Using scanning tunneling microscopy, it is shown that a lath structure is formed in the heat-affected zone of the low-carbon, low-alloy 09G2S steel after electric arc surfacing. Analysis of the results of scanning tunneling microscopy revealed a number of subtle morphological features of the lath structure, which makes it possible to explain the mechanism of its formation and identify it as lower bainite. The lower bainite structure in the heat-affected zone of the base metal of the 09G2S steel is favourable for increasing the impact strength of the coating – base metal composition, which was established earlier in our work.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
H. K. D. H. Bhadeshia, Bainite in Steels. Theory and Practice, CRC Press, London (2015); https://doi.org/10.1201/9781315096674.
D. V. Edmonds and R.C. Cochrane, Metall. Trans. A, 21, 1527–1540 (1990); https://doi.org/10.1007/BF02672567.
O. Grong and D. K. Matlock, International Metals Reviews, 31 No. 1, 27–38 (1986); https://doi.org/10.1179/imtr.1986.31.1.27.
B. L. Bramfitt and J. G. Speer, Metall. Trans. A, 21, No. 3, 817–829 (1990); https://doi.org/10.1007/BF02656565.
A. Yu. Kaletin, Yu. V. Kaletina, and M. A. Ryzhkov, Lett. Mater., 10, No. 3, 249–253 (2020); https://doi.org/10.22226/2410-3535-2020-3-249-253.
V. M. Schastlivtsev, T. I. Tabatchikova, I. L. Yakovleva, et al., Iss. Mater. Sci., No. 3, 26–38 (2009).
P. V. Kuznetsov, N. K. Galchenko, and Yu. I. Pochivalov, Crystals, 13, 146 (2023); https://doi.org/10.3390/cryst.13010146.
P. V. Kuznetsov, N. K. Galchenko, I. V. Belyaeva, et al., Russ. Phys. J., 64, No. 4, 605–611 (2021);https://doi.org/10.1007/s11182-021-02383-6.
H. S. Fang, J. J. Wang, Z. G. Yang, et al., Metall. Mater. Trans. A, 27A, 1535–1545 (1996); https://doi.org/10.1007/BF02649813.
E. Girault, P. Jacques, Ph. Harlet, et al., Mater. Charact., 40, 111–118 (1998); https://doi.org/10.1016/S1044-5803(97)00154-X.
G. Krauss and S. W. Thomson, ISIJ Int., 35, No 8, 937–945 (1995); https://doi.org/10.2355/isijinternational.35.937.
H. G. Yang, J. J. Wang, C. M. Li, et al., J. Mat. Sci. Lett., 17, 331–333 (1998); https://doi.org/10.1023/A:1006550126306.
H. K. D. H. Bhadeshia and D. V. Edmonds, Metall. Trans. A, 10, 895–907 (1979); https://doi.org/10.1007/BF02658309.
R. F. Hehemann, K. R. Kinsman, and H. I. Aaronson, Metall. Trans., 3, 1077–1094 (1972); https://doi.org/10.1007/BF02642439.
E. Sarath Kumar Menon and H. I. Aaronson, Acta Metall., 35, No. 3, 549–563 (1987); https://doi.org/10.1016/0001-6160(87)90179-9.
F. G. Caballero, Carbide-Free Bainite in Steels, in: Phase Transformations in Steels. Fundamentals and Diffusion-Controlled Transformations, Vol. 1, Ch. 12, Woodhead Publishing Series in Metals and Surface Engineering (2012), pp. 436-467; https://doi.org/10.1533/9780857096104.3.43.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Kuznetsov, P.V. Features of the Lath Microstructure in the Heataffected Zone of the 09G2S Steel After Manual Arc Surfacing. Russ Phys J 67, 1186–1191 (2024). https://doi.org/10.1007/s11182-024-03232-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-024-03232-y