Abstract
A system approach to controlling the quality of detonation-sprayed coatings is developed. It includes such stages as selecting powder characteristics and gas composition, forming a gas-powder mixture, adjusting the parameters of two-phase pulse flow, and ensuring contact interaction needed to form the coating that depends on the material and preset service properties of the layer sprayed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
V. I. Shesternenkov, Detonation Spraying of Coatings [in Russian], Author’s Abstract of PhD Thesis, Inst. Probl. Materialoved. AN USSR, Kiev (1969), p. 22.
E. A. Astakhov, Studying of Detonation Spraying of Coatings and Their Properties [in Russian], Author’s Abstract of PhD Thesis, Inst. Probl. Materialoved. AN USSR, Kiev (1973), p. 29.
G. V. Samsonov, S. Yu, Sharivker, E. A. Astakhov, and A. P. Garda, “Some features of detonation spraying of coatings,” in: Inorganic and Organic Coatings [in Russian], Nauka, Leningrad (1975), pp. 80–86.
G. V. Samsonov, B. N. Dvukraev, S. Yu. Sharivker, et al., A Detonation Coating Machine [in Russian], Inventor’s Certificate No. 513728 USSR, Okryt. Izobret., No. 8 (1976).
A. I. Zverev, S. Yu. Sharivker, and E. A. Astakhov, Detonation Spraying of Coatings [in Russian], Sudostroenie, Leningrad (1979), p. 232.
E. A. Astakhov, A. I. Zverev, S. Yu. Sharivker, and V. I. Pashchenko, “Metering devices for detonation spray deposition,” Powder Metall. Met. Ceram., 18, No. 3, 203–206 (1979).
E. A. Astakhov, A. I. Zverev, S. Yu. Sharivker, et al., “Characteristics of two methods of powder introduction in detonation spray-deposition,” Powder Metall. Met. Ceram., 17, No. 1, 82–85 (1978).
E. A. Astakhov, “Perun-S detonation coating system,” Autom. Svarka, No. 2, 38–43 (2003).
E. A. Astakhov and V. S. Klimenko, Technology to Restore and Harden Workpieces with Detonation Coatings [in Russian], Znanie, Kiev (1981), p. 20.
S. Yu. Sharivker, Ts. A. Kanevskii, E. A. Astakhov, and K. D. Modylevskaya, “Surface relief on the basis metal in detonation spray deposition,” Powder Metall. Met. Ceram., 15, No. 2, 157–158 (1976).
Ts. A. Kanevskii, S. Yu. Sharivker, A. P. Garda, et al., “Electrical conductivity of detonation-deposited hard-alloy coatings,” Powder Metall. Met. Ceram., 14, No. 12, 1029–1032 (1975).
M. Kh. Shorshorov, et al., “Mechanism and kinetics of formation of protective coatings in detonation spraying,” in: Protective Coatings on Metals [in Russian], Issue 10, Naukova Dumka, Kiev (1975), p. 126.
S. V. Petrov and I. N. Karp, Plasma Air-Gas Spraying [in Russian], Naukova Dumka, Kiev (1993), p. 194.
A. I. Veinik, Theory of Alloy Hardening [in Russian], Mashgiz, Moscow (1960), p. 180.
K. A. Yushchenko, E. A. Astakhov, V. S. Klimenko, and Yu. S. Borisov, “Detonation spraying of strengthening coatings and its development,” in: New Processes and Equipment for Thermal-Spray and Vacuum Coating [in Russian], Inst. Élektosvarki NAN Ukrainy, Kiev (1990), pp. 26–32.
Yu. G. Tkachenko, V. V. Sychev, L. M. Apininskaya et al., “Wear resistant hard-alloy coatings,” Powder Metall. Met. Ceram., 14, No. 5, 552–554 (1975).
V. N. Gol’dfain, E. A. Astakhov, A. I. Zverev, and V. P. Lukina, “Antifriction properties of a VK15 alloy coating applied by the detonation method to VT5 alloy,” Powder Metall. Met. Ceram., 18, No. 1, 63–66 (1979).
E. A. Astakhov, V. N. Korzhik, and A. V. Chernyshev, Detonation Spraying of Amorphous and Microcrystalline Coatings [in Russian], Znanie, Kiev (1990), p. 20.
Yu. S. Borisov, V. E. Oliker, E. A. Astakhov, et al., “Structure and properties of gas-thermal coatings of Fe-B-C and Fe-Ti-B-C alloys,” Powder Metall. Met. Ceram., 26, No. 4, 313–318 (1987).
E. A. Astakhov, “Antifriction properties and corrosion resistance of Al2O3 detonation coating applied in ship mechanical engineering,” Automat. Svarka, No. 11, 20–22 (2004).
E. A. Astakhov, “Influence of detonation coatings on the mechanical properties of products,” Automat. Svarka, No. 6, 56–57 (2004).
Author information
Authors and Affiliations
Additional information
__________
Translated from Poroshkovaya Metallurgiya, Vol. 47, No. 1–2 (459), pp. 91–104, 2008.
Rights and permissions
About this article
Cite this article
Astakhov, E.A. Controlling the properties of detonation-sprayed coatings: Major aspects. Powder Metall Met Ceram 47, 70–79 (2008). https://doi.org/10.1007/s11106-008-0011-6
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11106-008-0011-6