Article PDF
Avoid common mistakes on your manuscript.
References
Bažant, Z. P. and Baweja, S., ‘Creep and shrinkage prediction model for analysis and design of concrete structures-Model B3’, Published as a draft RILEM recommendation inMater. and Struct. 28 (1995), 357–365, 415–430, 488–495, with Errata in29 (1996) 126.
Bažant, Z. P. and Baweja, S., ‘Creep and shrinkage prediction model for analysis and design of concrete structures’, Report by ACI committee 209 subcommittee 2 (1995).
Bažant, Z. P. and Chem, J.-C., ‘Log-double power law for concrete creep’,Am. Concrete Inst. Journal 82 (1985) 665–675.
ACI committee 209, ‘Prediction of creep, shrinkage and temperature effects in concrete structures’, (ACI 209-82) (American Concrete Institute, Detroit, 1982) 108 pp.
CEB-FIP Model Code (1990), Design Code (Thomas Telford, London).
Gardner, N.J. and Zhao, J.W., ‘Creep and shrinkage revisited’,ACI Materials Journal,90 (1993) 236–246. Discussion by Bažant and Baweja,ACI Materials Journal 91 (1994) 204–216.
RILEM TC-107, ‘Guidelines for characterising concrete creep and shrinkage in structural design codes or recommendations’,Mater. and Struct. 28 (1995) 52–55.
Bažant, Z. P., Ed., ‘Mathematical Modeling of Creep and Shrinkage of Concrete’, (John Wiley and Sons, Chichester and New York, 1988).
Neville, A.M., Dilger, W.H. and Brooks, J.J. ‘Creep of Plain and Structural Concrete’, (Construction Press, London and New York, 1983).
Bažant, Z. P., ‘Prediction of concrete creep effects using ageadjusted effective modulus method’,American Concrete Institute Journal 69 (1972) 212–217.
Bažant, Z. P. and Panula, L., ‘Practical prediction of time dependent deformations of concrete’, Parts I–VI,Mater. and Struct. 11 (1978) 307–316, 317–328, 425–434,12 (1979), 169–183.
Bažant, Z. P., Kim, Joong-Koo and Panula, L., ‘Improved prediction model for time dependent deformations of concrete’, Part 1—Shrinkage,Mater. and Struct. 24 (1991) 327–345, Part 2—Basic creep, ibid.Mater. and Struct. 24 (1991) 409–42, Part 3—Creep at drying, ibid.Mater. and Struct. 25 (1992), 21–28, Part 4—Temperature effects, ibid.Mater. and Struct. 25 (1992) 84–94, Part 5—Cyclic load and cylic humidity, ibid.Mater. and Struct. 25 (1992) 163–169.
Bažant, Z. P. and Liu, K.-L., ‘Random creep and shrinkage in structures: Sampling’,J. of Structural Engrg. ASCE111 (1985) 1113–1134.
Author information
Authors and Affiliations
Additional information
TC Membership: Chairman: Zdeněk P. Bažant, USA;Secretary: Bernard Espion, Belgium;Members: Paul Acker France; Michel Auperin, France; Ignacio Carol, Spain; Domingo Carreira, USA; José M. R. Catarino, Portugal; Jenn-Chuan Chern, Taiwan; Mario Chirino, Italy; John W. Dougill, UK; Christian Huet, Switzerland; Jan Erik Jonasson, Sweden; Jin-Keun Kim, Korea; Vladimir Kristek Czech Republic; Harald S. Muller, Germany; Byung-Hwan Oh, Korea; Josko Ozbolt, Germany; Stuart G. Ried, Australia; Hans Reinhardt, Germany; Peter Schwesinger, Germany; Bretislav Teply, Czech Republic; Heinrich Trost, Germany; Tatsuya Tsubaki, Japan; Robert F. Warner, Australia; Folker H. Wittmann, Switzerland; J. Francis Young, USA.
Note: A potential user of model B3 should note the Errata mentionned in reference [1].
Rights and permissions
About this article
Cite this article
Bažant, Z.P., Baweja, S. Short form of creep and shrinkage prediction model B3 for structures of medium sensitivity. Mat. Struct. 29, 587–593 (1996). https://doi.org/10.1007/BF02485965
Issue Date:
DOI: https://doi.org/10.1007/BF02485965