Abstract
Dry etching of the magnetic thin films such as Ta, Fe, Co, NiFe, NiFeCo, and MnNi was carried out in inductively coupled plasmas of Cl2/Ar mixture. All the magnetic materials went through a maximum etch rate at 25% Cl2. The effects of the ICP source power and the rf chuck power on the etch rate and the surface roughness were quite dependent of the materials. An ion-enhanced chemical etch mechanism was important for the magnetic films. The surface roughness of the etched samples was relatively constant of the rf chuck power up to 200 W, but a rougher surface at a higher rf power was obtained. Post-etch cleaning of the etched samples in de-ionized water reduced the chlorine residues substantially.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Gallagher, W. J., Parkin, S. S. P., Lu, Y., Bian, X. P., Marley, A., Roche, K. P., Altman, R. A., Rishton, S. A., Jahnes, C., Shaw, T. M. and Xiao, G., “Microstructured Magnetic Tunnel Junctions”,J. Appl. Phys.,81, 3741 (1997).
Gokan, H. and Esho, S., “Pattern Fabrication by Oblique Incidence Ionbeam Etching,”J. Vac. Sci. Technol.,18, 23 (1981).
Hahn, Y. B. and Pearton, S. J., “A Unified Global Self-Consistent Model of a Capacitively and Inductively Coupled Plasma Etching System,”Korean J. Chem. Eng.,17, 304 (2000).
Hahn, Y. B., Choi, R. J., Hong, J. H., Park, H. J., Choi, C. S. and Lee, H. J., “High-density Plasma-induced Etch Damage of InGaN/GaN Multiple Quantum Well Light-emitting Diodes”,J. Appl. Phys.,92, 1189 (2002).
Hahn, Y. B., Hays, D. C., Cho, H., Jung, K. B., Abernathy, C. R. and Pearton, S. J., “Effect of Inert Gas Additive Species on Cl2 High Density Plasma Etching of Compound Semiconductors: Part I. GaAs and GaSb”,Appl. Surf. Sci.,147, 207 (1999).
Hahn, Y. B., Hays, D. C., Cho, H., Jung, K. B., Abernathy, C. R. and Pearton, S. J., “Effect of Inert Gas Additive Species on Cl2 High Density Plasma Etching of Compound Semiconductors: Part II. InP, InSb, InGaP and InGaAs”,Appl. Surf. Sci.,147, 215 (1999).
Hahn, Y. B., Hays, D. C., Donovan, S. M., Abernathy, C. R., Han, J., Shul, R. J., Cho, H., Jung, K. B. and Pearton, S. J., “Effect of Additive Noble Gases in Chlorine-based Inductively Coupled Plasma Etching of GaN, InN, and AlN,”J. Vac. Sci. Technol. A,17, 768 (1999).
Hahn, Y B., Lee, J. W., Vawter, G. A., Shul, R. J., Abernathy, C. R., Hays, D., Lambers, E. S. and Pearton, S. J., “Reactive Ion Beam Etching of GaAs and Related Compounds in an Inductively Coupled Plasma of Cl2Ar Mixture”,J. Vac. Sci. Technol. B,17, 366 (1999).
Hong, J., Caballero, J. A., Lambers, E. S., Childress, J. R., Pearton, S. J., Jenson, M. and Hurst, A. T., “High Density Plasma Etching of NiFe, NiFeCo and NiMnSb-Based Multilayers for Magnetic Storage Elements”,Appl. Surf. Sci.,138 (1999).
Im, Y H., Choi, C. S. and Hahn, Y B., “High Density Plasma Etching of GaN Films in Cl2/Ar Discharges with a Low-Frequency-Excited DC Bias,”J. Korean Phys. Soc.,39, 617 (2001).
Jung, K. B., Cho, H., Hahn, Y B., Hays, D. C., Lambers, E. S., Park, Y. D., Feng, T., Childress, J. R. and Pearton, S. J., “Effect of Inert Gas Additive on Cl2-Based Inductively Coupled Plasma Etching of NiFe and NiFeCo,”J. Vac. Sci. Technol. A,17, 2223 (1999).
Jung, K. B., Cho, H., Hahn, Y. B., Hays, D. C., Lambers, E. S., Park, Y. D., Feng, T., Childress, J. R. and Pearton, S. J., “Interhalogen Plasma Chemistries for Dry Etch Patterning of Ni, Fe, NiFe and NiFeCo Thin Films,”Appl. Surf. Sci.,140, 215 (1999).
Jung, K. B., Cho, H., Hahn, Y. B., Hays, D. C., Lambers, E. S., Park, Y. D., Feng, T., Childress, J. R. and Pearton, S. J., “Relative Merits of Cl2 and CO/NH3 Plasma Chemistries for Dry Etching of Magnetic Random Access Memory Device Elements”,J. Appl. Phys.,85, 4788 (1999).
Park, J. S., Kim, T.H., Choi, C. S. and Hahn, Y. B., “Dry Etching of Sr-Bi2Ta2O9: Comparison of Inductively Coupled Plasma Chemistries,”Korean J. Chem. Eng.,19, 486 (2002).
Tehrani, S., Chen, E., Durlam, M., DeHerrera, M., Slaughter, J. M., Shi, J. and Kerszykowski, G., “High Density Submicron Magnetoresistive Random Access Memory,”J. Appl. Phys.,85, 5822 (1999).
Vasile, M. J. and Mogab, C. J., “Chemically Assisted Sputter Etching of Permalloy Using CO or Cl2,”J. Vac. Sci. Technol. A,4, 1841 (1986).
Zhu, J.-G., Zheng, Y. and Prinz, G. A., “Ultrahigh Density Vertical Magnetoresistive Random Access Memory,”J. Appl. Phys.,87, 6668 (2000).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, H.J., Ra, HW., Song, K.S. et al. Inductively coupled plasma etching of Ta, Co, Fe, NiFe, NiFeCo, and MnNi with Cl2/Ar discharges. Korean J. Chem. Eng. 21, 1235–1239 (2004). https://doi.org/10.1007/BF02719500
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02719500