temperature operation are addressed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
M. Pehnt, J. Bödeker, M. Arens, F. Idrissova, and E. Jochem, Die Nutzung industrieller Abwärme–technisch-wirtschaftliche Potenziale und energiepolitische Umsetzung (2010), http://www.isi.fraunhofer.de/isi-media/docs/e/de/ publikationen/Nutzung_industrieller_Abwaerme.pdf. Accessed 18 Jan 2015.
Specifications. http://www.marlow.com/power-generators/ standard-generators/tg12-8-01ls.html. Accessed 18 Jan 2015.
H. Wang, W.D. Porter, H. Böttner, J. König, L. Chen, S. Bai, T.M. Tritt, A. Mayolet, J. Senawiratne, C. Smith, F. Harris, P. Gilbert, J.W. Sharp, J. Lo, H. Kleinke, and L. Kiss, J. Electron. Mater. 42, 654 (2013).
Datasheet. http://sctbnord.com/lib/articles_foto/TMG-18-5.0-1.1. pdf. Accessed 18 Jan 2015.
K.S. Siow, J. Alloys Compd. 514, 6 (2012).
K.S. Siow, J. Electron. Mater. 43, 947 (2014).
G. Palm, German Patent: DE 10 2004 019 567 B3, 2006.
J. Kähler, A. Stranz, A. Waag, and E. Peiner, J. Electron. Mater. 43, 2397 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Proceedings of ICT Joint Conference 2014, July 7–10, 2012, Nashville, USA.
Rights and permissions
About this article
Cite this article
Stranz, A., Waag, A. & Peiner, E. Investigation of Thermoelectric Parameters of Bi2Te3: TEGs Assembled using Pressure-Assisted Silver Powder Sintering-Based Joining Technology. J. Electron. Mater. 44, 2055–2060 (2015). https://doi.org/10.1007/s11664-015-3655-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-015-3655-2