Abstract
Donor-acceptor (D-A)-conjugated polymers P(BT-C1) and P(BT-C2), with dithieno[2,3-b;7,6-b]carbazole (C1) or dithieno[ 3,2-b;6,7-b]carbazole (C2) as D-unit and benzothiadiazole (BT) as A-unit, were synthesized. The optical bandgaps of the polymers are similar (1.84 and 1.88 eV, respectively). The structures of donor units noticeably influence the energy levels and backbone curvature of the polymers. P(BT-C1) shows a large backbone curvature; its highest occupied molecular orbital (HOMO) energy level is −5.18 eV, whereas P(BT-C2) displays a pseudo-straight backbone and has a HOMO energy level of −5.37 eV. The hole mobilities of the polymers without thermal annealing are 1.9×10−3 and 2.7×10−3 cm2V−1s−1 for P(BT-C1) and P(BT-C2), respectively, as measured by organic thin-film transistors (OTFTs). Polymer solar cells using P(BT-C1) and P(BT-C2) as the donor and phenyl-C71-butyric acid methyl ester (PC71BM) as the acceptor were fabricated. Power conversion efficiencies (PCEs) of 4.9% and 5.0% were achieved for P(BT-C1) and P(BT-C2), respectively. The devices based on P(BT-C2) exhibited a higher V oc due to the deeper HOMO level of the polymer, which led to a slightly higher PCE.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Cao WR, Xue JG. Recent progress in organic photovoltaics: device architecture and optical design. Energy Environ Sci, 2014, 7: 2123–2144
Brabec CJ, Gowrisanker S, Halls JJM, Laird D, Jia SJ, Williams SP. Polymer-fullerene bulk-heterojunction solar cells. Adv Mater, 2010, 22: 3839–3856
Li YF. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. Acc Chem Res, 2012, 45: 723–733
Li G, Zhu R, Yang Y. Polymer solar cells. Nat Photonics, 2012, 6: 153–161
Zhou HX, Yang LQ, You W. Rational design of high performance conjugated polymers for organic solar cells. Macromolecules, 2012, 45: 607–632
Zhang ZG, Wang JZ. Structures and properties of conjugated donor-acceptor copolymers for solar cell applications. J Mater Chem, 2012, 22: 4178–4187
Cheng YJ, Yang SH, Hsu CS. Synthesis of conjugated polymers for organic solar cell applications. Chem Rev, 2009, 109: 5868–5923
Günes S, Neugebauer H, Sariciftci NS. Conjugated polymer-based organic solar cells. Chem Rev, 2007, 107: 1324–1338
Chao YH, Jheng JF, Wu JS, Wu KY, Peng HH, Tsai MC, Wang CL, Hsiao YN, Wang CL, Lin CY, Hsu CS. Porphyrin-incorporated 2D D-A polymers with over 8.5% polymer solar cell efficiency. Adv Mater, 2014, 26: 5205–5210
Zhang MJ, Guo X, Ma W, Zhang SQ, Huo LJ, Ade H, Hou JH. An easy and effective method to modulate molecular energy level of the polymer based on benzodithiophene for the application in polymer solar cells. Adv Mater, 2014, 26: 2089–2095
Yusoff ARM, Lee SJ, Kim HP, Shneider FK, Silva WJ, Jang J. 8.91% power conversion efficiency for polymer tandem solar cells. Adv Funct Mater, 2014, 24: 2240–2247
Jiang JM, Lin HK, Lin YC, Chen HC, Lan SC, Chang CK, Wei KH. Side chain structure affects the photovoltaic performance of two-dimensional conjugated polymers. Macromolecules, 2014, 47: 70–78
Li K, Li ZJ, Feng K, Xu XP, Wang LY, Peng Q. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells. J Am Chem Soc, 2013, 135: 13549–13557
Zhang MJ, Gu Y, Guo X, Liu F, Zhang SQ, Huo LJ, Russell TP, Hou JH. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%. Adv Mater, 2013, 25: 4944–4949
Wang N, Chen Z, Wei W, Jiang ZH. Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments. J Am Chem Soc, 2013, 135: 17060–17068
Guo XG, Zhou NJ, Lou SJ, Smith J, Tice DB, Hennek JW, Ortiz RP, Navarrete JTL, Li SY, Strzalka J, Chen LX, Chang RPH, Facchetti A, Marks TJ. Polymer solar cells with enhanced fill factors. Nat Photonics, 2013, 7: 825–833
Son HJ, Lu LY, Chen W, Xu T, Zheng TY, Carsten B, Strzalka J, Darling SB, Chen LX, Yu LP. Synthesis and photovoltaic effect in dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers. Adv Mater, 2013, 25: 838–843
Li XH, Choy WCH, Huo LJ, Xie FX, Sha WEI, Ding BF, Guo X, Li YF, Hou JH, You JB, Yang Y. Dual plasmonic nanostructures for high performance inverted organic solar cells. Adv Mater, 2012, 24: 3046–3052
Chu TY, Lu JP, Beaupré S, Zhang YG, Pouliot JR, Zhou JY, Najari A, Leclerc M, Tao Y. Effects of the molecular weight and the sidechain length on the photovoltaic performance of dithienosilole/thienopyrrolodione copolymers. Adv Funct Mater, 2012, 22: 2345–2351
Ye L, Zhang SQ, Zhao WC, Yao HF, Hou JH. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain. Chem Mater, 2014, 26: 3603–3605
You JB, Dou LT, Yoshimura K, Kato T, Ohya K, Moriarty T, Emery K, Chen CC, Gao J, Li G, Yang Y. A polymer tandem solar cell with 10.6% power conversion efficiency. Nat Commun, 2013, 4: 1446–1455
Blouin N, Michaud A, Leclerc M. A low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells. Adv Mater, 2007, 19: 2295–2300
Liu J, Shao SY, Fang G, Meng B, Xie ZY, Wang LX. High-efficiency inverted polymer solar cells with transparent and work-function tunable MoO3-Al composite film as cathode buffer layer. Adv Mater, 2012, 24: 2774–2779
Liu J, Shao SY, Meng B, Fang G, Xie ZY, Wang LX, Li XL. Enhancement of inverted polymer solar cells with solution-processed ZnO-TiOx composite as cathode buffer layer. Appl Phys Lett, 2012, 100: 213906
Yang SP, Zhang Y, Jiang T, Sun XF, Lu CQ, Li G, Li XW, Fu GS. Enhancing the power conversion efficiency of PCDTBT:PC71BM polymer solar cells using a mixture of solvents. Chin Sci Bull, 2014, 59: 297–300
Qin RP, Li WW, Li CH, Du C, Veit C, Schleiermacher HF, Andersson M, Bo ZS, Liu ZP, Inganäs O, Wuerfel U, Zhang FL. A planar copolymer for high efficiency polymer solar cells. J Am Chem Soc, 2009, 131: 14612–14613
Qin RP, Jiang YR, Ma H, Yang L, Liu HZ, Chang FG. Carbazoles on same main chain for polymer solar cells. J Appl Polym Sci, 2013, 129: 2671–2678
Ding P, Chu CC, Zou YP, Xiao DQ, Pan CY, Hsu CS. New low bandgap conjugated polymer derived from 2,7-carbazole and 5, 6-bis(octyloxy)-4,7-di(thiophen-2-yl) benzothiadiazole: synthesis and photovoltaic properties. J Appl Polym Sci, 2012, 123: 99–107
Zhang Y, Zhou HQ, Seifter J, Ying L, Mikhailovsky A, Heeger AJ, Bazan GC, Nguyen TQ. Molecular doping enhances photoconductivity in polymer bulk heterojunction solar cells. Adv Mater, 2013, 25: 7038–7044
Meng B, Fang G, Fu YY, Xie ZY, Wang LX. Fine tuning of the PCDTBT-OR:PC71BM blend nanoscale phase separation via selective solvent annealing toward high-performance polymer photovoltaics. Nanotechnology, 2013, 24: 484004
Chang CY, Cheng YJ, Hung SH, Wu JS, Kao WS, Lee CH, Hsu CS. Combination of molecular, morphological, and interfacial engineering to achieve highly efficient and stable plastic solar cells. Adv Mater, 2012, 24: 549–553
Wu JS, Cheng YJ, Lin TY, Chang CY, Shih PI, Hsu CS. Dithienocarbazolebased ladder-type heptacyclic arenes with silicon, carbon, and nitrogen bridges: synthesis, molecular properties, fieldeffect transistors, and photovoltaic applications. Adv Funct Mater, 2012, 22: 1711–1722
Jacob J, Sax S, Piok T, List EJW, Grimsdale AC, Müllen K. Laddertype pentaphenylenes and their polymers: efficient blue-light emitters and electron-accepting materials via a common intermediate. J Am Chem Soc, 2004, 126: 6987–6995
Mishra AK, Graf M, Grasse F, Jacob J, List EJW, Müllen K. Blue-emitting carbon- and nitrogen-bridged poly(ladder-type tetraphenylene) s. Chem Mater, 2006, 18: 2879–2885
Cheng YJ, Ho YJ, Chen CH, Kao WS, Wu CE, Hsu SL, Hsu CS. Synthesis, photophysical and photovoltaic properties of conjugated polymers containing fused donor-acceptor dithienopyrrolobenzothiadiazole and dithienopyrroloquinoxaline arenes. Macromolecules, 2012, 45: 2690–2698
Chen CH, Cheng YJ, Chang CY, Hsu CS. Donor-acceptor random copolymers based on a ladder-type nonacyclic unit: synthesis, characterization, and photovoltaic applications. Macromolecules, 2011, 44: 8415–8424
Ando SJ, Nishida JI, Tada H, Inoue YJ, Tokito S, Yamashita Y. High performance n-type organic field-effect transistors based on π-elec tronic systems with trifluoromethylphenyl groups. J Am Chem Soc, 2005, 127: 5336–5337
Liang YY, Wu Y, Feng DQ, Tsai ST, Son HJ, Li G, Yu LP. Development of new semiconducting polymers for high performance solar cells. J Am Chem Soc, 2009, 131: 56–57
Koster LJA, Shaheen SE, Hummelen JC. Pathways to a new efficiency regime for organic solar cells. Adv Energy Mater, 2012, 2: 1246–1253
Chen YG, Tian HK, Yan DH, Geng YH, Wang FS. Conjugated polymers based on a S- and N-containing heteroarene: synthesis, characterization, and semiconducting properties. Macromolecules, 2011, 44: 5178–5185
Chen YG, Liu CF, Tian HK, Bao C, Zhang XJ, Yan DH, Geng YH, Wang FS. Novel conjugated polymers based on dithieno[3,2-b: 6,7-b]carbazole for solution processed thin-film transistors. Macromol Rapid Commun, 2012, 33: 1759–1764
Deng YF, Chen YG, Zhang XJ, Tian HK, Bao C, Yan DH, Geng YH, Wang FS. Donor-acceptor conjugated polymers with dithienocarbazoles as donor units: effect of structure on semiconducting properties. Macromolecules, 2012, 45: 8621–8627
Deng YF, Chen YG, Liu J, Liu LH, Tian HK, Xie ZY, Geng YH, Wang FS. Low-band-gap conjugated polymers of dithieno [2,3-b:7, 6-b]carbazole and diketopyrrolopyrrole: effect of the alkyl side chain on photovoltaic properties. ACS Appl Mater Interfaces, 2013, 5: 5741–5747
Deng YF, Liu J, Wang JT, Liu LH, Li WL, Tian HK, Zhang XJ, Xie ZY, Geng YH, Wang FS. Dithienocarbazole and isoindigo based amorphous low bandgap conjugated polymers for efficient polymer solar cells. Adv Mater, 2014, 26: 471–476
Jespersen KG, Beenken WJD, Zaushitsyn Y, Yartsev A, Andersson M, Pullerits T, Sundström V. The electronic states of polyfluorene copolymers with alternating donor-acceptor units. J Chem Phys, 2004, 121: 12613–12617
Peet J, Cho NS, Lee SK, Bazan GC. Transition from solution to the solid state in polymer solar cells cast from mixed solvents. Macromolecules, 2008, 41: 8655–8659
Kim JG, Yun MH, Kim GH, Lee JH, Lee SM, Ko SJ, Kim YH, Dutta GK, Moon MJ, Park SY, Kim DS, Kim JY, Yang CD. Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control. ACS Appl Mater Interfaces, 2014, 6: 7523–7534
Casey A, Ashraf RS, Fei ZP, Heeney M. Thioalkyl-substituted benzothiadiazole acceptors: copolymerization with carbazole affords polymers with large stokes shifts and high solar cell voltages. Macromolecules, 2014, 47: 2279–2288
Lee WH, Kim GH, Ko SJ, Yum SJ, Hwang SG, Cho S, Shin YH, Kim JY, Woo HY. Semicrystalline D-A copolymers with different chain curvature for applications in polymer optoelectronic devices. Macromolecules, 2014, 47: 1604–1612
Zuo GZ, Li ZJ, Zhang MJ, Guo X, Wu Y, Zhang SQ, Peng B, Wei W, Hou JH. Influence of the backbone conformation of conjugated polymers on morphology and photovoltaic properties. Polym Chem, 2014, 5: 1976–1981
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Rights and permissions
About this article
Cite this article
Rong, Z., Deng, Y., Xie, Z. et al. Dithienocarbazole- and benzothiadiazole-based donor-acceptor conjugated polymers for bulk heterojunction polymer solar cells. Sci. China Chem. 58, 294–300 (2015). https://doi.org/10.1007/s11426-014-5221-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11426-014-5221-9