The microstructure and mechanical properties of Ti–TiB based short-fiber composite materials manufactured by casting and subjected to deformation processing are investigated. Commercially pure VT1-0 titanium and two-phase VT8 alloys are used for matrix alloys. It is established that the short-fiber composite materials comprising about 10 vol.% of titanium monoboride can be successfully prepared by conventional casting. Regimes of deformation processing of the composite materials providing reorientation of titanium monoboride fibers with retention of a high length-to-diameter ratio are developed. The composite materials after deformation processing demonstrate higher strength characteristics and, as demonstrated for the VT8 based composite, high-temperature strength compared to the matrix material without a radical reduction of ductility.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Yu. S. Karabasova, ed., Novel Materials [in Russian], Publishing House of Moscow Institute of Steel and Alloys, Moscow (2002).
K. S. R. Chandran, K. B. Panda, and S. S. Sahay, JOM, 56, 42–48 (2004).
T. Saito, JOM, 56, 33–36 (2004).
J. W. Simmons, D. E. Alman, and J. A. Hawk, Int. J. Powder Met., 33, 9–11 (1997).
W. Tong, G. Ravichandran, T. Christman, and T. Vreeland, Acta Metall., 43, 235–250 (1995).
T. M. T. Godfey, P. S. Goodwin, and C. M. Ward-Close, in: Proc. 8th World Conference on Titanium, Saint Petersburg (1999), pp. 1868-1875.
A. I. Khorev, Rus. Eng. Res., 11, 1087 (2011).
A. A. Sarkeeva, Pis’ma Mater., 2, No. 3, 166–169 (2012).
L. J. Huang, L. Geng, B. Wang, and L. Z. Wu, Mater. Design, 45, 532–538 (2013).
M. S. Kumar, P. Chandrasekar, P. Chandramohan, and M. Mohanray, Mater. Characteriz., 73, 43–51 (2012).
S. Abkowitz, S. M. Abkowitz, H. Fisher, and P. J. Schwartz, JOM, 56, 37–41 (2004).
H. T. Tsang, C. G. Chao, and C. Y. Ma, Scr. Mater., 37, 1359–1365 (1997).
D. Hill, R. Banerjee, D. Huber, et al., Scr. Mater., 52, 387–392 (2005).
O. M. Ivasishin, R. V. Teliovych, V. G. Ivanchenko, et al., Metall. Mater. Trans., 39A, 402–416 (2008).
C. Zhang, F. Kong, Sh. Xiao, et al., Mater. Design, 36, 505–510 (2012).
C. J. Zhang, F. T. Kong, S. L. Xiao, et al., Mater. Sci. Eng., A548, 152–160 (2012).
C. J. Zhang, F. T. Kong, L. J. Xu, et al., Mater. Sci. Eng., A556, 962–969 (2012).
L. Xiao, W. J. Lu, J. N. Qin, and Y. F. Chen, Mater. Sci. Eng., A499, 500–506 (2009).
V. M. Imayev, R. A. Gaisin, E. R. Gaisina, et al., Mater. Sci. Eng., A609, 34–41 (2014).
I. Sen, L. Maheshwari, S. Tamirisakandala, et al., Mater. Sci. Eng., A518, 162–166 (2009).
M. J. Koo, J. S. Park, M. K. Park, et al., Scr. Mater., 66, 487–490 (2012).
X. Guo, L. Wang, M. Wang, et al., Acta Mater., 60, 2656–2667 (2012).
H. L. Cox, Br. J. Appl. Phys., 3, 72–79 (1952).
O. P. Solonina and S. G. Glazunov, Creep Resistant Titanium Alloys [in Russian], Metallurgiya, Moscow (1976).
N. A. Nochovnaya, V. G. Antashev, A. A. Shiryaev, et al., Tekhnol. Legk. Splavov, 4, 92–99 (2012).
A. A. Il’in, B. A. Kolachev, and I. S. Pol’kin, Titanium Alloys [in Russian], Publishing House of All-Russian Institute of Light Alloys – Moscow Institute of Aviation Technology (ARILA-MIAT), Moscow (2009).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 100–105, June, 2015.
Rights and permissions
About this article
Cite this article
Gaisin, R.A., Imayev, V.M., Imayev, R.M. et al. Microstructure and Mechanical Properties of Ti–TiB Based Short-Fiber Composite Materials Manufactured by Casting and Subjected to Deformation Processing. Russ Phys J 58, 848–853 (2015). https://doi.org/10.1007/s11182-015-0580-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-015-0580-z