Abstract
Catalytic burners for fuel cell power plant reformers are alternatives to conventional flame burners. Their application is expected to provide uniform temperatures in the reformer, efficient use of low-calorific gaseous by products and reduction of pollutant emissions. For testing in the burners, a series of spherical Pd/CeO2/Al2O3 catalysts were prepared. An optimum concentration of ceria providing the highest thermal stability of catalysts was determined. An effect of catalyst activation in the reaction mixture-1% methane in air was observed. A series of Mn containing oxide catalysts on spherical γ-Al2O3 or (γ+Χ)-Al2O3, both pure and doped with La, Ce and Mg oxides were prepared. The catalysts were characterized by chemical analysis, X-ray phase analysis, BET surface area and activity measurements in methane oxidation. A batch of Mn-Mg-La-Al-O catalyst was prepared for further long-term testing in a model reformer with a catalytic burner. A model reformer with a catalytic burner was designed and fabricated for testing in the composition of the bench-scale Fuel Cell Power Plant. Preliminary testing of this catalyst showed that it provided complete methane combustion at the specified operational temperatures over 900 °C.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Arai, H., Yamada, T., Equchi, K. and Seiyama, T., “Catalytic Combustion of Methane over Various Perovskyte-Type Catalysts”,Appl. Catal. A,26, 265 (1986).
Ciaparu, D. and Pffeferle, L., “Support and Water Effects on Palladium Based Methane Combustion Catalysts”,Appl. Catal. A,209, 415 (2001).
Deng, Y. and Nevel, T. G., “Non-steady Activity During Methane Combustion over Pd/Al2O3 and the Influences of Pt and CeO2 Additives”,Catal. Today,47, 279 (1999).
Euzen, P., Le Gal, J.-H., Rebours, B. and Martin, G, “Deactivation of Palladium Catalyst in Catalytic Combustion of Methane”,Catal. Today,47, 19 (1999).
Fernandez-Garcia, M., Martinez-Arias, A., Iglesias-Juez, A., Hungria, A. B., Conesa, J. C. and Soria, I, “New Pd/CexZr1-x/Al2O3 TreeWay Catalysts Prepared by Microemulsion. Part 1. Characterization and Catalytic Behavior in CO Oxidation”,Appl. Catal.,B31, 39 (2001).
Frety, R, Levy, J., Perrichon, V., Pichon, V., Primet, M., Rogemond, E., Essayem, N, Chevrier, M., Gautier, C. and Mathis, F, “Preparation of Alumina Supported Ceria. I: Selective Measurement of the Surface Area of Ceria and Free Alumina”, Proc. 3rd Intern. Congr. on Catalysis and Automotive Pollution Control, CAPOC-3. Brussels, Belgium,2, 265 (1994).
Groppi, G, Cristiani, C., Lietti, L., Ramella, C., Valentini, M. and Forzatti, P., “Effect of Ceria on Palladium Supported Catalysts for High Temperature Combustion of CH4 under Lean Conditions”,Catal. Today,50, 399 (1999).
Ismagilov, Z. R., Shkrabina, R. A. and Koryabkina, N. A., “Hydrocarbon-Ammonia Moulding. A New Technology for Production of Combustion Catalysts”,Korean J. Chem. Eng.,14, 153 (1997).
Ismagilov, Z. R., Shkrabina, R. A. and Koryabkina, N. A., “New Technology for Production of Spherical Alumina Supports for Fluidized Bed Combustion”,Catal. Today,47, 51 (1999).
Lyubovsky, M. and Pfefferle, L., “Complete Methane Oxidation over Pd Catalyst Supported on α-Alumina. Influence of Temperature and Oxygen Pressure on the Catalyst Activity”,Catal. Today,29, 279 (1999).
Shepeleva, M. N., Shkrabina, R. A. and Ismagilov, Z. R., “Improvement of the Hydrocarbon-Ammonia Granulation Method for Production of Spherical A12O3 with Variable Properties”,Technol. Today, 3, 150 (1990).
Shkrabina, R. A., Koryabkina, N. A., Ushakov, V. A., Lausberg, M., Moroz, E. M. and Ismagilov, Z. R., “Studies of Reactions and Catalysts of Fuel Combustion. XIV. Thermal Stability of the System La2O3-Al2O3 Kinetika i Kataliz,37, 116(1996).
Tsykoza, L. T, Ismagilov, Z. R., Shkrabina, R A., Koryabkina, N A., Shikina, N. V, Arendarskii, D. A., Ushakov, V A. and Kalinkin, V A., “Effect of the Phase Composition of Alumina Supports on the Properties of the Mn-Al-O Catalysts for High Temperature Oxidation”, The Second Intern. Memorial G. K. Boreskov Conf. Catalysis on the Eve of XXI Century. Science and Engineering, Novosibirsk, Russia, Abstr., Part II, 410 (1997).
Tsykoza, L. T, Shkrabina, R. A., Koryabkina, N. A., Ushakov, V A., Shikina, N. V. and Ismagilov, Z. R, “Synthesis and Study of Manganeses Oxide Catalysts Based on Modified γ-Alumina for High Temperature Oxidation Processes”, 7th Nordic Symp. on Catalysis, Turku, Finland, — Book of Abstr., 32 (1996).
Tsykosa, L. T, Yashnik, S. A., Ismagilov, Z. R, Shkrabina, R A., Koryabkina, N A. and Kuznetsov, V V, “Catalyst for High Temperature Combustion of Hydrocarbon Fuels”, Ru Patent, 2185238, 2002.
Williams, M. C., “Stationary Power Fuel Cell Commercialization. Status Worldwide”, 1996 Fuel Cell Seminar, Program and Abstracts, pp. 1–3, Courtesy Associates, Washington DC. (1996).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ismagilov, Z.R., Kerzhentsev, M.A., Sazonov, V.A. et al. Study of catalysts for catalytic burners for fuel cell power plant reformers. Korean J. Chem. Eng. 20, 461–467 (2003). https://doi.org/10.1007/BF02705548
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF02705548