Abstract
In order to improve the dimensional stability of wood-polymer composites, wood flour pre-treated by polyethylene glyco1 (PEG) at two different concentrations and then thermally treated at 140°C, was used as raw material to produce wood flour/polypropylene (PP) composites at a wood content of 40%. The structure of modified wood flour was analyzed with a scanning electron microscope (SEM) and its effect on the physical and mechanical properties of wood flour/PP composites was evaluated. The SEM results indicated the “bulking” effect of PEG on wood flour, which resulted in reduced water uptake. The combination of PEG and heat treatment further improved the moisture resistance of the composites. However, PEG modification had a negative effect on the flexural modulus of rupture (MOR) and the modulus of elasticity (MOE); whereas heat treatment partly compensated for this reduction. For dynamic mechanical properties, PEG treatment decreased the storage modulus (E′). However, the heat treatment resulted in an increase of E′ of the wood flour/PP composites, with the temperature of loss factor peaks shifting to a higher temperature.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Alma M H, Hafizolu H, Maldas D. 1996. Dimensional stability of several wood species treated with vinyl monomers and polyethylene glycol-1000. Intal J Polym Material, 32(1): 93–99
Bardet M, Gerbaud G, Tran Q, Hediger S. 2006. Study of interactions between polyethylene glycol and archaeological wood components by C-13 high-resolution solid-state CPMAS NMR. J Archaeolog Sci, 34(10): 1670–1676
Bjurhager I, Ljungdahl J, Wallstrom L, Gamstedt E K, Berglund L A. 2010. Towards improved understanding of PEG-impregnated waterlogged archaeological wood: A model study on recent oak. Holzforschung, 64(2): 243–250
Campbell M D, Coutts R S P. 1980. Wood fibre-reinforced cement composites. J Material Sci, 15: 1962–1970
Cao J, Wang Y, Xu W, Wang L. 2010. Preliminary study of viscoelastic properties of MAPP-modified wood flour/polypropylene composites. Forest Stud China, 12(2): 1–5
Felix J M, Gatenholm P. 1991. The nat ure of adhesion in composites of modified cellulose fibers and polypropylene. J Appl Polym Sci, 42(3): 609–620
Felix J M, Gatenholm P, Schreiber H P. 1993. Controlled interactions in Cellulosepolymer composites. 1: Effect on mechanical properties. Polym Composit, 14(6): 449–457
Ghasemi I, Kord B. 2009. Long-term water absorption behaviour of polypropylene/wood flour/organoclay hybrid nanocomposite. Iranian Polym J, 18(9): 683–691
Hafors B. 1990. The role of the Wasa in the development of the polyethylene glycol preservation method. Adv Chem, 225(8): 195–216
Hrabalova M, Gregorova A, Wimmer R, Sedlarik V, Machovsky M, Mundigler N. 2010. Effect of wood flour loading and thermal annealing on viscoelastic properties of poly(lactic acid) composite films. J Appl Polym Sci, 118(3): 1534–1540
Hillis W E. 1984. High temperature and chemical effects on wood stability. Wood Sci Technol, 18(4): 281–293
Jeremic D, Cooper P, Brodersen P. 2007a. Penetration of poly (ethylene glycol) into wood cell walls of red pine. Holzforschung, 61(3): 272–278
Jeremic D, Cooper P, Heyd D. 2007b. PEG bulking of wood cell walls as affected by moisture content and nature of solvent. Wood Sci Technol, 41(7): 597–606
Kamdem D P, Pizzi A, Jermannaud A. 2002. Durability of heattreated wood. Europ J Wood Wood Product, 60(1): 1–6
Kazayawoko M, Balatinecz J J, Matuana L M. 1999. Surface modification and adhesion mechanisms in woodfiber-polypropylene composites. J Mater Sci, 34(24): 6189–6199
Kelley S S, Rials T G, Glasser W G. 1987. Relaxation behavior of the amorphous components of wood. J Mater Sci, 22(2): 617–624
Kitani Y, Ohsawa J, Nakato K. 1970. Adsorption of polyethylene glycol on water-swollen wood versus molecular weight. Mokuzai Gakkaishi, 16(7): 326–333
Liu E P, Wolcott M P, Gardner D J, Rials T G. 1994. Characterization of the interface between cellulosic fibers and a thermoplastic matrix. Composit Interf, 2(6): 419–432
Matuana L A, Woodhams R T, Balatinecz J J, Park C B. 1998. Influence of interfacial interactions on the properties of PVC/Cellulosic fiber composites. Polym Composit, 19(4): 446–455
Nenkova S, Dobrilova C, Natov M, Vasileva S, Velev P. 2006. Modification of wood flour with maleic anhydride for manufacture of wood-polymer composites. Polym Polym Compoit, 14(2):185–194
Oksman K, Lindberg H. 1995. Interaction between wood and synthetic polymers. Holzfors-chung, 49(3): 249–254
Qin T, Huang L, Li G. 2005. Effect of chemical modification on the properties of wood/polypropylene composites. J Forest Res, 16(3): 241–244
Raj R G, Kokta B V. 1991. Reinforcing high density polyethylene with cellulosic fibers. I: The effect of additives on fiber dispersion and mechanical properties. Polym Engineer Sci, 31(18): 1358–1362
Salaita G N, Ma F M S, Parker T C, Hoflund G B. 2008. Weathering properties of treated southern yellow pine wood examined by X-ray photoelectron spectroscopy, scanning electron microscopy and physical characterization. Appl Surf Sci, 254(13): 3925–3934
Schirp A, Stoll B, Mai C, Richter E, Militz H. 2007. Chemical modification of wood particles for the production of woodplastic composites using N-methylol compounds and paraffin. 9th International Conference on Wood & Biofiber Plastic Composites. Madison, USA
Stamm A J. 1964. Factors affecting the bulking and dimensional stabilization of wood with polyethylene glycols. Forest Prod J, 14(9): 403–408
Tjeerdsma B F, Boonstra M, Pizzi A, Tekely P, Militz H. 1998. Characterisation of thermally modified wood: molecular reasons for wood performance improvement. Holz Roh-Werkstoff, 56:149–153
Tuong V M, Li J. 2010. Effect of heat treatment on the change in color and dimensional stability of acacia hybrid wood. Bioresources, 5(2): 1257–1267
Udaka E, Furuno T. 2003. Change in crystalline structure of compressed wood by treatment with a closed heating system. J Jpn Wood Res Soc, 49(1): 1–6
Zhang S, Zhang Y, Bousmina M, Sain M, Chol P. 2007. Effects of raw fiber materials, fiber content, and coupling agent content on selected properties of polyethylene/wood fiber composites. Polym Engineer Sci, 47(10): 1678–1687
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Luo, Sp., Cao, Jz. & Wang, X. Properties of PEG/thermally modified wood flour/polypropylene (PP) composites. For. Stud. China 14, 307–314 (2012). https://doi.org/10.1007/s11632-012-0405-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11632-012-0405-x