Abstract
The major waste product of the alkaline extraction of alumina from bauxite (Bayer Process) is known as red mud. Approximately one ton of red mud is produced for every two tons of bauxite mined. The red mud produced from Jamaican bauxite is rich in hematite, alumina and titanium oxide. It has been shown that more than 90% (by weight) alumina can be recovered from red mud by soda ash sintering and caustic leaching. Hematite can be carbothermically reduced with a degree of metallization of more than 94%, resulting in attempts for magnetic separation. These separations are desirable because there are no waste products generated. Consequently, there is an opportunity for complete utilization of the waste material. Conversely, the preseparated material could be charged through the tuyeres in an iron blast furnace, or it could be smelted to produce pig iron. If smelted, the concentration of titanium oxide in the slag would be high enough to justify its recovery by an established acid-leach process. This paper describes the results of alumina recovery and the plans for titanium oxide recovery from red-mud. In addition, the situation of ongoing efforts in iron extraction, particularly, the method of magnetic separation of the reduced material. The problems associated with the use of reduced red mud as an alternative to direct-reduced iron (DRI) is also discussed. A critical assessment of the recovery sequence chosen for the products is described based on economics.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Agency of Ind. Sci. Tech., 1997, J Patent No. 52152896-A.
Baetz, H.B., and Lightboume, R.C., 1972, US Patent No. 3690828.
Bodsworth, C., and Bell, H.B., 1972, Physical Chemistry of Iron and Steel Manufacture, 2nd Ed., Longman Group Ltd., London, England.
Braithwait, M., 1982, GB Patent No. 2078211-A.
Cresswell, P.J., and Milne, D.J., 1981, AU Patent No. 88102.
Dakatos, T., Miskei, M., and Szolnoki, J., 1978, DE Patent No. 2747436.
Fursman, O.C., Mauser, J.E., Butler, M.O., and Stickney, W.A., 1970, “Utilization of Red Mud Residues From Alumina Production,” US Bureau of Mines Report of Investigations 7454.
Guccione, E., 1971, “Red mud, a solid waste, can now be converted to high-quality steel,” Eng. Min. J 172(9), pp. 136–138.
Jacob, Jr., L., 1984, “Bauxite: Proceedings of the 1984 Bauxite Symposium, Los Angeles, California, Society of Mining Engineers of American Institute of Mining, Metallurgical, and Petroleum Engineers, New York, N.Y., pp. 349–369.
Piga, L., Pochetti, F., and Stoppa, L., 1993, “Recovering metals from red mud generated during alumina production,” JOM 45, (11), pp. 55–59.
Vachon, P., Tyagi, R., Auclair, J-C., and Wilkinson, K.J., 1994, “Chemical and biological leaching of aluminum from red mud,” Environ. Sci. Technol., Vol. 28, No. 1, pp. 26–30.
Vereinigle Aluminium-Werke, 1971, FR Patent No. 2117930-A.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mishra, B., Staley, A. & Kirkpatrick, D. Recovery of value-added products from red mud. Mining, Metallurgy & Exploration 19, 87–94 (2002). https://doi.org/10.1007/BF03403261
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF03403261