Abstract
The axial voidage profile was measured in a cold model circulating fluidized bed (0.38 m in diameter and 9.1 m in height) of sand particles as bed materials. Voidage in the riser column increases along the height above the distributor plate with increasing the gas velocity. However, it decreases with an increase in solid circulation rate in the bed. Model correlations to predict the solid circulation rale and the axial voidage profile in the bed are proposed.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Kobro, H. and Brereton, C.: in “Circulating Fluidized Bed Technology”,Proc. of the 1st Int. Conf. on Circulating Fluidized Beds, edited by P. Basu, 263(1985).
Tang, J.T. and Engstrom, F.:Proc. of the 1987 Int. Conf. on Fluidized Bed Combustion-FBC comes of age,1, 38(1987).
Li, Y. and Kwauk, M.: in “Fluidization”, edited by J.R. Grace and J.M. Matsen, Plenum Press, New York, 537 (1980).
Arena, U., Cammarota, A. and Pistone, L.: in “Circulating Fluidized Bed Technology”,Proc. of the 1st Int. Conf. on Circulating Fluidized Beds, edited by P. Basu, 119(1985).
Hartge, E.U., Li, Y. and Werther, J.: in “Circulating Fluidized Bed Technology”;Proc. of the 1st Int. Conf. on Circulating Fluidized Beds, edited by P. Basu, 153 (1985).
Yerushalmi, J. and Avidan, A.: in “Fluidization”, edited by J.F. Davidson, R. Clift and D. Harrison, 2nd ed., Academic Press, London, 225 (1985).
Kato, K., Shibasaki, H., Tamura, K., Wang, C. and Takarada, T.: in “Fluidization ’87: Korea-Japan”;Proc. of the 1st Korea-Japan Symp. on Fluidization, edited by W.H. Park and S.D. Kim, Pang-Han Pub. Co., Seoul, 229 (1987).
Son, J.E., Choi, J.H. and Lee, C.K.: in “Circulating Fluidized Bed Technology II”;Proc. of the 2nd Int. Conf. on Circulating Fluidized Beds, edited by P. Basu and J.F. Large, Pergamon Press, 113 (1988).
Son, J.E., Choi, J.H. and Lee, C.K.:HWAHAK KONGHAK,26, 599 (1988).
Zhang, R., Chen, D. and Yang, G.: “Fluidization ’85-Science and Technology”;Conference Papers of the 2nd China-Japan Symp., edited by M. Kwauk and D. Kunii, 148 (1985).
Kafa, C., Zhongyang, L. and Minging, N.:Proc. of the 1987 Int. Conf. on Fluidized Bed Combustion,1, 529(1987).
Choi, J.H., Son, J.E. and Kim, S.D.:J. Chem. Eng. Japan,22, 597 (1989).
Ishii, H., Nakajima, T. and Horio, M.:Proc. of the Asian Conf. on Fluidized-Bed & Three-Phase Reactors, edited by K. Yoshida and S. Morooka, 139 (1988).
Wen, C.Y. and Yu, Y.H.:AIChE J,12, 610(1966).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Choi, JH., Yi, CK. & Son, JE. Axial voidage profile in a cold model circulating fluidized bed. Korean J. Chem. Eng. 7, 306–309 (1990). https://doi.org/10.1007/BF02707183
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707183