Abstract
A high performance KIER-type CYBAGFILTER that combines a fabric filtration and centrifugal dust removal technology was developed to enhance the performance of conventional filtration systems. Based on the performance evaluation results obtained from a pilot-scale test and fluid dynamic computer simulation, a test CYBAGFILTER of 18,000 m3/hr capacity was installed in the clinker calcination process of Ssangyong Cement Co. located at Yongwol, Korea. Membrane filters for surface filtration were applied and evaluated. After 12-month operation, the mean pressure drop was maintained at 70–80 mmH2O, the collection efficiency was more than 99.8%, and the outlet dust concentration was less than 5 mg/Sm3. With an operating pressure drop of 100 mmH2O, the cleaning interval was much longer than that of conventional ones, promising the prolongation of filter life.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Boericke, R. R., Giles, W.G., Dietz, P.W., Kallio, G.A. and Kuo, J. T., “Electrocyclone for High-Temperature, High-Pressure Dust Removal,”J. Energy,7(1), 43 (1983).
Brinchman, G.A., Gill II, R. E. and Hrycak, M. B., “The Application of GORE-TEX Membrane Bags at a Tire-to-Energy Facility,” Incineration Conference Pro., Albuquerque, NM., May, 93 (1992).
Frederick, E. R., “Fibers, Electrostatics and Filtration; A Review of the New Technology,”JAPCA,30(4), 426 (1980).
Helfritch, D. J. and Quimby, J.M., “An Evaluation of a Pre-Charging Pulse-Jet Filter for Small Combustor Particulate Control,” Research-Cottrell Environmental Services & Technologies, Somervill, NJ, DOE/PC/89807-T5(DE91015133), (April 1991).
Kim, S.D., Park, Y.O., Lim, J.H., Son, J. E. and Jung, D.K., “Mathematical Simulation to Determine Optimum Module and Fluid Dynamic Characteristics of KIER Type CYBAGFILTER,” Theories and Application of Chemical Engineering, Proceedings of ’98 KIChE Spring Meeting,5, 865 (1999).
Kim, S.D., Park, Y.O., Lim, J.H., Son, J. E. and Jung, D.K., “Optimum Design of Inner Tube Type in KIER Type CYBAGFILTER,” Theories and Application of Chemical Engineering, Proceedings of ’98 KIChE Fall Meeting,4, 2801 (1998).
Miller, S. J., Schelkoph, G. L., Dunham, G. E., Walker, K. and Krigmont, K., “Advanced Hybrid Particulate Collector, A New Concept for Air Toxics and Fine-particle Control,” EPRI-DOE-EPA Combined Utility, Air Pollutant Control Mega Sym., Washington, D.C., Aug. 25–29 (1997).
Park, Y.O., Choi, H.K., Kim, S. D., Lim, J.H. and Son, J. E., “Development of High Efficiency Compact Hybrid Filtering System of Dust Precharging and Membrane Coated Filters,” The Ministry of Commerce, Industry and Energy, 1997-C-CC02-P-02, 105 (1999).
Park, Y.O., Kim, S. D., Lim, J.H., Choi, H. K., Kil, I. S. and Son, J. E., “Performance Characteristics of KIER Type CYBAGFILTER,” Proceedings, 1st Korean Conference on Aerosol and Particle Technology, 241 (1999).
Park, Y. O., “Overview of Novel Fabric Filtration Technologies,”J. of Korea Air Pollution Research Association,8(1), 16 (1995).
Plucinski, J., Gradon, L. and Nowicki, J., “Collection of Aerosol Particles in a Cyclone with an External Electric Field,”J. Aerosol Science,20(6), 695 (1989).
Son, J. E., Choi, H. K., Kim, S. D., Lim, J. H. and Park, Y. O., “Development of Domestic High Efficiency Fabric Filter System for Industries,” The Ministry of Environment, KIER-976621, 530 (1998).
Viner, A. S., Greiner, C. P. and Hovis, L. S., “Advanced Electrostatic Stimulation of Fabric Filtration; Performance and Ecnomics,”JAPCA,38(12), 1573 (1988).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Park, Y.O., Kim, S.D., Son, J.E. et al. Demonstration of a KIER-Type CYBAGFILTER system at the clinker calcination process. Korean J. Chem. Eng. 17, 579–584 (2000). https://doi.org/10.1007/BF02707170
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707170