Abstract
In this paper we report the design, construction and characterization of an electromechanical velocity modulator for application in Mössbauer spectroscopy. The modulator was constructed with copper coils, Neodymium magnets, steel cores and polymeric membranes. The magnetic field in the driving and velocity sensing stages was analyzed by the finite element method, which showed a linear relation between the magnetic field in the region of motion of both coils and the position of the coils within the steel cores. The results obtained by computational simulation allowed us to optimize geometries and dimensions of the elements of the system. The modulator presented its first resonance frequency at 16.7 Hz, this value was in good agreement with that predicted by a second order model, which showed a resonant frequency of 16.8 Hz. The linearity of the velocity signal of the modulator was analyzed through an optical method, based on a Michelson–Morley interferometer, in which the modulator moved one of the mirrors. Results showed a satisfactory linearity of the velocity signal obtained in the sensing coil, whose correlation with a straight line was around 0.99987 for a triangular reference waveform.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kankeleit, E.: Feedback in electromechanical drive system. Mössbauer Eff. Methodol. 1, 47 (1965)
Casas, L.L., Molins, E., Roig, A.: Miniaturization of a Mössbauer spectrometer using a piezotransducer and a solid state detector. Hyperfine Interact. 141/142, 125 (2002)
Austin Science Associates, Inc, A.S.A Mössbauer spectrometer: K-3 linear motor, instruction manual. Austin, TX (1997)
Wissel. Mössbauer driving system 260: Instruction Manual. Germany (1996)
Górnicki, R., Blachowski, A., Ruebenbauer, K.: In: Proceedings Nukleonika, vol. 52(1), p. S7 (2007)
Klingelhöfer, G., Bernhardt, B., Foh, J., Bonnes, U., Rodionov, D., De Souza, P.A., Schröder, Ch., Gellert, R., Kane, S., Gütlich, P., Kankeleit, E.: The miniaturized Mössbauer spectrometer MIMOS II for extraterrestrial and outdoor terrestrial applications: a status report. Hyperfine Interact. 144/145, 371 (2002)
Yadagiri Reddy, P., Narayan Reddy, P., Seshakumari, Ch., Rama Reddy, K.: On the transducer function of an electromechanical transducer an application to the Mössbauer velocity drive. Nucl. Instrum. Methods. 213, 381–385 (1983)
Herbst, J.F., Croat, J.J.: Neodymium–iron–boron permanent magnets. J. Magn. Magn. Mater. 100, 57 (1991)
Jianming, J.: The Finite Element Method in Electromagnetics. Wiley, New York (1993)
COMSOL: COMSOL Multiphysics, AC/DC Module User’s Guide, Version 3.5: http://www.ewp.rpi.edu/hartford/~lemcon/Comsol_terminalvelocity.pdf. Accessed 10 Feb 2010
Kwater, M.: Laser calibration of the Mössbauer spectrometer velocity: improvements in design. Hyperfine Interact. 116, 53 (1998)
Yoshimura, T., Syoji, Y., Wakabayashi, N.: Absolute velocity control of a Mössbauer spectrometer by utilizing a laser interferometer. J. Phys. E: Sci. Instrum. 10, 829–833 (1977)
Player, M.A., Wodhams, FWD.: An improved interferometric calibrator for Mössbauer spectrometer drive systems. J. Phys. E: Sci. Instrum. 9, 1148 (1976)
Vandenberghe, R.E.: Mössbauer Spectroscopy and Applications in Geology. International Training Centre for Post-Graduate Soil Scientists, p. 25. State University Gent, Belgium (1990)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Velásquez, A.A., Carmona, A., Velásquez, D. et al. Design and construction of an electromechanical velocity modulator for Mössbauer spectroscopy. Hyperfine Interact 202, 63–71 (2011). https://doi.org/10.1007/s10751-011-0339-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10751-011-0339-z