Abstract
Single wafer rapid thermal processing (RTP) can be used for various wafer fabrication steps such as annealing, oxidation and chemical vapor deposition. A key issue in RTP is accurate temperature control, i.e., the wafer temperatures should be rapidly increased while maintaining uniformity of the temperature profile. A closed-loop identification method that suppresses RTP drift effects and maintains a linear operating region during identification tests is proposed. A simple graphical identification method that can be implemented on a field controller for autotuning and a nonlinear least squares method have been investigated. Both methods are tested with RTP equipment based on a design developed by Texas Instruments.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Cho, W.,Temperature control and modeling of the rapid thermal processing chamber, PhD Dissertation, Unversity of Texas at Austin (2005).
Cho, W., Balakrishnan, K. S., Edgar, T. F. and Trachtenberg, I.,Control of remote plasma-enhanced chemical vapor deposition ofsilicone nitride,5th Int. Symp. on Process Systems Engineering, Korea, 1235 (1994).
Choi, J. Y. and Do, H. M., “A learning approach of wafer temperature control in a rapid thermal processing system,”IEEE Trans. Semiconductor Manufacturing,14, 1 (2001).
Choi, J. Y., Do, H. M. and Choi, H. S., “Adaptive control approach of rapid thermal processing,”IEEE Trans. Semiconductor Manufacturing, 16, 621 (2003).
Edgar, T. F., Himmelblau, D. M. and Lasdon, L. S.,Optimization of chemical processes 2sund ed., McGraw-Hill, New York (2001).
Huang, I., Liu, H. H. and Yu, C. C., “Design for control: temperature uniformity in rapid thermal processor,”Korean J. Chem. Eng.,17, 111(2000).
Koo, D. G., Park, H. C., Choi, J. Y. and Lee, J., “Sequential loop closing identification of multivariable processes using the biased relay feedback method,”Chem. Eng. Comm., 191, 611 (2004).
Lee, J., “On-line PID controller tuning from a single closed-loop test,”AIChE J., 35, 329 (1989).
Lee, K. S., Lee, J., Chin, I., Choi, J. and Lee, J. H., “Control of wafer temperature uniformity in rapid thermal processing using an optimal iterative learning control technique,”Ind. Eng. Chem. Research,40, 1661 (2001).
Lee, Y., Park, S., Lee, M. and Brosilow, C., “PID controller tuning for desired closed-loop responses for SI/SO systems,”AIChE Journal, 44, 106 (1998).
Lin, C. A. and Jan, Y K., “Control system design for a rapid thermal processing system,”IEEE Trans. Control System Technology, 9, 122 (2001).
Schaper, C. D., Kailath, T. and Lee, Y.J., “Decentralized control of wafer temperature for multizone rapid thermal processing systems,”IEEE Trans. Semiconductor Manufacturing, 12, 193 (1999).
Schaper, C. D., Moslehi, M. M., Saraswat, K. C. and Kailath, T., “Modeling, identification, and control of rapid thermal processing systems,”J. Electrochem. Soc., 141, 3200 (1994).
Seborg, D. E., Edgar, T. F. and Mellichamp, D. A.,Process dynamics and control, 2nd ed., Wiley, New York (2004).
Yeo, Y K., Kwon, T. I. and Lee, K. W., “An energy effective PID tuning method for the control of polybutadiene latex reactor based on closed-loop identification,”Korean J. Chem. Eng.,21, 935 (2004).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cho, W., Edgar, T.F. & Lee, J. Closed-loop identification of wafer temperature dynamics in a rapid thermal process. Korean J. Chem. Eng. 23, 171–175 (2006). https://doi.org/10.1007/BF02705711
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705711