Abstract
We present realistic calculations of thermal lensing in edge-pumped, Yb3+ doped yttrium aluminum garnet (YAG), slab lasers for both straight-through and zigzag propagation. Using ray tracing and finite element analysis we simulate the distributions of absorbed pump power, temperature, and stress. From these results we numerically calculate the induced lensing due to thermal and stress gradients. Effects on induced lensing of gaps in the diode pump source array and due to bonding undoped host crystal to the slab edges are presented.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Koechner W (1999) Solid-State Laser Engineering. Fifth Revised and Updated Edition. ISBN 3-540-65064-4 Springer, New York
Chen B, Dong J, Patel MKR, Chen Y, Kar A, Bass M (2003) Proc. SPIE 4968:1
Chen Y, Chen B, Patel MKR, Bass M (2004) IEEE J. Quantum Electron. QE-40:909
Chen Y, Chen B, Patel MKR, Kar A, Bass M (2004) IEEE J. Quantum Electron. QE-40:917
Graf T, Wyss E, Weber HP (2001) Proc. ASSL 2001 50:688
Rutherford TS, Tulloch WM, Sinha S, Byer RL (2001) Opt. Lett. 26:986
ASAP optical modeling software by Breault Research. See www.breault.com
A Finite Element Analysis software by COMSOL. See www.comsol.com
Fan TY (1993) IEEE J. Quantum Electron. QE-29:1457
Rutherford TS (2001) Ph.D. dissertation, Stanford Univ., Stanford, CA
Eggleston JM, Kane TJ, Kuhn K, Unternahrer J, Byer RL (1984) IEEE J. Quantum Electron. QE-20:289
Martin WS, Chernoch JP, US Patent 3,6331,126 (January 1972)
Chen Y, Chen B, Bass M (2005) Appl. Phys. B 81:75
Chen Y, Chung TY, Bass M, 18th Ann. Solid State and Diode Laser Tech. Rev., Paper SS2-3, Directed Energy Prof. Soc., June 7–9, 2005, Los Angeles, CA
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
42.55.Rz; 42.55.Wd; 42.60.Lh
Rights and permissions
About this article
Cite this article
Chen, B., Chen, Y., Simmons, J. et al. Thermal Lensing of Edge-pumped Slab Lasers-I. Appl. Phys. B 82, 413–418 (2006). https://doi.org/10.1007/s00340-005-2089-6
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00340-005-2089-6