Abstract
As a part of the development of a gasoline processor for integration with a proton-exchanged membrane (PEM) fuel cell, we carried out the POX reforming reaction ofiso-octane, toluene and gasoline over a commercial methane reforming catalyst, and investigated the reaction conditions required to prevent the formation of carbon and the effect of fuel constituents and sulfur impurities in gasoline. The H2 and CO compositions increased with increasing reaction temperature, while those of CO2 and CH4 decreased. It is desirable to maintain an O/C molar ratio of more than 0.6 and an H2O/C molar ratio of 1.5 to 2.0 for vehicle applications. It has been found that carbon formation in the POX reforming ofiso-octane occurs below 620 °C, whereas in the case of toluene it occurs below 640 °C. POX reforming of gasoline constituents led to the conclusion that hydrogen production is directly related to the constituents of fuels and the operating conditions. It was also found that the coke formation on the surface of catalysts is promoted by sulfur impurities in fuels. For the integration of a fuel processor with PEM fuel cell, studies are needed on the development of new high-performance transition metal-based catalysts with sulfur and coke-resistance and the desulfurization of fuels before applying the POX reformer based on gasoline feed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Borroni-Bird, A. E., “Fuel Issues for Fuel Cell Vehicles,” Soc. Automotive Engineers, 952762, 2118 (1995).
Borup, R., Inbody, M., Hong, J.K., Morton, B. and Tafoya, J., “Fuel and Fuel Impurity Effect and Fuel Processing Catalysts,” 2000 Fuel Cell Seminar Abstract, Portland, OR, USA, 288 (2000).
Burch, R., Crittle, D. J. and Hayes, M. J., “C-H Bond Activation in Hydrocarbon Oxidation on Heterogeneous Catalysts,”Catal. Today,47, 227 (1999).
Chalk, S. G., Milliken, J., Miller, J. F. and Venkateswaran, S. R., “The US Department of Energy Investing in Clean Transport,”J. Power Source,71, 26 (1998).
Docter, A. and Lamn, A., “Gasoline Fuel Systems,”J. Power Source,84, 194 (1999).
DOE, Cost Analysis of Fuel Cell System for Transportation, Task 1 and 2 Final Report, Arthur D. Little Inc. (2000).
DOE, Multi-Fuel Reformers for Fuel Cells Used in Transportation, Multi-fuel Reformers Phase I. Final Report, DOE/CE/50343-2, Arthur D. Little Inc. (1994).
Flynn, T. J., Privette, R. M., Perna, M.A., Kneidel, K. E., King, D. L. and Cooper, M., “Compact Fuel Processor for Fuel Cell-Powered Vehicles,” Soc. Automotive Engineer., 1999-01-0536, 47 (1999).
Jeremy, P., Moon, D. J., Cory, P. and Levi, T., “Molybdenum Carbide Catalysts for Water-gas Shift,”Catal. Lett.,65, 193 (2000).
Kopasz, J. P., Applegate, D., Ruscic, L., Ahmed, S. and Krumpelt, K., “Effect of Gasoline Component on Fuel Processing and Implications for Fuel Cell Fuels,” 2000 Fuel Cell Seminar Abstract, Portland, OR, USA, 284 (2000).
Moon, D. J., Screekumar, K., Lee, S.D. and Lee, B. G., “Development of Gasoline Fuel Processor System for Fuel-Cell Powered Vehicles,”Theory and Applications of Chemical Engineering, Proceeding of 2000 KIChE Fall Meeting,6(2), 2313 (2000).
Moon, D. J., Screekumar, K., Lee, S. D., Lee, B. G. and Kim, H. S., “Studies on Gasoline Fuel Processor System for Fuel-Cell Powered Vehicles Application,”Appl. Catal. A: General,215, 1 (2001).
Pro-II reference manual, version 1.0, section 2.6, Simulation Science Inc., USA (1994).
Querini, A.A. and Fung, S.C., “Coke and Product Profile Foamed along the Catalyst Bed during n-Heptane Reforming,”J. Catal.,161, 263 (1996).
Raman, V., “The Hydrogen Fuel Option for Fuel Cell Vehicle Fleets,” Soc. Automotive Engineers, 1999-01-0529, 1 (1999).
Smith, W.R. and Missen, R.W., “Chemical Reaction Equilibrium Analysis: Theory and Algorithm,” Krieger publication company, USA (1991).
Sun, Y.K. and Lee, W. Y., “Catalytic Behavior of Yba2Cu3O7-x in the Partial Oxidation of Methanol to Formaldehyde,”Korean J. Chem. Eng.,12, 36 (1995).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Moon, D.J., Ryu, J.W., Lee, S.D. et al. Partial oxidation (POX) reforming of gasoline for fuel-cell powered vehicles applications. Korean J. Chem. Eng. 19, 921–927 (2002). https://doi.org/10.1007/BF02707212
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707212