Abstract
For the development of Fe−Al alloys as structural materials, a deep understanding of slip and deformation properties is necessary. In particular, since mechanical properties of the iron aluminides are affected by excess vacancy strengthening as well as the positive-temperature dependence of yield stress, controlling these strength features is essential. In this article, the strength properties of iron aluminides are reviewed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
T.B. Massalski et al., ed.,Binary Alloy Phase Diagrams, (Metals Park, OH: ASM, 1986), p. 112.
M.J. Marcinkowski and N. Brown.Acta Metall., 9 (1961), p. 764.
H.J. Leamy, F.X. Kayser, and M.J. Marcinkowski.Phil. Mag., 20 (1969), p. 779.
T. Yamagata and H. Yoshida,Mater. Sci. Eng., 12 (1973), p. 95.
P.A. Flinn,Trans. Metall. Soc. AIME, 218 (1960), p. 145.
H.J. Leamv and F.X. Kayser,Phys. Stat. Sol., 34 (1969), p. 765.
H.J. Leamy, F.X. Kayser, and M.J. Marcinkowski,Phil. Mag., 20 (1969), p. 763.
I.L.F. Ray, R.C. Crawford, and D.J.H. Cockayne,Phil. Mag., 21 (1970), p. 1027.
R.C. Crawford, I.L.F. Ray, and D.J.H. Cockayne,Phil. Mag., 27 (1973), p. 1.
R.C. Crawford and I.L.F. Ray,Phil. Mag., 35 (1977), p. 549.
Y. Umakoshi and M. Yamaguchi,Phil. Mag. A, 41 (1980), p. 573.
Y. Umakoshi and M. Yamaguchi,Phil. Mag. A, 44 (1981), p. 711.
M.G. Mendiratta, H.-M. Kim, and H.A. Lipsitt,Metall. Trans. A, 15 (1984), p. 395.
D.G. Morris, D. Peguiron, and M. Nazmy,Phil. Mag. A, 71 (1995), p. 441.
A. Ball and R.E. Smallman,Acta Metall., 14 (1966), p. 1349.
A. Ball and R.E. Smallman,Acta Metall., 14 (1966), p. 1517.
M.A. Crimp and Y. Zhang,High-Temperature Ordered Intermetallic Alloys VI, vol. 364 (Pittsburgh, PA, MRS, 1995), p. 53.
F. Král, P. Schwander, and G. Kostorz,Acta Mater., 45 (1997), p. 675.
Y.A. Chang et al.,Intermetallics, 1 (1993), p. 107.
K. Ho and R.A. Dodd,Scripta Metall., 12 (1978), p. 1055.
J.P. Neumann, Y.A. Chang, and C.M. Lee.Acta Metall., 24 (1976), p. 593.
J.P. Rivière.Mater. Res. Bull., 12 (1977), p. 995.
R. Krachler et al.Intermetallics, 3 (1995), p. 83.
R. Würschum, C. Grupp, and H.E. Schaefer,Phys. Rev. Lett., 75 (1995), p. 97.
H.E. Schaefer et al.,Phys. Rev. B, 41 (1990), p. 11869.
D. Paris and P. Lesbats,J. Nucl. Mater., 69&70 (1978), p. 628.
C.L. Fu et al.Phys. Rev. B, 48 (1993), p. 6712.
D. Paris, P. Lesbats, and J. Levy,Scripta Metall., 9 (1975), p. 1373.
K. Badura and H.E. Schaefer,Z. Metallk., 84 (1993), p. 405.
Y.A. Chang and J.P. Neumann.Prog. Solid State Chem., 14 (1982), p. 221.
P. Nagpal and I. Baker.Met. Trans. A, 21 (1990), p. 2281.
J. Rieu and C. Goux.Mém. Sci. Rev. Metall., 65 (1969), p. 869.
D. Weber et al.,J. Phys. C7, 38 (1977), p. 332.
M.A. Crimp and K. Vedula,Phil. Mag. A, 63 (1991), p. 559.
M.A. Crimp, K.M. Vedula, and D.J. Gaydosh,High-Temperature Ordered Intermetallic Alloys II, vol. 81 (Pittsburgh, PA: MRS, 1987), p. 499.
B. Schmidt, P. Nagpal, and I. Baker,High-Temperature Ordered Intermetallic Alloys III, vol. 133 (Pittsburgh PA, MRS, 1989), p. 755.
M.A. Crimp and K.M. Vedula,Mater. Sci. Eng. A, 165 (1993), p. 29.
K. Yoshimi, Y. Saeki, and S. Hanada, to be submitted.
K. Yoshimi, S. Hanada, and M.H. Yoo,Intermetallics, 4 (1996), p. 159.
J.P. Rivière, H. Zonon, and J. Grilhé,Phys. Stat. Sol. (a), 16 (1973), p. 545.
K. Yoshimi et al.Phil. Mag. A, 73 (1996), p. 443.
N. Junqua, J.C. Desoyer, and P. Moine,Phys. Stat. Sol. (a), 18 (1973), p. 387.
A. Fourdeux and P. Lesbats,Phil. Mag. A, 45 (1982), p. 81.
D.G. Morris, J.C. Loye, and M. Leboeuf,Phil. Mag. A, 69 (1994), p. 961.
P.R. Munroe,Intermetallics, 4 (1996), p. 5.
K. Yoshimi and S. Hanada, unpublished work.
C.T. Liu, C.G. McKamey, and E.H. Lee,Scripta Metall. Mater., 24 (1990), p. 385.
N.S. Stoloff and C.T. Liu.Intermetallics, 2 (1994), p. 75.
C.G. McKamey, J.A. Horton, and C.T. Liu.Scripta Metall., 22 (1988), p. 1679.
C.G. McKamey, J.A. Horton, and C.T. Liu,J. Mater. Res., 4 (1989), p. 1156.
C.T. Liu and E.P. Liu,High-Temperature Ordered Intermetallic Alloys IV, vol. 213 (Pittsburgh, PA: MRS, 1991), p. 527.
P. Nagpal and I. Baker,Scripta Metal. Mater., 25 (1991), p. 2577.
M.V. Nathal and C.T. Liu,Intermetallics, 3 (1995), p. 77.
C.H. Kong and P.R. Munroe,Processing, Properties, and Applications of Iron Aluminides, ed. J.H. Schneibel and M.A. Crimp (Warrendale, PA: TMS, 1994), p. 231.
C.H. Kong and P.R. Munroe,Scripta Metall. Mater., 30 (1994), p. 1079.
J.H. Schneibel et al.High-Temperature Ordered Intermetallic Alloys VI, vol. 364 (Pittsburgh, PA: MRS, 1995), p. 73.
D.G. Morris, M.M. Dadras, and M.A. Morris,Acta Metall. Mater., 41 (1993), p. 97.
M.G. Mendiratta et al.,Metall. Trans. A, 18 (1987), p. 283.
D.J. Gaydosh et al.,Mater. Sci. Eng. A, 150 (1992), p. 7.
K. Yoshimi, H. Terashima, and S. Hanada,Mater. Sci. Eng. A, 194 (1995), p. 53.
N.S. Stoloff and R.G. Davies,Prog. Mater. Sci., 13 (1966), p. 1.
I. Baker and P. Nagpal,Structural Intermetallics, ed. R. Darolia et al. (Warrendale, PA: TMS, 1993), p. 463.
N.S. Stoloff and R.G. Davies,Acta Metall., 12 (1964), p. 473.
K. Yoshimi, S. Hanada, and H. Tokuno,Mater. Trans., JIM, 35 (1994), p. 51.
I. Baker, and D.J. Gaydosh,Mater. Sci. Eng., 96 (1987), p. 147.
J. Guo et al.,Acta Metall. Sinica, 3 (1990), p. 249.
K.-M. Chang.Met. Trans. A, 21 (1990), p. 3027.
S. Hanada et al.,Scripta Metall., 15 (1981), p. 1345.
K. Yoshimi, S. Hanada, and M. H. Yoo,Acta Metall. Mater., 43 (1995), 4141.
G. Inden and W. Pepperhoff,Z. Metallk., 81 (1990), p. 770.
H. Xiao and I. Baker,Scripta Metall. Mater., 28 (1993), p. 1411.
J.T. Guo et al.,Scripta Metall. Mater., 29 (1993), p. 783.
O. Klein and I. Baker.Scripta Metall. Mater., 30 (1994), p. 1413.
T. Onuma, M.S. thesis, Tohoku University (1995).
N. Matsumoto, M.S. thesis, Tohoku University (1994).
R. Carleton, E.P. George, and R.H. Zee.Intermetallics, 3, (1995), p. 433.
P. Morgand, P. Mouturat, and G. Sainfort,Acta Metall., 16 (1968), p. 867.
W. Schröer, H. Mecking, and Ch. Hartig,Intermetallic Compounds, ed. O. Izumi (Sendai, Japan: JIM, 1991), p. 567.
J.W. Park, I.G. Moo, and J. Yu.J. Mater. Sci., 26 (1991), p. 3062.
H. Rösner et al.Mater. Sci. Eng. A, 192/193 (1995), p. 793.
C.G. McKamey and J.A. Horton,Met. Trans. A, 20 (1989), p. 751.
K. Yoshimi, S. Hanada, and M.H. Yoo,High Temperature Ordered Intermetallic Alloys VII (Pittsburgh, PA: MRS 1997), in press.
R.S. Diehm and D.E. Mikkola,High-Temperature Ordered Intermetallic Alloys II, vol. 81 (Pittsburgh, PA: MRS, 1987), p. 329.
D.G. Morris,Phil. Mag. A, 71 (1995), p. 1281.
K. Yoshimi, Ph.D. thesis, Tohoku University (1997).
E.P. George and I. Baker, submitted toPhil. Mag. A.
W. Köster and T. Gödecke,Z. Metallk., 71 (1980), p. 765.
Additional information
Author’s Note: All compositions are provided in mole percent.
Kyosuke Yoshimi earned his Ph.D. in materials science and engineering at Tohoku University in 1997. He is currently a research associate at Tohoku University.
Shuji Hanada earned his Ph.D. in materials science and engineering at Tohoku University. He is currently a professor at Tohoku University. Dr. Hanada is also a member of TMS.
Rights and permissions
About this article
Cite this article
Yoshimi, K., Hanada, S. The strength properties of iron aluminides. JOM 49, 46–49 (1997). https://doi.org/10.1007/BF02914403
Issue Date:
DOI: https://doi.org/10.1007/BF02914403