Abstract
A dynamic simulation of a fully thermally coupled distillation column is conducted for the design of a possible operation scheme, and its performance is examined with an example process of butanol isomer ternary system. The outcome of the dynamic simulation indicates that the column can be operated by using a 3 × 3 control structure. The structure consists of three controlled variables of the compositions of overhead, bottom and side products and three manipulated variables of the flow rates of reflux and steam and liquid split ratio between a main column and a prefractionator.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Abdul Mutalib, M. I. and Smith, R., “Operation and Control of Dividing Wall Distillation Columns,”Trans. IChemE,76, Part A, 308 (1998).
Fidkowski, Z. and Krolikowski, L., “Thermally Coupled System of Distillation Columns,”AIChE J.,32, 537 (1986).
King, C. J., “Separation Processes,” 2nd edition, McGraw-Hill Book Co., New York (1971).
Luyben, W. L., “Process Modeling, Simulation and Control for Chemical Engineers,” 2nd edition, McGraw-Hill Book Co., New York (1990).
Petlyuk, F. B., Platonov, V. M. and Slavinskii, D.M., “Thermodynamically Optimal Method for Separating Multicomponent Mixtures,”Int. Chem. Eng.,5, 555 (1965).
Triantafyllou, C. and Smith, R., “The Design and Optimisation of Fully Thermally Coupled Distillation Columns,”Trans. IChemE,70, Part A, 118 (1992).
Wolff, E.A. and Skogestad, S., “Operation of Integrated Three-Product (Petlyuk) Distillation Columns,”Ind. Eng. Chem. Res.,34, 2094 (1995).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, Y.H. Design of a fully thermally coupled distillation column based on dynamic simulations. Korean J. Chem. Eng. 17, 570–573 (2000). https://doi.org/10.1007/BF02707168
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707168