New types of refractory articles and coatings that have been created in recent years and that possess high heat-resistant, physico-chemical, and mechanical properties when in use in corrosive media with high heat demand are presented. Data on the use of refractory scrap as a secondary raw material for the production of refractory materials as well as for the manufacture of runner clay, mortar, and powders for different purposes are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. S. Lysin and Yu. S. Yusfin, The Resource and Ecological Problems of the 21st Century [in Russian], Vysshaya Shkola (1988), 252 pp.
A. N. Pyrikov, in: Refractory Materials Service. Environmental Protection in the Production and Use of Refractory Materials. Handbook [in Russian], Intermet Inzhinering, Moscow (2002), pp. 639 – 653.
A. N. Pyrikov, A. V. Likkhodievskii, and P. I. Chernousov, “State and outlook for the technology of engineered environmental protection,” in: Proc. Second International Congress, UGTU, UPI, Ekaterinburg (2006), pp. 95 – 99.
B. L. Krasnyi, V. P. Tarasovskii, A. B. Krasny, et al., “Corrosion resistance of chromium-containing refractory materials in different corrosive media,” Novye Ogneupory, No. 3, 37 (2007).
L. B. Pervukhin, V. S. Vladimirov, and S. E. Moyzis, “Manufacture of composite materials based on refractory oxide-ceramic material,” Novye Ogneupory, No. 3, 40 – 41 (2007).
A. N. Pyrikov, B. N. Grigor’ev and A. E. Frolov, “Ecological aspects, quality increase, and the resistance of refractory lining of blast furnaces,” in: Proc. Tenth International Conference, Ecology and the Development of Society, June 26 – 29, 2007, St. Petersburg, pp. 267 – 269.
V. V. Primachenko, V. V. Martynenko, L. A. Babkina, et al., “Use of scrap of refractory articles and normal electro-melted corundum in the production of ramming masses, dry mixtures, refractory concrete, and mortar,” Novye Ogneupory, No. 3, 42 (2007).
A. N. Pyrikov, S. K. Vil’danov, and A. V. Likhodievskii, “Paths to the solution of ecological problems in ferrous metallurgy,” Stal’, No. 5, 99 – 102 (2008).
O. N. Pitsik, I. G. Bespalova, and R. Sh. Nzmutdinov, “Refractory materials for regenerators of glass making furnaces,” Novye Ogneupory, No. 4, 18 – 19 (2009).
Author information
Authors and Affiliations
Additional information
Translated from Novye Ogneupory, No. 4, pp. 107 – 109, April, 2010.
Rights and permissions
About this article
Cite this article
Pyrikov, A.N., Vil’danov, S.K. & Likhodievskii, A.V. Certain aspects in the use of refractory materials and their waste products in industry. Refract Ind Ceram 51, 126–128 (2010). https://doi.org/10.1007/s11148-010-9273-x
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-010-9273-x