Avoid common mistakes on your manuscript.
Erratum to:
Forsch Ingenieurwes 2021
The unreinforced plastic gear indicates a minimum lubricant film thickness hmin = 0.39 µm and a specific lubricant film thickness of λ = 1.6 for the herein investigated operating conditions. The fiber reinforced variant, however, exhibits a minimum lubricant film thickness hmin = 0.28 µm and a specific lubricant film thickness of λ = 0.6. Due to the higher roughness and the resulting low specific lubricant film thickness, the carbon fiber reinforced test gears may be more sensitive to wear in operation than the non-reinforced variants of lower roughness.
The original article has been corrected.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Illenberger, C.M., Tobie, T. & Stahl, K. Erratum to: Operating behavior and performance of oil-lubricated plastic gears. Forsch Ingenieurwes 86, 567 (2022). https://doi.org/10.1007/s10010-021-00559-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10010-021-00559-7