Abstract
We develop an urban canopy scheme coupled to a mesoscale atmospheric numerical model and evaluate the simulated climate of an Australian city. The urban canopy scheme is based on the Town Energy Budget approach, but is modified to efficiently represent the predominately suburban component of Australian cities in regional climate simulations. Energy conservation is improved by adding a simple model of air-conditioning to prevent the urban parametrization acting as an energy sink during the Australian summer. In-canyon vegetation for suburban areas is represented by a big-leaf model, but with a largely reduced set of prognostic variables compared to previous approaches. Although we have used a recirculation/venting based parametrization of in-canyon turbulent heat fluxes that employs two canyon wall energy budgets, we avoid using a fixed canyon orientation by averaging the canyon fluxes after integrating over 180° of possible canyon orientations. The urban canopy scheme is evaluated by simulating the climate for Melbourne, Australia after coupling it to The Air Pollution Model. The combined system was found to predict a realistic climatology of air temperatures and winds when compared with observations from Environmental Protection Authority monitoring stations. The model also produced a plausible partitioning of the urban energy budget when compared to urban flux-tower studies. Overall, the urban canyon parametrization appears to have reasonable potential for studying present and predicting changes in future Australian urban climates in regional climate simulations.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Coutts A, Beringer J, Tapper N (2007) Impact of increasing urban density on local climate: Spatial and temporal variations in the surface energy balance in Melbourne, Australia. J Appl Meteorol 46: 477–493
Davies H (1976) A lateral boundary formulation for multi-level prediction models. Q J Roy Meteorol Soc 102: 405–418
Douville H, Royer JF, Mahfouf JF (1995) A new snow parameterization for the meteo-france climate model—part I: validation in stand-alone experiments. Clim Dyn 12: 21–35
Dyer A, Hicks B (1970) Flux–gradient relationships in the constant flux layer. Q J Roy Meteorol Soc 96: 715–721
Fortuniak K (2008) Numerical estimation of the effective albedo of an urban canyon. Theor Appl Climatol 91: 245–258
Harman I, Belcher S (2006) The surface energy balance and boundary layer over urban street canyons. Q J Roy Meteorol Soc 132: 2749–2768
Harman I, Barlow J, Belcher S (2004a) Scalar fluxes from urban street canyons. Part II: model. Boundary-Layer Meteorol 113: 387–409
Harman IN, Best MJ, Belcher SE (2004b) Radiative exchange in an urban street canyon. Boundary-Layer Meteorol 110: 301–316
Hurley P (2007) Modelling mean and turbulence fields in the dry convective boundary layer with the eddy-diffusivity/mass-flux approach. Boundary-Layer Meteorol 125: 525–526
Hurley P, Luhar A (2009) Modelling the meteorology at the Cabauw Tower for 2005. Boundary-Layer Meteorol 132: 43–57
Hurley P, Physick W, Luhar A (2005) TAPM—a practical approach to prognostic meteorological and air pollution modelling. Environ Model Softw 20: 737–752
Jacob DJ, Winner DA (2009) Effect of climate change on air quality. Atmos Environ 43: 51–63
Kanda M, Kawai T, Kanega M, Moriwaki R, Narita K, Hagishima A (2005) A simple energy balance model for regular building arrays. Boundary-Layer Meteorol 116: 423–443
Kanda M, Kanega M, Kawai T, Moriwaki R (2007) Roughness lengths for momentum and heat derived from outdoor urban scale models. J Appl Meteorol 46: 1067–1079
Kowalczyk EA, Garratt JR, Krummel PB (1994) Implementation of a soil-canopy scheme into the CSIRO GCM—regional aspects of the model response. CSIRO Division of Atmospheric Research Technical Paper 32, 65 pp
Kusaka H, Kondo H, Kikegawa Y, Kimura F (2001) A simple single-layer urban canopy model for atmospheric models: comparison with multi-layer and slab models. Boundary-Layer Meteorol 101: 329–358
Lee SH, Park SU (2008) A vegetated urban canopy model for meteorological and environmental modelling. Boundary-Layer Meteorol 126: 73–102
Martilli A, Clappier A, Rotach M (2002) An urban surface exchange parameterisation for mesoscale models. Boundary-Layer Meteorol 104: 261–304
Masson V (2000) A physically-based scheme for the urban energy budget in atmospheric models. Boundary-Layer Meteorol 94: 357–397
Masson V, Champeaux JL, Chauvin F, Meriguet C, Lacaze R (2003) A global database of land surface parameters at 1-km resolution in meteorological and climate models. J Clim 16: 1261–1282
Noilhan J (1981) A model for the net total radiation flux at the surface of a building. Build Environ 16: 259–266
Ohashi Y, Genchi Y, Kondo H, Kikegawa Y, Yoshikado H, Hirano Y (2007) Influence of air-conditioning waste heat on air temperature in Tokyo during summer: numerical experiments using an urban canopy model coupled with a building energy model. J Appl Meteorol 46: 66–81
Oke TR (1988) The urban energy balance. Prog Phys Geogr 12: 471–508
Sailor DJ (2001) Relating residential and commercial sector electricity loads to climate-evaluating state level sensitivities and vulnerabilities. Energy 26: 645–657
Voogt J, Grimmond C (2000) Modelling surface sensible heat flux using surface radiative temperatures in a simple urban area. J Appl Meteorol 39: 1679–1699
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Thatcher, M., Hurley, P. Simulating Australian Urban Climate in a Mesoscale Atmospheric Numerical Model. Boundary-Layer Meteorol 142, 149–175 (2012). https://doi.org/10.1007/s10546-011-9663-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10546-011-9663-8