Abstract
Literature describing the microstructure of austenitic-ferritic stainless steels is reviewed, including phases which can be deleterious, such as σ and ά. The mechanical properties and corrosion resistance of Carpenter Technology’s 7-Mo PLUSsr stainless (UNS S32950) demonstrate the resistance of this material to the formation of these phases and their deleterious effects. This material was evaluated in the annealed and welded conditions and after extended thermal treatments to simulate boiler and pressure vessel service.
Similar content being viewed by others
References
H.D. Solomon and T.M. Devine, Jr., “Duplex Stainless Steels—A Tale of Two Phases,” Duplex Stainless Steels, ed. R.A. Lula, (Metals Park, OH: ASM, 1983), pp. 693–756.
L.H. Flasche, “Weldability of Ferralium Alloy 255,” Duplex Stainless Steels (Metals Park, OH: ASM, 1983), pp. 553–572.
F.G.E. Beetge and F.P.A. Robinson, “Formation of Sigma Phase in 26 Cr: 6Ni Stainless Steel,” Metals and Materials, 7 (9) (1973), pp. 408–413.
H.D. Solomon and T.M. Devine, “Influence of Microstructure on the Mechanical Properties of Localized Corrosion Resistance of a Duplex Stainless Steel,” MiCon 78: Optimization of Processing, Properties, and Service Performance through Microstructural Control, ed. H. Abrams et al. (Philadelphia: ASTM, 1979), pp. 430–461.
L.A. Norstrom, S. Pettersson and S. Nordin, “Sigma-Phase Embrittlement in Some Ferritic-Austenitic Stainless Steels,” Z. Werkstofftech, 12 (1981), pp. 229–234.
S. Bernhardsson, R. Mellstrom and J. Oredsson, “Properties of Two Highly Corrosion Resistant Duplex Stainless Steels” (Paper number 124 presented at NACE Corrosion/81, Toronto, Canada, 6-10 April, 1981).
A. Poznansky and P.J. Grobner, “Highly Alloyed Duplex Stainless Steels,” New Developments in Stainless Steel Technology, ed. R.A. Lula (Metals Park, OH:ASM, 1985), pp. 195–206.
Y. Maehara and Y. Ohmori, “Sigma Phase Precipitation and Hot Ductility of Delta-Ferrite/Austenite Duplex Stainless Steels,” The Sumitomo Search, 31 (Nov. 1985), pp. 147–154.
G. Herbsleb and P. Schwaab, “Precipitation of Intermetallic Compounds, Nitrides and Carbides in AF 22 Duplex Steel and Their Influence on Corrosion Behavior in Acids,” Duplex Stainless Steels, ed. R.A. Lula (Metals Park, OH: ASM, 1983), pp. 15–40.
I. von Hagen and M. Keller, “Interrelation Between Fabrication Processes and Mechanical Properties of AF 22 Duplex Steel Tubes,” Ibid., pp. 325–354.
R. Roberti and W. Nicodemi, “Sigma Phase Formation in Two-phase Austeno-Ferritic Stainless Steels,” Avesta Stainless Bulletin, 4 (1981), pp. 13–17.
Y. Maehara et al., “Effects of Alloying Elements on Sigma Phase Precipitation in Austenite-Ferrite Duplex Phase Stainless Steels,” Metals Science, 17 (11)(1983), pp. 541–547.
G.G. Kolchin et al., “Decomposition of Delta-Ferrite in High Chromium, Austenitic-Ferritic Stainless Steels Containing Nitrogen,” Steel in the USSR, 17 (5)(1987), pp. 235–236.
R.N. Wright, “Toughness of Ferritic Stainless Steels,” Toughness of Ferri tic Stainless Steels, ASTM STP 706, ed. R.A. Lula (Philadelphia: ASTM 1980), pp. 2–33.
R.F. Steigerwald, “The Effects of Metallic Second Phases in Stainless Steels,” Corrosion, 33 (9) (1977), pp. 338–343.
A. Hendry, Z.F. Mazur and KH. Jack, “Influence of Nitrogen on 475°C Embrittlement of High-Chromium Ferritic Steels,” Metal Science, 13 (Aug. 1979), pp. 482–486.
ASTM A262, “Standard Practice for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels,” 1988 Annual Book of ASTM Standards, (Philadelphia: ASTM, 1988), pp. 1–18.
ANSI/AWS B4-0-85, Standard Methods for Mechanical Testing of Welds (Miami: American Welding Society, 1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
DeBold, T.A. Duplex stainless steel—Microstructure and properties. JOM 41, 12–15 (1989). https://doi.org/10.1007/BF03220990
Issue Date:
DOI: https://doi.org/10.1007/BF03220990