Abstract
The present work is a study of the thermal properties and electrochemical stabilities of N-ethyl-N-methylmorpholinium bromide ([Mor1,2][Br]), N-butyl-N-methylmorpholinium bromide ([Mor11,4][Br]), N-octyl-N-methylmorpholinium bromide ([Mor11,8][Br]), N-dodecyl-N-methylmorpholinium bromide ([Mor11,12][Br]), and N,N-dihydroxyethylmorpholinium bromide ([DHEMor][Br]). The melting points, decomposition temperatures, and electrochemical stabilities of the salts were measured by DSC (differential scanning calorimetry), TGA (thermogravimetric analysis), and CV (cyclic voltammogram), respectively. All salts were decomposed below approximately 230.00 °C and their melting points were above 100.00 °C except [DHEMor][Br], which melted at 75.17 °C. [DHEMor][Br] appeared to possess the most wide liquid-phase range between melting point and decomposition temperature. The electrochemical windows of salts ranged from 3.3 V for [Mor1,8][Br] to 3.6 V for [Mor1,4][Br] and thus did not show any noticeable variation with cations used for salt synthesis.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Bonhote, P., Dias, A. P., Papageorgiou, N., Kalyanasundaram, K. and Gratzel, M., “Hydrophobic, Highly Conductive Ambient-temperature Molten Salts,”Inorg. Chem.,35, 1168 (1996).
Forsyth, S., Golding, J., MacFarlane, D. R. and Forsyth, M., “N-Methyl-N-alkylpyrrolidinium Tetrafluoroborate Salts: Ionic Solvent and Solid Electrolytes,”ElectrochimicaActa,46(10−11), 1753 (2001).
Hagiwara, R., Matsumoto, K., Nakamori, Y., Tsuda, T., Ito, Y., Matsumoto, H. and Momota, K., “Physicochemical Properties of 1,3-Dialkylimidazolium Fluorohydrogenate Room-temperature Molten Salts,”J. Electrochem. Soc.,150(12), D195 (2003).
Hagiwara, R. and Ito, Y., “Room Temperature Ionic Liquids of Alkylimidazolium Cations and Fluoroanions,”J. Flouorine Chem.,105(2), 221 (2000).
Kim, K.-S., Choi, S., Demberelnyamba, D., Lee, H., Oh, J., Lee, B.-B. and Mun, S.-J., “Ionic Liquids Based on N-Alkyl-N-methylmorpholinium Salt as Potential Electrolytes,”Chem. Commun.,2004(7), 828 (2004a).
Kim, K.-S., Demberelnyamba, D. and Lee, H., “Size Selective Synthesis of Gold and Platinium Nanoparticle using Novel Thiol-functionized Ionic Liquids,”Langmuir,20(3), 556 (2004b).
MacFarlane, D. R., Huang, J. and Forsyth., M., “Lithium-doped Plastic Crystal Electrolytes Exhibiting Fast Ion Conduction for Secondary Batteries,”Nature,402, 792 (1999).
Marsh, K. N., Deev, A., Wu, A. C.-T., Tran, E. and Klamt, A., “Room Temperature Ionic Liquids as Replacements for Conventional Solvents — A Review,”Korean J. Chem. Eng.,19, 357 (2002).
Ngo, H. L., Lecompte, K., Hargens, L. and McEwen, A. B., “Thermal Properties of Imidazolium Ionic Liquids,”Thermochimica Acta,97, 357 (2000).
Welton, T., “Room-Temperature Ionic Liquids. Solvents for Synthesis and Catalysis,”Chem. Rev.,99, 2071 (1999).
Yoshizawa, M., Ogihara, W. and Ohno, H., “Novel Polymer Electrolytes Prepared by Copolymerization of Ionic Liquid Monomers,”Polymers for Advanced Technologies,13(8), 589 (2002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cha, JH., Kim, KS., Choi, S. et al. Thermal and electrochemical properties of morpholinium salts with bromide anion. Korean J. Chem. Eng. 22, 945–948 (2005). https://doi.org/10.1007/BF02705680
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705680