Abstract
The 0.6mol% CuO-doping 0.996(0.95Na0.5K0.5NbO3-0.05LiSbO3)-0.004FeBiO3 (KNN-LSBF-CuO) piezoelectric ceramics were synthesized by a solid-state reaction technique, and the structure and piezoelectric properties dependence of sintering time in KNN-LS-BF-CuO ceramics were studied. It is found that all the samples sintered for various time are perovskite structure mixed with orthorhombic symmetry phase and tetragonal phase, but the sintering time has significant influences on the crystalline and properties. When the sintering time increases from 2 hours to 6 hours, the grain of KNN-LS-BF-CuO ceramics becomes more homogeneous and more tight-arrangement. The experimental results reveal that the longer sintering time than 4 hours is beneficial for improving partial properties, such as d33, tgδ, and Qm, but is adverse to εr and kp, the KNNLS-BF-CuO ceramics with optimum properties can be synthesized for 6 hours at 1 060 °C.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Schreiter M, Gabl R, Pitzer D, et al. Electro–acoustic Hysteresis Behaviour of PZT Thin Film Bulk Acoustic Resonators[J]. J. Eur. Ceram. Soc., 2004, 24: 1 589–1 592
Wang DW, Cao MS, Zhang SJ. Investigation of Ternary System Pb(Sn,Ti)O3–Pb(Mg1/3Nb2/3) O3 with Morphotropic Phase Boundary Compositions[J]. J. Eur. Ceram. Soc., 2012, 32: 441–448
Lin Y, Zhang L, Yu J. Stable Piezoelectric Property of Modified BiFeO3–BaTiO3 Lead–free Piezoceramics[J]. J. Mater. Sci.: Mater. Electron., 2015, 26: 8 432–8 441
Zuo RZ, Ye C, Fang XS. Na0.5K0.5NbO3–BiFeO3 Lead–free Piezoelectric Ceramics[J]. J. Phys. Chem. Solids, 2008, 69: 230–235
Wu L, Ning H. Preparation and Piezoelectric Properties of CuO–added (Ag0.75Li0.1Na0.1K0.05)NbO3 Lead–free Ceramics[J]. J. Wuhan Univ. Tech. Mater. Sci. Ed., 2015, 30(4): 724–728
Tong K, Zhou C, Wang J, et al. Enhanced Piezoelectricity and Hightemperature Sensitivity of Zn–modified BF–BT Ceramics by in–situ and ex–situ Measuring[J]. Ceramics International, 2017, 43(4): 3 734–3 740
Yang H, Zhou C, Zhou Q, et al. Lead–free (Li, Na, K)(Nb, Sb)O3 Piezoelectric Ceramics: Effect of Bi(Ni0.5Ti0.5)O3 Modification and Sintering Temperature on Microstructure and Electrical Properties[J]. J. Mater. Sci., 2013, 48(7): 2 997–3 002
Wu JG, Xiao DQ, Wang YY, et al. Compositional Dependence of Phase Structure and Electrical Propertis in (K0.42Na0.58)NbO3–LiSbO3 Lead–free Ceramics[J]. J. Appl. Phys., 2007, 102: 114113–1–3
Wongsaenmai S, Kanchiang K, Chandarak S. Crystal Structure and Ferroelectric Properties of Mn–doped ((K0.5Na0.5)0.935Li0.065)NbO3 Leadfree Ceramics[J]. Curr. Appl. Phys., 2012, 12: 418–421
Huang T, Xiao DQ, Liang WF, et al. Sintering Behavior of KNNBNKT Lead–free Piezoelectric Ceramics[J]. Ferroelectrics, 2014, 458(1): 37–42
Wang HQ, Ruan DS, Dai YJ, et al. Relationship between Phase Structure and Electrical Properties of (K0.5Na0.5)NbO3–LiTaO3 Leadfree Ceramics[J]. Curr. Appl.Phys., 2012, 12: 504–508
Jin JM, Wan DD, Yang Y, et al. A Linear Ultrasonic Motor Using (K0.5Na0.5)NbO3 Based Lead–free Piezoelectric Ceramics[J]. Sensor. Actuat. A, 2011, 165: 410–414
Yang H, Zhou C, Zhou Q, et al. Lead–free (Li, Na, K)(Nb, Sb)O3 Piezoelectric Ceramics: Effect of Bi(Ni0.5Ti0.5)O3 Modification and Sintering Temperature on Microstructure and Electrical Properties[J]. J. Mater. Sci., 2013, 48(7): 2 997–3 002
Jiang M, Liu X, Chen G, et al. Dielectric and Piezoelectric Properties of LiSbO3 Doped 0.995 K0.5Na0.5NbO3–0.005BiFeO3 Piezoelectric Ceramics[J]. Mater. Lett., 2009, 63(15): 1 262–1 265
Coondoo I, Panwar N, Maiwa H, et al. Improved Piezoelectric and E n e r g y H a r v e s t i n g C h a r a c t e r i s t i c s i n L e a d–f r e e F e 2O3 Modified KNN Ceramics[J]. J. Electroceramics, 2015, 34(4): 255–261
Zhao D, Fu XH, Cheng GY, et al. The Effect of Excess Sodium Element on KNN–BF Piezoelectric Ceramics[J]. Mater. Sci. Forum, 2016, 859: 24–29
Jin X, Fu XH, Tao WH, et al. Piezoelectric Properties Study of KNNLS Lead–free Ceramics Synthesized by Sol–gel Method[J]. Appl. Mechanics Mater., 2014, 538: 15–18
Jiang M, Liu X, Chen G, et al. Sintering Characteristics of Lead–free K0.5Na0.5NbO3–LiSbO3–BiFeO3 Piezoelectric Ceramics[J]. J. Chin. Ceram. Soc., 2011, 39(7): 1 165–1 169
Cheng GY, Fu XH, Tao WH, et al. Influence of Sintering Temperature on KNN–BF–LS Piezoelectric Ceramic[J]. Mater. Sci. Forum, 2016, 859: 8–12
Wang H, Zuo R, Wang L, et al. Preparation and Piezoelectric Properties of CuO–doped (Na0.5K0.5)NbO3 Ceramics by the Citrate Precursor Method[J]. J. Mater. Sci.: Mater. Electron., 2011, 22: 458–462
Wang H, Zhai X, Xu J, et al. Temperature Stability of V2O5–doped KNN–LS–BF Lead–free Piezoelectric Ceramics[J]. J. Electro. Mater., 2013, 48: 2 556–2 559
Liu C, Xiao DQ, Wu JG, et al. Electrical Properties of CuO–doped (K0.5Na0.5)(Nb0.92Sb0.03Ta0.05)O3 Piezoelectric Ceramics with High Qm[J]. Ferroelectrics, 2014, 458(1): 31–36
Zhao Y, Zhao Y, Huang R, et al. Microstructure and Piezoelectric Properties of CuO–doped 0.95(K0.5Na0.5)NbO3–0.05Li(Nb0.5Sb0.5) O3 Lead–free Ceramics[J]. J. Eur. Ceram. Soc., 2011, 31(11): 1 939–1 944
Author information
Authors and Affiliations
Corresponding author
Additional information
Funded by the Guangxi Natural Science Foundation (No. 2010GXNSFD013007)
Rights and permissions
About this article
Cite this article
Wang, H., Zhai, X., Xu, J. et al. Effect of Sintering Time on Structure and Properties in CuO-doping KNN-LS-BF Piezoelectric Ceramics. J. Wuhan Univ. Technol.-Mat. Sci. Edit. 34, 308–311 (2019). https://doi.org/10.1007/s11595-019-2052-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11595-019-2052-8