Article PDF
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
J. R. YANG and H. K. D. H. BHADESHIA, in “Advances in welding and technology”, edited by S. A. David (ASM, Ohio, 1987) p. 187.
J. Mater. Sci. 26 (1991) 839.
J. R. YANG, C. C. YANG and C. Y. HUANG, J. Mater. Sci. Lett. in press.
R. A. FARRAR and P. L. HARRISON, J. Mater. Sci. 22 (1987) 3812.
D. J. ABSON and R. J. PARGETER, Int. Met. Rev. 31 (1986) 141.
R. E. DOLBY, Met. Technol. 10 (1983) 349.
J. H. TWEED and J. F. KNOTT, Met. Sci. 17 (1983) 45.
T. SAWAMURA, T. HASHIMOTO, Y. KOMIZO and Y. YAMAGUCHI, Sumitomo Met. 37 (1985) 57.
M. PONTREMOLI, P. BUFALIN, A. APRILE and C. JANNONE, Met. Technol. 11 (1984) 504.
H. K. D. H. BHADESHIA, “Steel Technology International 1989” (Sterling Publications International Ltd, London, 1989) p. 289.
D. V. EDMONDS and R. C. COCHRANE, Met. Trans., A21 (1990) 1527.
S. P. CANNING et al. (editors), “1991 annual book of ASTM standards”, Section 3, Volume 03.01 (ASTM, Philadelphia, 1991) p. 197.
S. MATSUDA, T. INOUE, H. MIMURA and Y. OKAMURA, Trans. Iron Steel Inst. Jpn 12 (1972) 325.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yang, J.R., Huang, C.Y., Huang, C.F. et al. Influence of acicular ferrite and bainite microstructures on toughness for an ultra-low-carbon alloy steel weld metal. J Mater Sci Lett 12, 1290–1293 (1993). https://doi.org/10.1007/BF00506341
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00506341