Abstract
Servo presses have been very popular in engineering applications due to their flexibility, simplicity in construction, and easy control. Many press manufacturer and researchers have studied on servo presses by developing different prototypes. However, only a few models have been commercially available in the market. Servo crank presses can generate different types of motion in their design limitations. They can present wide range of solutions to manufacturers. In this study, a dynamic model is derived by Lagrange approach for a servo crank press machine tool. A load capacity of 50 tons and stroke capacity of 200 mm prototype is designed and manufactured. A new motor-reducer selection methodology is suggested for servo presses. Servo motor-reducer combination is selected. Dynamic model and simulation results are presented with the real system parameters. Experimental validations have been performed on the servo press prototype. System’s dynamic model is validated by the experimental results. High precision of the manufactured servo press is also shown.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Osakada K, Mori K, Altan T, Groche P (2011) Mechanical servo press technology for metal forming. CIRP Ann Manuf Technol 60(2):651–672. doi:10.1016/j.cirp.2011.05.007
Hayashi H, Nishimura H (2009) The application of servo press machine to forming of sheet metals with low formability. The Annals of “Dunarea De Jos” University of Galati Fascicle V, Technologies in Machine Building, ISSN1221-4566
Halicioglu R, L.C. D (2013) Krank Pres Mekanizması: Kinematik Analizi ve Benzetimi. Paper presented at the UMTS, Erzurum
Halicioglu R, Dulger LC, Bozdana AT (2014) Modelling and simulation based on MATLAB/Simulink: a press mechanism. Paper presented at the Journal of Physics: Conference Series
Halicioglu R, Dulger LC, Bozdana AT (2016) Mechanisms, classifications, and applications of servo presses: a review with comparisons. Proceedings of the institution of mechanical engineers. part B. Journal of Engineering Manufacture 230(7):1177–1194. doi: 10.1177/0954405415600013
Qingyu S, Baofeng G, Jian L (2013) Drawing motion profile planning and optimizing for heavy servo press. Int J Adv Manuf Technol 69(9–12):2819–2831
Fung RF, Chen KW (1998) Dynamic analysis and vibration control of a flexible slider–crank mechanism using PM synchronous servo motor drive. J Sound Vib 214(4):605–637. doi:10.1006/jsvi.1998.1556
Ha J-L, Fung R-F, Chen K-Y, Hsien S-C (2006) Dynamic modeling and identification of a slider-crank mechanism. J Sound Vib 289(4):1019–1044
Bai J, Tong S, Yu Z, Zheng D (2010) Analysis and simulations of inertia force in ultra high speed stamping machine. Journal of Networks 5(12):1475–1480
He K, Li W, Du R (2006) Dynamic modelling with kineto-static method and experiment validation of a novel controllable mechanical metal forming press. Int J Manuf Res 1(3):354–378
Li H, Zhang Y, Zheng H (2008) Dynamics modeling and simulation of a new nine-bar press with hybrid-driven mechanism. J Mech Sci Technol 22(12):2436–2444
Li H, Zhang Y (2010) Seven-bar mechanical press with hybrid-driven mechanism for deep drawing; part 1: kinematics analysis and optimum design. J Mech Sci Technol 24(11):2153–2160
Jun L (2006) A study of the dynamic of slider-crank mechanism. Journal of Shanghai Dianji University 9(4):24–28
Xingguo M, Xiaomei Y, Bangchun W (2007) Multi-body dynamics simulation on flexible crankshaft system. In: Proceeding of the 12th IFToMM World Congress, Besancon, France, 18th–21st June 2007
Liu, M, Cao, Y, Zhang, Q, Zhou, H (2010) Kinematics and dynamics simulation of the slider-crank mechanism based on MATLAB/Simulink. In: Computer Application and System Modeling (ICCASM), International Conference on 2010:V9–557-V559–563. IEEE
Daniel GB, Cavalca KL (2011) Analysis of the dynamics of a slider–crank mechanism with hydrodynamic lubrication in the connecting rod–slider joint clearance. Mech Mach Theory 46(10):1434–1452. doi:10.1016/j.mechmachtheory.2011.05.007
Abdullah MN, Telegin VV (2011) Modeling of dynamic processes of the main executive mechanism of the hot-crank press. Al-Rafadain Engineering Journal 19(4):1–10
Anis A (2012) Simulation of slider crank mechanism using ADAMS software. International Journal of Engineering & Technology 12(4):108–112
Endou J (2008) Innovation of press working by servo press. Journal-Japan Society for Technology of Plasticity 49(2):4
Aida (2012) Catalog Of Aida; AIDA Direct Servo Formers DSF-N1 and N2 Series. In: Web; http://www.aida.co.jp/en/products/product12.html
Siemens, AG (2008) Spectrum metal forming. pp. 12–17
Coskunoz (2012) Coskunoz metal form. Bursa/Turkey
Karakoc (2014) KLP Machine Group Press Catalog
Baumueller (2014) DST2 high torque servo motors catalog. Nürnberg
Amada Catalog of AE-NT and EM-NT series. Amada America Inc
Amada (2010) Catalog of SDE series. Amada GMBH, Germany
Seyi (2012) Catalog of SD1-SD2 series. Seyi Europe GmbH
Komatsu (2013) Catalog of H1F-H2W series. Komatsu America Industries LLC, Ilinois
Kütük ME (2013) Hybrid machine systems: analysis and control. Msc, Gaziantep University
Ginsberg J (2008) Engineering dynamics, vol. 10. Cambridge University Press
Halicioglu R, Dulger LC, Bozdana AT (2016) Structural design and analysis of a servo crank press. Engineering Science and Technology, an International Journal 19(4):2060–2072. doi:10.1016/j.jestch.2016.08.008
Bulatović ŽM, Tomić M, Knežević D, Cvetić M (2011) Evaluation of variable mass moment of inertia of the piston–crank mechanism of an internal combustion engine. Proceedings of the Institution of Mechanical Engineers, part D. Journal of Automobile Engineering 225(5):687–702
Kissell, TE (2003) Industrial electronics: applications for programmable controllers, instrumentation and process control, and electrical machines and motor controls. Prentice Hall
Boerger D (2003) Servo technology meets mechanical presses. Stamping Journal:32
Parker (1997) ZX/ZXF Indexer Drive User Guide. Compumotor Division Parker Hannifin Corporation
GEIndustrialSystems hand book: AC Motor Selection and Application Guide, vol. GET-6812C. Indiana
Mazurkiewicz J (2002) Load inertia and motor selection. Motion Control Association
Cetinkunt S (2007) Mechatronics. Wiley, USA
Roos F, Johansson H, Wikander J (2006) Optimal selection of motor and gearhead in mechatronic applications. Mechatronics 16(1):63–72
Budimir M, Meyer S (2014) Motor selection & gearbox matching. Groschopp-TechTips. http://s3.amazonaws.com/2013_pdfs/Groschopp/Groschopp-Tech-Tip.pdf
SEW (2002) Product catalog of SEW eurodrive: varigear variable speed drives. vol. 9PD0008/2002. Sew-Eurodrive Inc., USA
Parker (2012) Parker MB/MH Series Servo Motors Catalog. Parker Hannifin Corporation
SEW-eurodrive (2009) Servo gear units of SEW catalog and webside. SEW eurodrive-driving the world, Bruchsal/Germany
Beckhoff. http://www.beckhoff.com.tr/english.asp?twincat/. Accessed 29 June
Halicioglu R (2015) Design, synthesis and control of a mechanical servo press: an industrial application. PhD, Gaziantep University
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Funding
This work was supported by the Ministry of Science, Industry and Technology under SANTEZ project (01422.STZ.2012-I), Turkey.
Rights and permissions
About this article
Cite this article
Halicioglu, R., Canan Dulger, L. & Tolga Bozdana, A. Modeling, design, and implementation of a servo press for metal-forming application. Int J Adv Manuf Technol 91, 2689–2700 (2017). https://doi.org/10.1007/s00170-016-9947-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9947-8