Abstract
Mechanical bending treatment was employed to cause tension wood formation in the stem of the fast-growing yellow poplar. The tension wood induced by mechanical bending had many characteristic features of tension wood, i.e., eccentric growth toward tension wood, increased frequency of fiber cell types, vessels with reduced size, and reduced lignin content in the developed xylem. The significant reduction of the guaiacyl (G) and p-hydroxyphenyl (H) units of lignin in the tension wood was clearly visualized in samples that had been subjected to bending for 7 and 14 days when analyzed by lignin histochemical analysis using phloroglucinol-HCl. The syringyl (S) unit in the tension wood lignin was also significantly decreased in the developed xylem of the 14-day bending treatment sample, as indicated by Mäule’s staining. Expression analysis of several representative genes in the lignin biosynthetic pathway clearly demonstrated that the overall phenylpropanoid pathway toward biosynthesis for both the lignin monomers and the flavonoids was greatly downregulated on bending treatment. In addition, the genes encoding laccases, which have been reported to be involved in the polymerization of monolignols to produce lignin macromolecules, were significantly downregulated in the tension wood. Despite the very limited sequence information for the genes/enzymes in the phenylpropanoid pathway in yellow poplar, histochemical staining and expression analysis using quantitative real-time reverse transcription-polymerase chain reaction (RT-PCR) successfully demonstrated the anatomical and chemical characteristics associated with mechanical bending-induced tension wood formation in the yellow poplar.
Article PDF
Similar content being viewed by others
References
Timell TE (1986) Compression wood in gymnosperms. Springer-Verlag, Berlin, pp 1338
Kwon M (2000) Lignan biosynthesis: implications for cell wall lignifications and secondary xylem formation in woody plants. PhD thesis, Washington State University, p 246
Scurfield G (1973) Reaction wood: its structure and function. Science 179:647–655
Wardrop AB, Dadswell HE (1955) The nature of reaction wood IV. Variations in cell wall organization of tension wood fibres. Aust J Bot 3:177–189
Côté JWA, Day AC, Timell TE (1969) A contribution to the ultrastructure of tension wood fibers. Wood Sci Technol 3:257–271
Joseleau JP, Faix O, Kuroda K, Ruel K (2004) A polyclonal antibody directed against syringylpropane epitopes of native lignins. C R Biol 327:809–815
Mia AJ (1968) Organization of tension wood fibers with special reference to the gelatinous layer in Populus tremuloides Michx. Wood Sci 1:105–115
Ragauskas AJ, Williams CK, Davison BH, Britovsek G, Cairney J, Eckert CA, Frederick WJ Jr, Hallett JP, Leak DJ, Liotta CL, Mielenz JR, Murphy R, Templer R, Tschaplinski T (2006) The path forward for biofuel and biomaterials. Science 311:484–489
Chen F, Dixon RA (2007) Lignin modification improves fermentable sugar yields for biofuel production. Nat Biotechnol 25: 759–761
Liang H, Fang EG, Tomkins JP, Luo M, Kudrna D, Kim HR, Arumuganathan K, Zhao S, Leebens-Mack J, Schlarbaum SE, Banks JA, dePamphilis CW, Mandoli DF, Wing RA, Carlson JE (2007) Development of a BAC library for yellow poplar (Liriodendron tulipifera) and the identification of genes associated with flower development and lignin biosynthesis. Tree Genet Genom 3:215–225
Yoshida M, Ohta H, Yamamoto H, Okuyama T (2002) Tensile growth stress and lignin distribution in the cell walls of yellow poplar, Liriodendron tulipifera Linn. Trees 16:457–464
Krishnamurthy KV (1999) Methods in cell wall cytochemistry. CRC Press, Boca Raton, pp 115–123
Chang S, Puryear J, Cairney J (1993) A simple and efficient method for isolating RNA from pine trees. Plant Molec Biol Rep 11:113–116
Livak KJ, Schmittgen TD (2001) Analysis of relative gene expression data using real-time quantitative PCR and the 2-ΔΔCT method. Methods 25:402–408
Kwon M (2008) Tension wood as a model system to explore the carbon partitioning between lignin and cellulose biosynthesis in woody plants. J Appl Biol Chem 51:83–87
Westing AH (1968) Formation and function of compression wood in gymnosperms II. Bot Rev 34:51–78
Paux E, Carocha V, Marques C, Mendes de Sousa A, Borralho N, Sivadon P, Grima-Pettenati J (2005) Transcript profiling of Eucalyptus xylem genes during tension wood formation. New Phytol 167:89–100
Funada R, Miura T, Shimizu Y, Kinase T, Nakaba S, Kubo T, Sano Y (2008) Gibberellin-induced formation of tension wood in angiosperm trees. Planta 227:1409–1414
Pilate G, Chabbert B, Cathala B, Yoshinaga A, Leple JC, Laurans F, Lapierre C, Ruel K (2004) Lignification and tension wood. C R Biol 327:889–901
Katayama T, Ogaki A (2001) Biosynthesis of (+)-syringaresinol in Liriodendron tulipifera I: feeding experiments with L-[U-14C] phenylalanine and [8.14C] sinapyl alcohol. J Wood Sci 47:41–47
Anterola AM, Jeon JH, Davin LB, Lewis NG (2002) Transcriptional control of monolignol biosynthesis in Pinus taeda: factors affecting monolignol ratios and carbon allocation in phenylpropanoid metabolism. J Biol Chem 277:18272–18280
Higuchi T (2006) Look back over the studies of lignin biochemistry. J Wood Sci 52:2–8
Davin LB, Wang HB, Crowell AL, Bedgar DL, Martin DM, Sarkanen S, Lewis NG (1997) Stereoselective bimolecular phenoxy radical coupling by an auxiliary (dirigent) protein without an active center. Science 275:362–366
LaFayette PR, Eriksson KEL, Dean FD (1999) Characterization and heterologous expression of laccase cDNAs from xylem tissues of yellow-poplar (Liriodendron tulipifera). Plant Mol Biol 40:23–35
Anterola AM, Lewis NG (2002) Trends in lignin modification: a comprehensive analysis of the effects of genetic manipulations/mutations on lignification and vascular integrity. Phytochemistry 61:221–294
Author information
Authors and Affiliations
Corresponding author
About this article
Cite this article
Jin, H., Kwon, M. Mechanical bending-induced tension wood formation with reduced lignin biosynthesis in Liriodendron tulipifera . J Wood Sci 55, 401–408 (2009). https://doi.org/10.1007/s10086-009-1053-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10086-009-1053-1