Correction to: Burning Behavior Analysis in Meso and Large-Scale Oil Slick Fires With and Without Waves Using Outdoor Gas Emission Sampling (OGES) System

1 Correction to: Fire Technology https://doi.org/10.1007/s10694-022-01234-1

In the PDF of this article, the labelling to the table 3, 4, 5, 6 and equation 1 in the article is incorrect and should have been the following information. The original article PDF has now been corrected.

2 Table 3

The labels in this table are all over the place and are not properly aligned with the appropriate columns.

Table 3 Summary of Combustion Product Concentrations Measured at 2.8 m Above Pool Surface

3 Corrected Table 3

4 Table 4

The labels such as Initial thickness, Wave number, and Peak/Avg produced CO2 are all taking up multiple rows, which makes it aesthetically unpleasing to read.

Table 4 Summary of Combustion Product Concentrations Measured by OGES Crane

5 Correct Table 4

6 Table 5

The terms are presented incorrectly. The division sign is missing, and the dot is not above the Q. 2/5/zQ^·.

6.1 Error

Table 5 Summary of Mass Flow Rate Correlations for a Buoyant Diffusion Flame from McCaffrey [14]

6.2 Correct

7 Table 6

Similar to Table 5, the terms are presented incorrectly. The division sign is missing, and the dot is not above the Q. Additionally, the units for the values under k are presented incorrectly. The s is appearing after the parentheses. There are multiplication signs appearing after the parentheses, and the superscript over m and kW are reversed in the last row. Please see the Correct portion for the proper units and values. 2/5/zQ^·.

7.1 Error

Table 6 Summary of Centerline Constants for a Buoyant Diffusion Flame from McCaffrey [14]

7.2 Correct

Eqn. (1)

The 2 in CO2 should be subscript, like CO₂.

7.3 Error

$$ MCE = \frac{CO2}{{CO2 + CO}} $$

(1)

7.4 Correct (2 should be subscript)

$$MCE = \frac{CO_{2}}{{CO_{2} + CO}}$$

(1)