Abstract
The company has developed the technology and production of periclase-zircon components for glass-melting furnace regenerators. Tests have shown that they have substantial advantages over analogous items made in Russia. The distinctive features of the new refractories are high mechanical strength, together with chemical and erosion resistance to corrosive alkaline components. Physicochemical and thermophysical tests have shown that the items have good performance when used in glass-industry furnace regenerators.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
I. D. Kashcheev, Refractories for Industrial Plant and Furnaces. Vol. 2, Refractory Service (I. D. Kashcheev and E. E. Grishenkov) [in Russian], Intermet Inzhiniring, Moscow (2002).
T. V. Yarushina, “New developments at the Magnesite Corporation in the area of periclase-bearing refractories” (T. V. Yarushina and I. G. Bespalov), Novye Ogneupory, No. 5, 23–25 (2005).
P. P. Budnikov, The Chemical Technology of Ceramics and Refractories (P. P. Budnikov, V. L. Balkevich, A. S. Berezhnoi, et al.) [in Russian], Izd. Literatury po Stroitel’stvu, Moscow (1972).
K. K. Strelov, Structure and Properties of Refractories, 2nd Edition [in Russian], Metallurgiya, Moscow (1982).
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 2, pp. 41–44, February, 2008.
Rights and permissions
About this article
Cite this article
Margishvili, A.P., Kuznetsova, O.S. & Kovalenko, A.A. Periclase-zircon packing components for glass-melting furnace regenerators. Refract Ind Ceram 49, 63–66 (2008). https://doi.org/10.1007/s11148-008-9020-8
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-008-9020-8