Abstract
Preparation of semi-activated carbon fibers (SACFs) using a precursor consisting of coal tar pitch and phenolic resin coated on glass fiber was investigated. Stabilization of the fiber structure by crosslinking both the phenolic resin and coal tar pitch was essential to achieving high surface areas during high temperature activation. The phenolic resin was cured by using aqueous catalyst (hydrochloric acid/formaldehyde) followed by oxidative stabilization of the pitch. A surface area of 1,206 m2/g based on the precursor was obtained through activation using carbon dioxide/steam at 880 ‡C. The pore size distribution was shown to be vary narrow using the Horvath-Kawazoe (HK) method.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Economy, J. and Lin, R.Y., “Adsorption Characteristics of Activated Carbon Fibers,”Applied Polymer Symposium No.29, 199 (1976).
Economy, J., Lin, Y. and Murty, H.N., “Method for Producing Carbon Fibers,” US patent 3902220, 1975.
Economy, J., Michael, M. A. and Mangun, C. L., Proceedings of the 89th annual Meeting of Air and Waste Management Association, Nashville, Tennessee US (1996).
Gregg, S. J. and Sing, K. S.W., “Adsorption Surface Area and Porosity,” Academic Press, New York (1982).
Jeong, A. Y., Cho, D. H., Lee, S. H. and Kim, D. P., “Preparation of Activated Carbon Assembly by Using Glass Fabrics and Its SO2 Adsorption,”Journal of the Korean Ceramic Society,36, 756 (1999).
Mangun, C. L., Daley, M. A., Braatz, R. D. and Economy, J., “Effect of Pore Size on Adsorption of Hydrocarbons in Phenolic-based Activated Carbon Fibers,”Carbon,36, 123 (1998).
Mochida, I., Ling, L. and Korai, Y., “Some Factors for the High Performances of Mesophase Pitch Based Carbon Fibre,”J. Mater. Sci.,29, 3050 (1994).
Mochida, I., Toshima, H. and Korai, Y., “Oxygen Distribution in the Mesophase Pitch Fiber after Oxidative Stabilization,”J. Mater. Sci.,24, 389 (1989).
Russell, B. P. and LeVan, D. L., “Pore Size Distribution of BPL Activated Carbon Determined by Different Methods,”Carbon,32, 845 (1994).
Shimada, I. and Takahagi, T., “FT-IR Study of the Stabilization Reaction of Polyacrylonitrile in the Production of Carbon Fibers,”J. Pol. Sci.,24, 1989 (1986).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Baek, I. Preparation of semi-activated carbon fibers. Korean J. Chem. Eng. 17, 553–558 (2000). https://doi.org/10.1007/BF02707165
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02707165