Abstract
Experience of using OOO Gruppa Magnezit refractory materials in the lining of acid converters in Russia and the Ukraine is summarized briefly. Information is provided on the basis of results obtained in different metallurgical enterprises about the practice of using a set of measures promoting an increase in the operating life of converter linings.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
A. N. Smirnov, “Development of converter steel production in the world,” in: Advanced Technology in Steel Metallurgy: XXI Century [in Russian], Donetsk (2006).
R. S. Takhaumdinov, A. D. Nosov, V. F. D’yachenko, et al., “Experience of operating a converter zonal lining in OAO MMK,” Novye Ogneupory, No. 9, 3–5 (2003).
K. N. Demidov, A. M. Lamukhin, O. F. Shatilov, et al., “Steel smelting in converters using fluxes with a high magnesium oxide content,” Novye Ogneupory, No. 5, 13–21 (2005).
R. S. Takhaumdinov, V. G. Ovsyannikov, T. K. Prishchepova, et al., “Processing technology for applying a slag lining to a 375-ton converter,” Stal’, No. 11, 27–28 (1999).
K. N. Demidov, L. A. Smirnov, S. I. Kuznetsov, et al., “Use of MgO-containing fluxes during steel smelting in converters,” Stal’, No. 4, 22–25 (2007).
Author information
Authors and Affiliations
Additional information
__________
Translated from Novye Ogneupory, No. 1, pp. 5–9, January 2008.
Rights and permissions
About this article
Cite this article
Aksel’rod, L.M., Laptev, A.P. & Shlyapin, A.A. Refractory materials and methods for increasing the life of converter linings from experience of OOO Gruppa Magnezit. Refract Ind Ceram 49, 1–4 (2008). https://doi.org/10.1007/s11148-008-9016-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-008-9016-4