CuO nanowhiskers prepared by copper electrodeposition and subsequent annealing in air are experimentally investigated. A method of manufacturing nanowhisker structures is described. The bending strength of CuO nanowhiskers is estimated, the results of fatigue testing of nanowhiskers are presented, and the strengths of CuO and ZnO nanowhiskers are compared.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Q. Zhang, K. Zhang, D. Xu, et al., Prog. Mater. Sci., 60, 208–337 (2014).
A. A. Vikarchuk and A. P. Volenko, Fiz. Tverd. Tela, 47, No. 2, 339–344 (2005).
A. A. Vikarchuk, Vect. Nauki Tol’yattinsk. Gosud. Univ., No. 1, 7–16 (2009).
E. A. Gulbransen, T. P. Copan, and K. F. Andrew, J. Electrochem. Soc., 108, 119–123 (1961).
L. M. Dorogin, B. Polyakov, S. Vlassov, et al., Phys. Status Solidi, B250, No. 2, 305–317 (2013).
E. Tan, Y. Zhu, T. Yu, et al., Appl. Phys. Lett., 90, 163112-1–163112-3 (2007).
S. Hoffmann, F. Östlund, J. Michler, et al., Nanotechnology, 18, 205503-1–205503-5 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 6, pp. 95–99, June, 2015.
Rights and permissions
About this article
Cite this article
Priezzheva, A.N., Dorogov, M.V., Vlassov, S. et al. Elastic Properties of Oxide Nanowhiskers Prepared from Electrolytically Deposited Copper. Russ Phys J 58, 843–847 (2015). https://doi.org/10.1007/s11182-015-0579-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-015-0579-5