Abstract
Pt thin film was deposited on alumina substrate by using DC sputter and the serpentine pattern was formed by photolithography to fabricate the resistance temperature detector (RTD). The Pt film was thermally treated and the surface structure of the film and its effect on the electrical resistance were studied. The sheet resistance of the film depends on the thickness and thermal treatment. The developing and etching conditions for serpentine patterning of the film were investigated and various RTD samples were prepared. All of the fabricated RTD’s show a good linear variation of resistance with the temperature. The temperature coefficient of resistance (TCR) values of RTD’s increased with decreasing film thickness, narrowing pattern line width, and increasing annealing temperature. The highest TCR value was obtained from RTD with 1 mm line width thermally treated at 700 ‡C and was 3.53×103 ppm/‡C.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Baxter, R. D. and Freud, P. J., “Thin Film Resistance Thermometer Device with a Predetermined Temperature Coefficient of Resistance and its Method of Manufacture”, US patent, 4375056 (1983).
Campbell, S. A., “The Science and Engineering of Microelectronic Fabrication”, Oxford University Press, New York (1996).
Choi, J. W., Min, J. H. and Lee, W. H., “Signal Analysis of Fiber-Optic Biosensor for the Detection of Organophosphorus Compounds in the Contaminated Water”,Korean J. Chem. Eng.,14, 101 (1997).
Dauphinee, T. M., “Temperature, Its Measurement and Control in Science and Industry”, American Institute of Physics, New York (1982).
Diehl, W. and Koehler, W., “Resistance Element for Resistance Thermometer and Process for Its Manufacturing”, US patent, 4103275 (1978).
Dziedzic, A., Golonka, L. J., Kozlowski, J., Licznerski, B. W. and Nitsch, K., “Thick-Film Resistive Temperature Sensors”,Meas. Sci. Technol.,8, 78 (1997).
Elliott, D., “Integrated Circuit Fabrication Technology”, McGraw-Hill, New York (1982).
Jeon, G. S., Han, M. H. and Seo, G., “Effect of ZnO Contents at the Surface of Brass-Plated Steel Cord on the Adhesion Property to Rubber Compound”,Korean J. Chem. Eng.,16, 248 (1999).
Jung, M. K., Hong, S. S. and Kim, M. H., “Application of Silicate-1 Film To a Surface Acoustic Wave Device Sensor”,Korean J. Chem. Eng.,15, 5 (1998).
Kennedy, R. H., “Selecting Temperature Sensor”,Chemical Engineering Progress,79, 54 (1983).
Lee, J., “Silicon IC Fabrication Technology”, 291, Daeyoung, Seoul (1991).
Lourenco, M. J., Serra, J. M., Nunes, M. R., Vallera, A. M. and Castro, C. A., “Thin-Film Characterization for High Temperature Applications”,International Journal of Thermophysics,19, 1253 (1998).
McGee, T. D., “Principles and Method for Temperature Measurement”, Wiley & Sons, New York (1988).
Okamura, K., “Sensa Katsuyou Zue Bukku”, Ohmsha, Ltd., Tokyo (1997).
Sachse, H. B., “Semiconducting Temperature Sensors and their Applications”, John Wiley & Sons, New York (1975).
Whang, K., “Sensor Technology”, Kijeon, Seoul (1994).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, J., Kim, J., Shin, Y. et al. A study on the fabrication of an RTD (resistance temperature detector) by using Pt thin film. Korean J. Chem. Eng. 18, 61–66 (2001). https://doi.org/10.1007/BF02707199
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707199