Article PDF
Avoid common mistakes on your manuscript.
Cited References
32Lin: J.O. Linde, “Electrical Properties of Dilute Alloys”,Ann. Phys., 15(226), 219–248 (1932) in German. (Equi Diagram; Experimental)
66Pri: A. Prince,Alloy Phase Equilibria, Elsevier, Amsterdam, 78 (1966). (Equi Diagram, Thermo; Review)
68Gor: P. Gordon,Principles of Phase Diagrams in Materials Systems, McGraw-Hill, New York, 140 (1968). (Equi Diagram, Thermo; Review)
68Sch: H.F. Schaake, “Thermal Expansion of Ir from 4.2 to 300 K”,J. Less-Common Met., 15, 103–105 (1968). (Crys Structure; Experimental)
68Sin: H.P. Singh, “Determination of Thermal Expansion of Ge, Rh, and Ir by X-Rays”,Acta Crystallogr. A, 24, 469–471 (1968). (Crys Structure; Experimental)
Indicates key paper69Rau: E. Raub and E. Roeschel, “Copper-Iridium Alloys”,Z. Metallkd., 60, 142–144 (1969) in German. (Equi Diagram, Crys Structure; Experimental; Indicates presence of a phase diagram)
79Les: A.G. Lesnik, V.V. Nemoshkalenko, and A.A. Ovcharenko, “Computer-Aided Calculation of Constitution Diagrams of Some Binary Alloys in the Subregular Solution Approximation”,Akad. Nauk Ukr. SSR., Metallofiz, 75, 20–31 (1979) in Russian. (Equi Diagram, Thermo; Theory; Indicates presence of a phase diagram.)
82Cha: D.J. Chakrabarti and D.E. Laughlin, “The Cu−Rh System”,Bull. Alloy Phase Diagrams., 2(4), 460–462 (1982). (Equi Diagram, Crys Structure; Compilation; Indicates presence of a phase diagram)
86Cha: D.J. Chakrabarti and D.E. Laughlin, “Critical Evaluation and Thermodynamic Modeling of Selected Copper Based Binary Alloys”, inNoble Metal Alloys, T.B. Massalski, W.B. Pearson, L.H. Bennett, and Y.A. Chang, Ed., TMS-AIME, Warrendale, PA, 247–264 (1986). (Thermo; Theory)
Author information
Authors and Affiliations
Additional information
Work was supported by the International Copper Research Association, Inc., (INCRA) and the Department of Energy through the Joint Program on Critical Compilation of Physical and Chemical Data coordinated through the Office of Standard Reference Data (OSRD), National Bureau of Standards. Literature searched through 1982. Professor Laughlin in ASM/NBS Data Program Category Editor for binary copper alloys.
Rights and permissions
About this article
Cite this article
Chakrabarti, D.J., Laughlin, D.E. The Cu−Ir (Copper-Iridium) system. JPE 8, 132–136 (1987). https://doi.org/10.1007/BF02873198
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02873198