Abstract
Thiol-functionalized ionic liquid (TFIL: 1,3-di(2’,3’-dimercaptoacetoxypropyl) imidazolium, 3′’-mercapto1 ″-propanesulfonic acid) as a stabilizer for preparing palladium (Pd) nanoparticles was synthesized. The suggested TFIL was designed to have thiol groups on both cation and anion as well as on symmetrical positions in cation. Transmission electron microscopy (TEM) shows that the average diameter of the palladium nanoparticles was 3.0 nm and that the standard deviation was 0.15 nm. The overall results strongly suggest that this potential TFIL can act as a highly effective stabilizer for the preparation of Pd nanoparticles
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bonnemann, H., Brijoux, W., Brinkmann, R., Dinjus, E., Jouben, T. and Korall, B.,“Formation of Colloidal Transition Metals in Organic Phases and Their Application in Catalysis,”Angew. Chem. Int. Ed., 30, 1312(1991).
Burst, M., Walker, M., Bethell, D., Shiffrin, D. J. and Whyman R.,“Synthesis of Thiol-derivatized Gold Nanoparticles in a 2-Phase Liquidliquid System,”J. Chem. Soc., Chem. Commun., 801 (1994).
Demberelnyamba, D., Kim, K.-S., Choi, S., Park, S.-Y., Lee, H., Kim, C.-J. and Yoo, I.-D.,“Synthesis and Antimicrobial Properties of Imidazolium and Pyrrolidinonium Salts,”Bioorg. Med. Chem.,12, 853 (2004).
Dubreuil, J. F. and Bazureau, P.,“Grafted Ionic Liquid-phase-supported Synthesis of Small Organic Molecules,”Tetrahedron Letters,42, 6097 (1999).
Kim, K.-S., Choi, S., Demberelnyamba, D., Lee, H., Oh, J., Lee, B.-B. and Mun, S.-J.,“Ionic Liquids Based onN-alkyl-N-Methylmorpholinium Salts as Potential Electrolytes,”Chem. Commun., 828 (2004a).
Kim, K.-S., Demberelnyamba, D. and Lee, H.,“Size-Selective Synthesis of Gold and Platinium Nanoparticles Using Novel Thiol-Functionalized Ionic Liquids,”Langmuir,20, 556 (2004b).
Kim, K.-S., Park, S.-Y., Choi, S. and Lee, H.,“Vapor Pressures of the 1-Butyl-3-methylimidazolium Bromide+Water, 1-Butyl-3-methylimidazolium Tetrafluoroborate+Water, and 1-(2-Hydroxyethyl)-3-methylimidazolium Tetrafluoroborate+Water Systems,”J. Chem. Eng. Data,49, 1550 (2004c).
Kim, K.-S., Shin, B.-K. and Lee, H.,“Physical and Electrochemical Properties of 1-Butyl-3-methylimidazolium Bromide, 1-Butyl-3-methylimidazolium Iodide, and 1-Butyl-3-methylimidazolium Tetrafluoroborate,”Korean J. Chem. Eng.,21, 1010 (2004d).
Kim, K.-S., Shin, B.-K., Lee, H. and Ziegler, F.,“Refractive Index and Heat Capacity of 1-Butyl-3-methylimidazolium Bromide and 1 -Butyl-3-methylimidazolium Tetrafluoroborate, and Vapor Pressure of Binary Systems for 1-Butyl-3-methylimidazolium Bromide+Trifluoroethanol and 1-Butyl-3-methylimidazolium Tetrafluoroborate+Trifluoroethanol,”Fluid Phase Equilibr.,218, 215 (2004e).
Marsh, K. N., Deev, A., Wu, A.C.-T., Tran, E. and Klamt, A.,“Room Temperature Ionic Liquids as Replacements for Conventional Solvents — A Review,”Korean J. Chem. Eng., 19, 357 (2002).
Ngo, H. L., Lecompte, K., Hargens, L. and McEwen, A. B.,“Thermal Properties of Imidazolium Ionic Liquids,”Thermochimica Acta,97, 357(2000).
Yonezawa, T. and Toshima, N.,“Mechanistic Consideration of Formation of Polymer-protected Nanoscopic Bimetallic Clusters,”J. Chem. Soc., Faraday Trans., 91, 4111 (1995).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kim, KS., Demberelnyamba, N.D., Yeon, SW. et al. One-phase preparation of palladium nanoparticles using thiol-functionalized ionic liquid. Korean J. Chem. Eng. 22, 717–720 (2005). https://doi.org/10.1007/BF02705788
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705788